Characteristics of a bioxalate chelating extraction process for removal of chromium,copper and arsenic from treated wood

The disposal of wood waste treated with chromated copper arsenate (CCA) is a problem in many countries. We have proposed a novel chelating extraction technique for CCA-treated wood using bioxalate, a solution of oxalic acid containing sufficient sodium hydroxide to adjust the pH to 3.2, which is an effective way to obtain an extraction efficiency of 90% for chromium, copper, and arsenic. The purpose of the present study was to investigate the characteristics of bioxalate extraction of CCA-treated wood. Extractions of CCA-treated western hemlock chips with solutions of bioxalate, oxalic acid, and sodium hydroxide were carried out. The use of bioxalate was confirmed as the most effective extraction technique for chromium, copper and arsenic, with an efficiency of 90%. Extraction with simple oxalic acid was ineffective for copper (less than 40% extraction efficiency), but effective for chromium and arsenic, with 90% efficiency. Sodium hydroxide showed a similar tendency, being ineffective for chromium and copper (less than 20% extraction efficiency), but relatively effective for arsenic (around 70–80% efficiency). We also discovered an interesting phenomenon whereby the addition of sodium hydroxide to a simple oxalic acid solution during the oxalic acid extraction progress resulted in dramatically increased extraction efficiency for copper, chromium and arsenic, up to 90%. Although oxalic acid was ineffective for copper extraction, the addition of sodium hydroxide during the oxalic acid extraction process rendered it effective.     

Steam gasification of epoxy circuit board in the presence of carbonates

To recover useful metals from end-of-life electronic devices and to convert plastic components from these devices into clean fuel gas, steam gasification of epoxy board samples was carried out at 600–700?°C and 0.1?MPa pressure in the presence of a ternary eutectic carbonate (lithium carbonate, sodium carbonate, and potassium carbonate). Hydrogen and carbon dioxide were the main products, and methane and carbon monoxide were detected as minor products. The gasification proceeded in two steps: an initial rapid pyrolysis followed by secondary steam gasification of char produced from the pyrolysis. The ternary eutectic carbonate accelerated not only the latter steam gasification but also the initial rapid pyrolysis. The activation energy for the steam gasification of epoxy board samples in the presence of the carbonate was 122?kJ/mol.     

Photodegradation of monochlorobenzene in titanium dioxide aqueous suspensions

The photocatalytic degradation of monochlorobenzene using titanium dioxide aqueous suspensions was performed under solar-simulated irradiation. The effects of concentration of monochlorobenzene, amount of titanium dioxide and pH of solution on the degradation were examined. The intermediates identified were three monochlorophenols, chlorohydroquinone and hydroxy-hydroquinone.     

Bioelectrochemical conversion of urea to nitrogen using aminated carbon electrode

Urea decomposes to ammonia and carbon dioxide via carbamic acid, and amine groups can be introduced to the glassy carbon electrode surface during the electrode oxidation of carbamic acid. This modified carbon electrode has excellent catalytic activity of the oxidation of carbamic acid, and can be used to electrooxidize urea by combining urease reaction and electrode oxidation. We found that nitrogen gas is finally produced by the carbamic acid produced from urea. The production of nitrogen was confirmed by gas chromatography-mass spectrometry, and fragment pattern of hydrazine was also detected in the electrolyzed solution of urea. We intend to describe new electrochemical conversion system of urea to harmless nitrogen gas. The electrode oxidation current of urea was decreased by addition of radical trapping agent such as DMPO (5,5-dimethyl-1-pyrroline N-oxide), and this fact suggests that carbamic acid radical couples to form nitrogen-nitrogen bond, and this dimer is oxidized to nitrogen. The electrode oxidation current of urea became larger when oxygen was removed. This fact indicates that the intermediate species (probably hydrazine) produced by the electrolysis is oxidized by not only electrode reaction but also oxygen.     

Prospects for a self-sustainable sewage treatment system: a case study on full-scale UASB system in India's Yamuna River Basin

The government of India decided to launch a project to implement 16 full-scale Upflow Anaerobic Sludge Blanket (UASB) reactors (with a total capacity of 598,000 m(3)/d) in the Yamuna River basin under its Yamuna Action Plan (YAP). A polishing pond called the Final Polishing Unit (FPU) was utilized for post-treatment. This paper evaluates the sewage treatment efficiency of the combined system of full-scale UASB reactors and polishing ponds under Indian climatic conditions. Results have shown that the effluent from the sewage treatment plants (STPs) investigated failed to comply with applicable discharge standards in terms of BOD, SS, and fecal coliform removal. Therefore, it is proposed that such proper operation and maintenance as removing excess sludge and scum be conducted in order to increase treatment efficiency. Moreover, trained and experienced workers are also required to operate and maintain the systems, along with a scientific approach.     

Development of the automated cleanup system for the analysis of PCDDs, PCDFs and DL-PCBs

A new automated cleanup system for the analysis of dioxins (PCDDs, PCDFs and DL-PCBs) has been developed. It was controlled by PLC through the touch-panel. This automated cleanup system can simultaneously treat six samples in 2h, using only about 30 mL of solvent. In this study, the recovery rates of the internal standard added as cleanup spiked were between 70% and 120% in the fly ash sample. The RSDs (relative standard deviations) were below 15%. The shortest analysis time from cleanup to calculation of concentration was approximately 6h. Moreover, this automated cleanup system eliminates personal error in sample preparation and training time for the analyst, and improves the accuracy of the experiment. Additionally, this automated cleanup system allowed rapid analysis and less consumption of organic solvent.     

Application of crosswell seismic tomography using difference analysis with data normalization to monitor CO2 flooding in an aquifer

A pilot-scale experiment for carbon dioxide (CO₂) sequestration was undertaken at the Nagaoka test field in Japan. Time-lapse crosswell seismic tomography was conducted to detect and monitor the movement of CO₂ injected into an aquifer. We applied difference analysis with data normalization (DADN) to the time-lapse data to eliminate false images that were apparent in a conventionally processed difference section. Conventional difference analysis calculates travel-time delays after inversion, whereas the DADN method calculates them from raw travel-time records before inversion. Thus, fewer errors are generated with the DADN method compared to a conventional inversion analysis. We applied the DADN method to time-lapse tomography data recorded before and after the injection of CO₂ and computed the velocity variation in a subsurface section, which clearly showed the distribution of CO₂ flooding within a high permeability zone in the aquifer and showed no CO₂ leakage into the caprock. Our results also show the maximum velocity decrease as a result of CO₂ injection was about 9%, which is close to the results obtained in laboratory experiments. Finally, numerical simulations were inverted to test the effectiveness of the conventional and DADN methods in dealing with noise. These tests showed that the DADN method effectively reduces unique coherent noise for particular receiver and source combinations. We concluded that the DADN method provides useful data for monitoring the flow of CO₂ sequestered in underground aquifers.     

Experimental induction of gonadal maturation and spawning in the giant jellyfish <Emphasis Type="Italic">Nemopilema nomurai</Emphasis> (Scyphozoa: Rhizostomeae)

We studied the processes of gonadal maturation, spawning, fertilization and embryonic development of the giant jellyfish Nemopilema nomurai, which has been blooming in recent years in the Sea of Japan. Healthy medusae actively swimming offshore had immature gonads, but damaged and ashore-drifted animals had relatively mature gonads. The animals maintained in a small net on the nearshore to mimic the drifted condition showed induced gonadal maturation by the increase in oocyte diameter and darkness in the matrix. A similar maturation process also occurred in isolated pieces of ovary incubated at the same temperature. Fully grown oocytes that probably stopped at the prophase of the first meiosis reinitiated maturation divisions in response to light exposure, and massive spawnings occurred 80–100 min after the exposure. The spawned oocytes were first released within the subgenital sinus, then transported peripherally and finally shed into the gastrovascular cavity. Maturation and spawning in male gonads were similar to those of females except that the male spawning occurred within 30 min after the light exposure and always preceded the female spawning. Hence, it was suggested that fertilization might take place in the female gastrovascular cavity by the sperm that came in from surrounding seawater by animals’ pumping activities after dawn. Having mechanical damages might promote fertilization success of this species in the Sea of Japan.     

Air and landfill gas movement through passive gas vents installed in closed landfills

In a closed landfill, Japan, remedial actions have been undertaken to address the inadequate leachate collection and drainage systems. Part of this process included installing many passive gas vents in the landfill to promote stabilization of landfilled waste. This study focused on the gas velocity in vents by conducting tracer tests to elucidate the gas flow via passive gas vents. The gas composition and gas temperature in the vents was also measured.As the gas vents pass through the waste layer, both landfill gas and air flows through the vents. Therefore, passive gas vents can be used to aerate landfilled waste as well as to collect and release landfill gas. Aerobic biodegradation occurs when air migrates through the waste layer if organic matter is present; this increases the temperature of the waste layer. Inflow of air into the gas vents can occur at a wide range of depths, even 10–20 m below ground level. Air is induced not from the surface of the landfill, but horizontally along the waste layer. The driving force of air induction from outside is a buoyancy effect caused by the temperature rise due to aerobic biodegradation.