Fate and availability of glyphosate and AMPA in agricultural soil

The fate of glyphosate and its degradation product aminomethylphosphonic acid (AMPA) was studied in soil. Labeled glyphosate was used to be able to distinguish the measured quantities of glyphosate and AMPA from the background values since the soil was sampled in a field where glyphosate had been used formerly. After addition of labeled glyphosate, the disappearance of glyphosate and the formation and disappearance of AMPA were monitored. The resulting curves were fitted according to a new EU guideline. The best fit of the glyphosate degradation data was obtained using a first-order multi compartment (FOMC) model. DT(50) values of 9 days (glyphosate) and 32 days (AMPA) indicated relatively rapid degradation. After an aging period of 6 months, the leaching risk of each residue was determined by treating the soil with pure water or a phosphate solution (pH 6), to simulate rain over a non-fertilized or fertilized field, respectively. Significantly larger (p < 0.05) amounts of aged glyphosate and AMPA were extracted from the soil when phosphate solution was used as an extraction agent, compared with pure water. This indicates that the risk of leaching of aged glyphosate and AMPA residues from soil is greater in fertilized soil. The blank soil, to which 252 g glyphosate/ha was applied 21 months before this study, contained 0.81 ng glyphosate/g dry soil and 10.46 ng AMPA/g dry soil at the start of the study. Blank soil samples were used as controls without glyphosate addition. After incubation of the blank soil samples for 6 months, a significantly larger amount of AMPA was extracted from the soil treated with phosphate solution than from that treated with pure water. To determine the degree of uptake of aged glyphosate residues by crops growing in the soil, (14)C-labeled glyphosate was applied to soil 6.5 months prior to sowing rape and barley seeds. After 41 days, 0.006 +/- 0.002% and 0.005 +/- 0.001% of the applied radioactivity was measured in rape and barley, respectively.     

Sustainably Harvesting a Large Carnivore? Development of Eurasian Lynx Populations in Norway During 160 Years of Shifting Policy

The management of large carnivores in multiuse landscapes is always controversial, and managers need to balance a wide range of competing interests. Hunter harvest is often used to limit population size and distribution but is proving to be both controversialand technically challenging. Eurasian lynx (Lynx lynx) are currently managed as a game species in Norway. We describe an adaptive management approach where quota setting is based on an annual census and chart the population development through the period 1996–2008, as management has become significantly more sophisticated and better informed by the increased availability of scientific data. During this period the population has been through a period of high quotas and population decline caused by fragmented management authority and overoptimistic estimates of lynx reproduction, followed by a period of recovery due to quota reductions. The modern management regime is placed in the context of shifting policy during the last 160 years, during which management goals have moved from extermination stimulated by bounties, through a short phase of protection, and now to quota-regulated harvest. Much management authority has also been delegated from central to local levels. We conclude that adaptive management has the potential to keep the population within some bounded limits, although there will inevitably be fluctuation.     

In Search of Stability – Investigating Flexible and Stable Production Strategies for an Optimised Steel Plant

It is crucial for a steel making production system to operate at the lowest possible production cost, while satisfying stability and reliability conditions. To plan future production strategies, it is therefore important to be able to model the system behaviour when internal and external parameters are changed. In this study the sensitivity and stability of an optimised solution, of an integrated steel plant, have been investigated. The solution’s sensitivity has been analysed taking both internal process changes and external price variations into account, through applying both simulation and optimisation. The analysis also includes both costs and environmental issues such as carbon dioxide and sulphur emissions. Based on the methodology suggested, it is possible to determine the stability of the system solution, including both economic and environmental performance.     

Characterization of Shredder Residues generated and deposited in Denmark

This study presents a detailed characterization of Shredder residues (SR) generated and deposited in Denmark from 1990 to 2010. It represents approximately 85% of total Danish SR. A comprehensive sampling, size fractionation and chemical analysis was carried out on entire samples as well as on each individual size fraction. All significant elemental contents except oxygen were analyzed. The unexplained “balance” was subsequently explained by oxygen content in metal oxides, carbonates, sulphates and in organics, mainly cellulose. Using mass and calorific balance approaches, it was possible to balance the composition and, thereby, estimate the degree of oxidation of elements including metals. This revealed that larger fractions (>10 mm, 10–4 mm, 4–1 mm) contain significant amount of valuable free metals for recovery. The fractionation revealed that the >10 mm coarse fraction was the largest amount of SR being 35–40% (w/w) with a metal content constituting about 4–9% of the total SR by weight and the <1 mm fine fraction constituted 27–37% (w/w) of the total weight. The lower heat value (LHV) of SR samples over different time periods (1990–2010) was between 7 and 17 MJ/kg, declining with decreasing particle size. The SR composition is greatly dependent on the applied shredding and post shredding processes at the shredding plants causing some variations. There are uncertainties related to sampling and preparation of samples for analyses due to its heterogeneous nature and uncertainties in the chemical analyses results (≈15–25%). This exhaustive characterization is believed to constitute hitherto the best data platform for assessing potential value and feasibility of further resource recovery from SR.     

Bias from two analytical laboratories involved in a long-term air monitoring program measuring organic pollutants in the Arctic: a quality assurance/quality control assessment

Initiated in 1992, air monitoring of organic pollutants in the Canadian Arctic provided spatial and temporal trends in support of Canada's participation in the Stockholm Convention of Persistent Organic Pollutants. The specific analytical laboratory charged with this task was changed in 2002 while field sampling protocols remained unchanged. Three rounds of intensive comparison studies were conducted in 2004, 2005, and 2008 to assess data comparability between the two laboratories. Analysis was compared for organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) in standards, blind samples of mixed standards and extracts of real air samples. Good measurement accuracy was achieved for both laboratories when standards were analyzed. Variation of measurement accuracy over time was found for some OCPs and PCBs in standards on a random and non-systematic manner. Relatively low accuracy in analyzing blind samples was likely related to the process of sample purification. Inter-laboratory measurement differences for standards (<30%) and samples (<70%) were generally less than or comparable to those reported in a previous inter-laboratory study with 21 participating laboratories. Regression analysis showed inconsistent data comparability between the two laboratories during the initial stages of the study. These inter-laboratory differences can complicate abilities to discern long-term trends of pollutants in a given sampling site. It is advisable to maintain long-term measurements with minimal changes in sample analysis.     

A Heat Dynamic Model for Intelligent Heating of Buildings

This article presents a heat dynamic model for prediction of the indoor temperature in an office building. The model has been used in several flexible load applications, where the indoor temperature is allowed to vary around a given reference to provide power system services by shifting the heating of the building in time. This way the thermal mass of the building can be used to absorb energy from renewable energy source when available and postpone heating in periods with lack of renewable energy generation. The model is used in a model predictive controller to ensure the residential comfort over a given prediction horizon.     

Using the useful: characteristics of used palms in south-eastern Ecuador

Plant families differ greatly with regard to their usefulness to humans. Within families there are also large differences in the usefulness between species; some are used for many different purposes, while most are used for few or no purposes. Which ones and to what extent species are used often varies between areas and cultural groups. To better understand variation in speciesȁ9 usefulness we studied the use of different palm species (Arecaceae) among two socio-cultural groups (one indigenous and one colonist group of mixed ethnic descent) living in the same area. We used regression and correlation analyses to determine to what degree use is related to ecological and morphological characteristics, to geographical differences in abundance, and to peopleȁ9s perceptions of speciesȁ9 availability. We found that abundance and height were the most important characteristics related to use, possibly due to the effect of height and abundance on salience, search time, and (for height) suitability for different purposes. Abundance was most important for palm heart extraction, probably due to the opportunistic nature of this activity. There was no difference between socio-cultural groups with regard to the relationship between palm abundance and use, but abundance seemed to be more decisive for people who used moderate amounts of palms. Finally, it was seen that peopleȁ9s estimates of palm abundance were not related to our measurements of abundance, which may be due to use of different spatial scales in evaluating abundance and to the subjective nature of terms such as “rare” and “abundant”.     

Feeding frequency and parental division of labour in the double-brooded great tit Parus major

Summary We studied the relative contribution of each sex and total effort expended in feeding nestlings in the great tit Parus major in relation to artificially altered brood size. A recent model suggests that feeding frequency should reflect the optimal trade-off between parental and fledgling survival, the former being negatively, the latter positively, influenced by high feeding frequencies. In both sexes weight loss was linearly related to feeding frequency. Since fledgling survival increases with nestling weight, the conditions of this model are fulfilled. However, in contrast to the predictions of the model, the total feeding frequency for both sexes combined did not differ between control and enlarged broods, but was lower for reduced ones. This outcome was not the result of a physiologically related inability of the parents to increase their delivery rate. Instead, we suggest that parents with enlarged broods could not find sufficient amounts of prey large enough to be economically worth transporting to the nest. Differences in brood-provisioning rates between the sexes may arise because costs and benefits of feeding nestlings may differ. Females lost more weight than males during the nesting period, but maintained a relatively higher weight during the incubation period. The relationship between weight loss and feeding frequency was similar for both sexes. Male and female brood-feeding frequency was related to brood size in a similar way. This is discussed in light of the great tit's mating system and the fact that the great tit is facultatively double-brooded.