Wildfire effects on hiking and biking demand in New Mexico: a travel cost study

We use a travel cost model to test the effects of wild and prescribed fire on visitation by hikers and mountain bikers in New Mexico. Our results indicate that net benefits for mountain bikers is $150 per trip and that they take an average of 6.2 trips per year. Hikers take 2.8 trips per year with individual net benefits per trip of $130. Both hikers' and mountain bikers' demand functions react adversely to prescribed burning. Net benefits for both groups fall as areas recover from prescribed burns. Because both visitation and annual recreation benefits decrease to these two types of visitors, this gives rise to multiple use costs associated with prescribed burning. With respect to wildfire, hikers and mountain bikers both exhibit decreased visitation as areas recover from wildfires, however, only hikers indicate an increase in per trip net benefits. Bikers' demand effectively drops to zero. These results differ from previous findings in the literature and have implications for efficient implementation of the National Fire Plan and whether prescribed burning is a cost effective tool for multiple use management of National Forests. Specifically, that fire and recreation managers cannot expect recreation users to react similarly to fire across recreation activities, or different geographic regions. What is cost effective in one region may not be so in another.     

Landform Classification for Land Use Planning in Developed Areas: An Example in Segovia Province (Central Spain)

Landform-based physiographic maps, also called land systems inventories, have been widely and successfully used in undeveloped/rural areas in several locations, such as Australia, the western United States, Canada, and the British ex-colonies. This paper presents a case study of their application in a developed semi-urban/suburban area (Segovia, Spain) for land use planning purposes. The paper focuses in the information transfer process, showing how land use decision-makers, such as governments, planners, town managers, etc., can use the information developed from these maps to assist them. The paper also addresses several issues important to the development and use of this information, such as the goals of modern physiography, the types of landform-based mapping products, the problem of data management in developed areas, and the distinctions among data, interpretations, and decisions.     

Alteration in rhizosphere soil properties of afforested Rhamnus lycioides seedlings in short-term response to mycorrhizal inoculation with Glomus intraradices and organic amendment

The reestablishment of autochthonous plant species is an essential strategy for recovering degraded areas under semiarid conditions. A field experiment was carried out to assess the short-term effect of two reafforestation methods involving mycorrhizal inoculation and compost addition on soil quality parameters and Rhamnus lycioides seedling growth. The nutrient content (NPK) and enzymatic activities (dehydrogenase, urease, protease-BAA, acid phosphatase and beta-glucosidase) increased and bulk density decreased in the rhizosphere soil with the organic amendment. Biomass C of rhizosphere soil increased by at least 240% with respect to the control soil after mycorrhizal inoculation and the combination of compost addition + mycorrhizal inoculation. Both mycorrhizal inoculation and composted organic residue addition increased R. lycioides seedling growth in the same proportion. In the short term, we conclude that the application of both reafforestation methods not only enhances the establishment of R. lycioides seedlings, but also improves soil quality.     

Cadmium accumulation and metallothionein synthesis in freshwater bivalves (Pyganodon grandis): relative influence of the metal exposure gradient versus limnological variability

The relative influence of limnological confounding factors on cadmium (Cd) bioaccumulation and metallothionein (MT) synthesis was quantified in natural populations of freshwater bivalves (Pyganodon grandis) living in lakes along a Cd concentration gradient. During the ice-free period, we measured 15 environmental variables in the water compartment and determined total concentrations of Cd and MT in the gills of bivalves at 37 littoral stations in 20 lakes distributed across the mining area of Rouyn-Noranda in northwestern Quebec. A multiple linear regression model including pH (+), dissolved Ca concentrations (-) and free Cd2+ concentrations at the sediment-water interface (+) explained 74% of the variability in Cd concentrations in the bivalve gills. Dissolved Ca (-) and free Cd2+ (+) together explained 62% of the variation in MT concentrations in the bivalve gills. Partial linear regression analyses indicated that the limnological factors' pure and shared effects together accounted for 48 and 45% of the total variation in Cd and MT concentrations in the gills, respectively. A lake selection procedure that could be applied in monitoring programs is proposed to minimise the relative influence of these confounding variables.     

Comparison of dioxin and furan TEQ determination in contaminated soil using chemical,micro-EROD,and immunoassay analysis

High resolution mass spectrometry gas chromatography (GC/MS) is the standard method for dioxin and furan analysis in environmental matrices. Considered as very accurate, this method is however time consuming and expensive. Methods based on biological interactions have the necessary sensitivity but began only recently to be investigated in the context of environmental applications. We have compared dioxin and furan toxicity levels (expressed as toxic equivalent quantities (TEQs)) in soil samples by three analytical approaches: the micro-ethoxyresorufin-o-deethylase (EROD) bioassay (a receptor-based method), an immunoassay (antibody-based method) and GC/MS analysis (used as a reference) using a shortened extraction-purification method. Both biological methods were sensitive to interferences from compounds co-extracted from samples. Most samples were underestimated by the immunoassay and, at a greater extent, overestimated by the EROD bioassay. The average accuracy of TEQ estimation (86 +/- 45% of values established by GC/MS) and the absence of false-negatives showed by the immunoassay suggest the usefulness of this method for semi-quantitative, preliminary characterization of potentially contaminated sites.     

Preferential bromide and pesticide movement to tile drains under different cropping practices

Subsurface drainage systems are useful tools to study chemical leaching in soils. Our objective was to compare the breakthrough behavior of bromide, atrazine (2-chloro-4-ethylamino-6-isopropylamino-s-triazine) and metolachlor [2-chloro-N-(2-ethyl-6-methylphenyl)-N-(2-methoxy-1-methylethyl) acetamid] to tile drains under two fall tillage practices (conventional tillage [CT] with a moldboard plow, and reduced tillage [RT] with a chisel plow) in field plots cultivated with corn (Zea mays L.). Leachate volume were greater in RT than in CT, with no statistical differences. Soil analysis showed that bromide migrated deeper in the soil profile than both herbicides, with little tillage effect. All chemicals were detected in drainage water at the same time and followed an event-driven behavior. Tillage had no effect on atrazine and metolachlor found in drainage water, while bromide concentration peaks were higher in RT than in CT in 1999. Concentration peaks were recorded earlier for atrazine and metolachlor than for bromide. Plots of cumulative relative chemical mass (cumulative mass divided by total mass measured in drainage) as a function of cumulative drainage were mostly linear for bromide, while they were S-shaped for both herbicides. Drainage that corresponded to 50% of relative cumulative mass ranged from 40 to 55% for bromide and from 5 to 28% for both herbicides. Rapid chemical movement to tile drains suggested that preferential flow was important in both CT and RT, and that these tillage practices had little influence on this phenomena.     

Assessment of spatial variation of cesium-137 in small catchments

Surface contamination by bomb-derived and Chernobyl-derived 137Cs has been subject to changes due to physical decay and lateral transport of contaminated soil particles, which have resulted in an on-going transfer of radionuclides from terrestrial ecosystems to surface water, river bed sediments, and flood plains. Knowledge of the different sources of spatial variation of 137Cs is particularly essential for estimating 137Cs transfer to fluvial systems and for successfully applying 137Cs as an environmental tracer in soil erosion studies. This study combined a straightforward sediment redistribution model and geostatistical interpolation of point samples of 137Cs activities in soil to distinguish the effects of sediment erosion and deposition from other sources of variation in 137Cs in the small Mochovce catchment in Slovakia. These other sources of variation could then be interpreted. Besides erosion and deposition processes, the initial pattern of 137Cs deposition, floodplain sedimentation, and short-range spatial variation were identified as the major sources of spatial variation of the 137Cs inventory.     

Effects of cadmium on sediment processing on members of the Capitella species-complex

The effect of cadmium on sediment processing by laboratory-cultured specimens of Capitella sp I and Capitella sp B was investigated. Specimens were exposed to 0, 60, 90 and 140 microg Cd g(-1) dry weight sediment for a 10 day period (two census days) to observe effects of cadmium on their feeding activity. Under unstressed conditions, Capitella sp I specimens were larger, had higher biomass and produced more fecal pellets than Capitella sp B. Cadmium concentrations had no effect on pellet production and body mass of the studied populations. However, cadmium exposure time significantly affected Capitella sp B pellet production and body mass of both populations following different trends: after 10 days of exposure, the average processed sediment per unit worm mass decreased in Capitella sp I but increased in Capitella sp B. The latter population did not reduce its feeding activity in the presence of cadmium maybe related to the fact that it is derived from a highly polluted environment. This study has shown an unimpaired response of Capitella sp I and Capitella sp B to cadmium in their sediment processing activity, which indicates the potential importance of this species complex in the trophic transfer of metals from sediments to other marine organisms.     

PM2.5 assessment in 21 European study centers of ECRHS II: Method and first winter results

The follow-up of a cohort of adults from 29 European centers of the former European Community Respiratory Health Survey (ECRHS) I (1989-1992) will examine the long-term effects of exposure to ambient air pollution on the incidence, course, and prognosis of respiratory diseases, in particular asthma and decline in lung function. The purpose of this article is to describe the methodology and the European-wide quality control program for the collection of particles with 50% cut-off size of 2.5 microm aerodynamic diameter (PM2.5) in the ECRHS II and to present the PM2.5 results from the winter period 2000-2001. Because PM2.5 is not routinely monitored in Europe, we measured PM2.5 mass concentrations in 21 participating centers to estimate background exposure in these cities. A standardized protocol was developed using identical equipment in each center (U.S. Environmental Protection Agency Well Impactor Ninety-Six [WINS] and PQ167 from BGI, Inc.). Filters were weighed in a single central laboratory. Sampling was conducted for 7 days per month for a year. Winter mean PM2.5 mass concentrations (November 2000-February 2001) varied substantially, with Iceland reporting the lowest value (5 microg/m3) and northern Italy the highest (69 microg/m3). A standardized procedure appropriate for PM2.5 exposure assessment in a multicenter study was developed. We expect ECRHS II to have sufficient variation in exposure to assess long-term effects of air pollution in this cohort. Any bias caused by variation in the characteristics of the chosen monitoring location (e.g., proximity to traffic sources) will be addressed in later analyses. Given the homogenous spatial distribution of PM2.5, however, concentrations measured near traffic are not expected to differ substantially from those measured at urban background sites.     

Immobilization of iodide on copper(I) sulfide minerals

In the goal of finding efficient scavengers for radioiodide in conditions (pH, pE) close to those encountered in deep geological sites, sorption of iodide ions on cuprous sulfide minerals (especially roxbyite, Cu(1.75)S) has been studied. Surface analysis by X-ray photoelectron spectroscopy has shown that commercial cuprous sulfides are covered by an oxidized overlayer (mainly in the form of CuSO(4)). Therefore, a synthetic procedure to get roxbyite (typically by mixing Na(2)S with an aqueous suspension of commercial Cu(2)O) was applied to produce pure samples with clean surfaces. Batch equilibration of cuprous sulfide particles suspended in aqueous solutions containing iodide species has revealed significant consumption of iodide. The sorption mechanism involves the formation of a surface complex via the exchange of surface hydroxyl groups by iodide anions, as highlighted by a transient pH increase during the immobilization process. Other copper and mixed copper-iron sulfides (e.g. CuS, CuFeS(2)), which are stable over wide pH and potential ranges are also likely to accumulate iodide species. Because of the specific interaction between iodide and copper(I) centers on the minerals, high distribution coefficients (>1000 ml/g) were observed.