Limitations of recreational camera traps for wildlife management and conservation research: A practitioner’s perspective

The availability of affordable ‘recreational’ camera traps has dramatically increased over the last decade. We present survey results which show that many conservation practitioners use cheaper ‘recreational’ units for research rather than more expensive ‘professional’ equipment. We present our perspective of using two popular models of ‘recreational’ camera trap for ecological field-based studies. The models used (for >2 years) presented us with a range of practical problems at all stages of their use including deployment, operation, and data management, which collectively crippled data collection and limited opportunities for quantification of key issues arising. Our experiences demonstrate that prospective users need to have a sufficient understanding of the limitations camera trap technology poses, dimensions we communicate here. While the merits of different camera traps will be study specific, the performance of more expensive ‘professional’ models may prove more cost-effective in the long-term when using camera traps for research.     

Enhanced science–stakeholder communication to improve ecosystem model performances for climate change impact assessments

In recent years, climate impact assessments of relevance to the agricultural and forestry sectors have received considerable attention. Current ecosystem models commonly capture the effect of a warmer climate on biomass production, but they rarely sufficiently capture potential losses caused by pests, pathogens and extreme weather events. In addition, alternative management regimes may not be integrated in the models. A way to improve the quality of climate impact assessments is to increase the science–stakeholder collaboration, and in a two-way dialog link empirical experience and impact modelling with policy and strategies for sustainable management. In this paper we give a brief overview of different ecosystem modelling methods, discuss how to include ecological and management aspects, and highlight the importance of science–stakeholder communication. By this, we hope to stimulate a discussion among the science–stakeholder communities on how to quantify the potential for climate change adaptation by improving the realism in the models.     

Decline and diversity in Swedish seas: Environmental narratives in marine history,science and policy

Ambio - Before the mid-twentieth century, there was no comprehensive narrative about empirical conditions in Swedish seas. Around 1970, this view changed profoundly. In line with growing research...     

The Properties of Poly(<Emphasis Type="SmallCaps">l</Emphasis>-Lactide) Prepared by Different Synthesis Procedure

Different synthesis methods were applied to determine optimal conditions for polymerization of (3S)-cis-3,6-dimethyl-1,4-dioxane-2,5-dione (l-lactide), in order to obtain poly(l-lactide) (PLLA). Bulk polymerizations (in vacuum sealed vessel, high pressure reactor and in microwave field) were performed with tin(II) 2-ethylhexanoate as the initiator. Synthesis in the vacuum sealed vessel was carried out at the temperature of 150 °C. To reduce the reaction time second polymerization process was carried out in the high pressure reactor at 100 °C and at the pressure of 138 kPa. The third type of rapid synthesis was done in the microwave reactor at 100 °C, using frequency of 2.45 GHz and power of 150 W at the temperature of 100 °C. The temperature in this method was controlled via infrared system for in-bulk measuring. The solution polymerization (with trifluoromethanesulfonic acid as initiator) was possible even at the temperature of 40 °C, yielding PLLA with narrow molecular weight distribution in a very short period of time (less than 6 h). The obtained polymers had the number-average molecular weights ranging from 43,000 to 178,000 g mol⁻¹ (polydispersity index ranging from 1 to 3) according to the gel permeation chromatography measurements. The polymer structure was characterized by Fourier transform infrared and NMR spectroscopy. Thermal properties of the obtained polymers were investigated using thermogravimetry and differential scanning calorimetry.     

Preparation and Properties of Starch/Nanosilicate Layer/Polycaprolactone Composites

Starch nanocomposites have been prepared using mineral clay. Montmorillonite, kaolin and a surface-modified montmorillonite by dimethyl (hydrogenated tallow alkyl) ammonium cation were used. Starch-g-PCL nanocomposites have been prepared with graft polymerization through in situ ring-opening polymerization of ε-caprolactone in the presence of starch, Sn(Oct)₂ (Tin(II) 2-ethyl hexanoate) as an initiator/catalyst and silicate layers. In fact, the related composites were prepared in solution method, bulk polymerization and in situ polymerization methods with introducing the mineral clay. The effect of kind of clay on d-spacing of silicate layers was investigated and the obtained nanocomposites were analyzed using X-ray diffraction. The obtained compounds were characterized by Fourier transform infrared (FT-IR). Morphology of the prepared nanocomposites was investigated using scanning electron microscopy and DSC enhanced the study of thermal behaviour of the prepared composite compounds.     

Temporal and Spatial Relationships Between Watershed Land Use and Salt Marsh Disturbance in a Pacific Estuary

Historical and recent remote sensing data can be used to address temporal and spatial relationships between upland land cover and downstream vegetation response at the watershed scale. This is demonstrated for sub-watersheds draining into Elkhorn Slough, California, where salt marsh habitat has diminished because of the formation of sediment fans that support woody riparian vegetation. Multiple regression models were used to examine which land cover variables and physical properties of the watershed most influenced sediment fan size within 23 sub-watersheds (1.4 ha to 200 ha). Model explanatory power increased (adjusted R(2) = 0.94 vs. 0.75) among large sub-watersheds (>10 ha) and historical watershed variables, such as average farmland slope, flowpath slope, and flowpath distance between farmland and marsh, were significant. It was also possible to explain the increase in riparian vegetation by historical watershed variables for the larger sub-watersheds. Sub-watershed area is the overriding physical characteristic influencing the extent of sedimentation in a salt marsh, while percent cover of agricultural land use is the most influential land cover variable. The results also reveal that salt marsh recovery depends on relative cover of different land use classes in the watershed, with greater chances of recovery associated with less intensive agriculture. This research reveals a potential delay between watershed impacts and wetland response that can be best revealed when conducting multi-temporal analyses on larger watersheds.     

Initial Screening of Contaminated Land: A Comparison of US and Swedish Methods

Preliminary surveys are used to prioritize between contaminated sites to select those to be investigated more thoroughly. The data-gathering steps are almost identical between countries; however, the assessment procedures differ significantly. In this study, we have investigated 21 contaminated sites assessed as belonging to the high-risk or the very high-risk class using the Swedish Methods for Inventories of Contaminated Sites (MICS). We then applied the US Preliminary Assessment (PA) method to the same sites and compared the results and conclusions from the two screening procedures. In both cases, all sites were recommended for further investigation and the two approaches seem to corroborate one another; however, the PA assessment scores and the preliminary MICS classifications did not correlate. The results obtained with the PA method were easier to explain than the final MICS classification. The PA method also seems more transparent and easier to standardize, although objections could be made regarding the weighting scheme, because the outcome in this study was entirely dependent on the surface exposure pathway. However, to examine this in greater detail, it is necessary to include sites with less contamination: The importance of preliminary surveys in the overall risk management process gives a strong motivation for such an evaluation. Generally, the lack of research and scientific support for the various assessment procedures in use suggests that there is a need for method development, standardization, and validation.     

Prioritizing Wetland Restoration for Sediment Yield Reduction: A Conceptual Model

In a climate of limited resources, it is often necessary to prioritize restoration efforts geographically. The synoptic approach is an ecologically based tool for geographic prioritization of wetland protection and restoration efforts. The approach was specifically designed to incorporate best professional judgment in cases where information and resources are otherwise limited. Synoptic assessments calculate indices for functional criteria in subunits (watersheds, counties, etc.) of a region and then rank the subunits. Ranks can be visualized in region-scale maps which enable managers to identify areas where efforts optimize functional performance on a regional scale. In this paper, we develop a conceptual model for prioritizing watersheds whose wetlands can be restored to reduce total sediment yield at the watershed outlet. The conceptual model is designed to rank watersheds but not individual wetlands within a watershed. The synoptic approach is valid for applying the sediment yield reduction model because there is high demand for prioritizing disturbed wetlands for restoration, but there is limited, quantitative, accurate information available with which to make decisions. Furthermore, the cost of creating a comprehensive database is prohibitively high. Finally, because the model will be used for planning purposes, and, specifically, for prioritizing based on multiple decisions rather than optimizing a single decision, the consequence of prioritization errors is low. Model results cannot be treated as scientific findings. The conclusions of an assessment are based on judgement, but this judgement is guided by scientific principles and a general understanding of relevant ecological processes. The conceptual model was developed as the first step towards prioritizing of wetland restoration for sediment yield reduction in US EPA Region 4.     

Forest protection and economic development by offshoring wood extraction: Bhutan’s clean development path

With globalization, virtual exchanges of natural resources embodied in traded commodities redistribute geographically land use and its environmental impacts. Benefits of national forest protection may be undermined at the global-scale by leakage through international trade. We studied land use displacement associated with national policies to protect forests in Bhutan. This case study provides a simple situation: a dominant forest cover almost unaffected by agricultural expansion, a rural economy dominated by the primary sector, centralized forest conservation policies, and a dominant trading partner. We assessed the net effects at the international level of the Bhutanese forest protection policies by accounting for trade in wood products with India. Our results show that these policies have been effective in maintaining a high forest cover, but have been accompanied by an increasing displacement of forest use to India. In 1996–2011, the difference between the total volume of wood imported from India and the total volume exported from Bhutan—i.e., the net displacement—corresponds to 27 % of the total volume consumed in Bhutan. In 2011, 68 % of the total forest area required to produce the wood consumed in Bhutan was located in India. The wood imported by Bhutan was likely originating from tree plantations in the northeastern Indian states. Since Bhutan has few tree plantations and very valuable natural forests, the net international-level ecological impacts of this land use displacement is arguably positive. Most of the wood imports of Bhutan were wood charcoal for its emerging chemical industries. This case of displacement reflects functional upgrading in the value-chain rather than an externalization of consumption-based environmental costs. Through its government policies, Bhutan has managed to support its economic development while protecting its forests and leapfrogging the negative impacts on forests generally associated with the early stages of modernization.