Distribution of Juvenile,subadult and adult Scylla serrata (Crustacea: Portunidae) on tidal flats in Australia

In Deception Bay, northern Australia, during 1979–1981, a study was made of the distribution of Scylla serrata (Forskal) in an area having a broad intertidal zone. Juveniles (20 to 99 mm carapace width) were resident in the mangrove zone, remaining there during low tide. The majority of subadult crabs (100 to 149 mm) migrated into the intertidal zone to feed at high tide and retreated to subtidal waters at low tide. Adults (150 mm and larger) were caught mainly subtidally and only small numbers were captured in the intertidal at high tide. Few crabs were captured in the coolest months (May to August). Adults were captured on the flats mainly in the warmest months (January to April), but subadults could be captured over the entire summer (September to March). Juveniles were found in the upper intertidal throughout the year.     

Salinity and temperature tolerance of zoeae of the portunid crab Scylla serrata

The tolerances of the first zoeal stage of the crab Scylla serrata (Forskal) have been investigated in 64 different temperature-salinity combinations. Exposure to temperatures above 25°C or to salinities below 17.5 caused considerable mortality; therefore, zoeae are unsuited to estuarine conditions. The larvae can tolerate temperatures down to 5°C is they are inactive below 10°C. It is suggested that 10°C is probably a lower limit and that female crabs which migrate to sea to release their eggs do not enter water with a temperature below 12°C. Hydrological conditions along the south-east coast of Africa indicate that females would, therefore, migrate less than 10 km offshore.     

Feeding by the sand crab Portunus pelagicus on material discarded from prawn trawlers in Moreton Bay,Australia

A field and laboratory study in 1984–1985 using the foregut contents of crabs caught in Moreton Bay, Queensland, when trawling was underway, showed that animals discarded from trawls constituted about 33% of the diet. Portunus pelagicus can fill its foregut in about 8 min and clear it completely of tissues in about 6 h, except for fish bone which requires about 24 h. P. pelagicus used a zigzag search pattern to find food and moved towards it at a mean point-to-point speed of 290 m h^-1 (8 cm s^-1). Underwater still photography on the trawl grounds showed that P. pelagicus was the most common scavenger attracted to a bait that simulated trawl-discards, and that it was most active at dusk. Trawler-discards at periods of high food demand in summer may allow larger populations of P. pelagicus to exist than would otherwise occur.     

Mathematical model for the microbial metabolism of glucose induced enhanced biological phosphorus removal in an anaerobic/aerobic sequential batch reactor

Glucose plays a significant role in enhanced biological phosphorus removal (EBPR). Previous experimental studies have shown that in addition to acetate, glucose can induce and maintain a successful EBPR performance under certain operating procedures. Mathematical modeling of the EBPR metabolism is an important consideration that is necessary to produce a deeper insight into this process. In this study, four anaerobic reactions plus four aerobic reactions with fourteen kinetic constants are structured to describe the dynamic behavior of the key metabolic components in the glucose induced EBPR system. The development of the stoichiometric coefficients for the reactions is based on fundamental biochemical principles. The model describes the dynamics of the important storage compounds, which are considered separately from the active biomass. Sequential batch experiments were performed to find the optimum model parameters using sludges exhibiting stable EBPR from glucose fed system. The maximum specific substrate conversion rate in the glucose model is composed of two factors: the maximum specific rates of glucose direct conversion to PHV (q _gv ^max ) and glucose conversion to glycogen q _gl ^max , which are 14.1 and 699.7 C-mmol/C-mmol·h, respectively. The maximum specific rate of polyphosphate synthesis k _pp ^max is 0.2 P-mmol/C-mmol·h. The model with the best-fit parameters satisfactorily simulates the dynamic behavior of the key components during both anaerobic and aerobic conditions.     

Very low versus undetectable maternal serum alpha-fetoprotein values and fetal death

Very low maternal serum alpha-fetoprotein (MSAFP) levels (<10 ng/mL) are known to be associated with non-viable pregnancies, including conditions such as fetal death, molar pregnancies, and non-pregnancies. There has not been agreement, however, as to whether very low MSAFP levels indicate already existing fetal deaths or are actually predictive. We analysed 230 pregnancies with MSAFP levels <10 ng/mL from among 15 807 women (1.5 per cent) screened consecutively during a three-year period and identified 26 non-viable pregnancies, 22 of which were diagnosed sonographically as part of the screening process (17 missed abortions, 3 blighted ova, 2 non-pregnancies). Furthermore, 20 of these 22 pregnancies were associated with essentially undetectable MSAFP levels (<5 ng/mL). Our data indicate that pregnancies with MSAFP values <5 ng/mL are the group most strongly associated with fetal non-viability and that very low MSAFP values are not strongly predictive for fetal death.     

Effects of biofilm growth on flow and transport through a glass parallel plate fracture

The effects of biofilm growth on flow and solute transport through a sandblasted glass parallel plate fracture was investigated. The fracture was inoculated using soil microorganisms. Glucose, oxygen and other nutrients were supplied to support growth. The biomass initially formed discrete clusters attached to the glass surfaces, but over time formed a continuous biofilm. From dye tracer tests conducted during biofilm growth, it was observed that channels and low-permeability zones dominated transport. The hydraulic conductivity of the fracture showed a sigmoidal decrease with time. The hydraulic conductivity was reduced by a factor of 0.033, from 18 to 0.6 cm/s, corresponding to a 72% decrease in the hydraulic aperture, from 500 to 140 microm. In contrast, the mass balance aperture, determined from fluoride tracer tests, remained relatively constant, indicating that the impact of biomass growth on effective fracture porosity was much less than the effect on hydraulic conductivity. Analyses of pre-biofilm tracer tests revealed that both Taylor dispersion and macrodispersion were influencing transport. During biofilm growth, only macrodispersion was dominant. The macrodispersion coefficient alpha(macro) was found to increase logarithmically with hydraulic conductivity reduction.     

Three-fluid retention in porous media involving water, PCE and air

A classical way to obtain three-fluid retention curves in porous media from measured two-fluid retention curves is based on the Leverett concept, which states that the total volumetric liquid content in a water-wet porous medium, containing water, a nonaqueous-phase liquid (NAPL) and air, is a function of the capillary pressure across the interface between the continuous NAPL and air. This functional relationship results from the assumed condition that in a three-fluid porous medium, the intermediate wetting fluid spreads over the water-air interface. Application of Leverett's concept may not be valid, however, for nonspreading NAPLs like perchloroethylene (PCE). This paper discusses measurements of both PCE-air and water-PCE-air retention curves using a long vertical column in conjunction with a dual-energy gamma radiation system. The data indicate that the Leverett concept was applicable only until a critical PCE saturation had been reached.     

Laboratory evaluation of thermophilic-anaerobic digestion to produce Class A biosolids. 2. Inactivation of pathogens and indicator organisms in a continuous-flow reactor followed by batch treatment.

Thermophilic-anaerobic digestion in a single-stage, mixed, continuous-flow reactor is not approved in the United States as a process capable of producing Class A biosolids for land application. This study was designed to evaluate the inactivation of pathogens and indicator organisms in such a reactor followed by batch treatment in a smaller reactor. The combined process was evaluated at 53 degrees C with sludges from three different sources and at 51 and 55 degrees C with sludge from one of the sources. Feed sludge to the continuous-flow reactor was spiked with the pathogen surrogates Ascaris suum and vaccine-strain poliovirus. Feed and effluent were analyzed for these organisms and for indigenous Salmonella spp., fecal coliforms, Clostridium perfringens spores, and somatic and male-specific coliphages. No viable Ascaris eggs were observed in the effluent from the continuous reactor at 53 or 55 degrees C, with greater than 2-log removals across the digester in all cases. Approximately 2-log removal was observed at 51 degrees C, but all samples of effluent biosolids contained at least one viable Ascaris egg at 51 degrees C. No viable poliovirus was found in the digester effluent at any of the operating conditions, and viable Salmonella spp. were measured in the digester effluent in only one sample throughout the study. The ability of the continuous reactor to remove fecal coliforms to below the Class A monitoring limit depended on the concentration in the feed sludge. There was no significant removal of Clostridium perfringens across the continuous reactor under any condition, and there also was limited removal of somatic coliphages. The removal of male-specific coliphages across the continuous reactor appeared to be related to temperature. Overall, at least one of the Class A pathogen criteria or the fecal coliform limit was exceeded in at least one sample in the continuous-reactor effluent at each temperature. Over the range of temperatures evaluated, the maximum time required to meet the Class A criteria by batch treatment of the continuous-reactor effluent was 1 hour for Ascaris suum and Salmonella spp. and 2 hours for fecal coliforms.     

Ammonia emission, deposition and impact assessment at the field scale: a case study of sub-grid spatial variability

A local ammonia (NH3) inventory for a 5x5 km area in central England was developed, to investigate the variability of emissions, deposition and impacts of NH3 at a field scale, as well as to assess the validity of the UK 5-km grid inventory. Input data were available for the study area for 1993 and 1996 on a field by field basis, allowing NH3 emissions to be calculated for each individual field, separately for livestock grazing, livestock housing and manure storage, landspreading of manures and fertiliser N application to crops and grassland. An existing atmospheric transport model was modified and applied to model air concentrations and deposition of NH3 at a fine spatial resolution (50 m grid). From the mapped deposition estimates and land cover information, critical loads and exceedances were derived. to study the implications of local variability for regional NH3 impacts assessments. The results show that the most extreme local variability in NH3 emissions, deposition and impacts is linked to housing and storage losses. However, landspreading of manures and intensive cattle grazing are other important area sources, which vary substantially in the landscape. Overall, the range of predicted emissions from agricultural land within the study area is 0-2000 kg N ha(-1) year(-1) in 1993 and 0-8000 kg N ha(-1) year(-1) in 1996, respectively, with the peak at a poultry farm located in the study area. On average, the estimated field level NH3 emissions over the study area closely match the emission for the equivalent 5-km grid square in the national inventory for 1996. Deposition and expected impacts are highly spatially variable, with the edges of woodland and small "islands" of semi-natural vegetation in intensive agricultural areas being most at risk from enhanced deposition. Conversely the centres of larger nature reserves receive less deposition than average. As a consequence of this local variability it is concluded that national assessments at the 5 km grid level underestimate the occurrence of critical loads exceedances due to NH3 in agricultural landscapes.