Elemental composition of sediments in Lake Jinzai, Japan: Assessment of sources and pollution

Bottom sediments from Lake Jinzai in southwest Japan were analyzed to determine their chemical compositions and to assess the potential for ecological harm by comparison with sediment quality guidelines. The pollution status of lake sediments was evaluated by employing contamination factor (CF), pollution load index (PLI), and geoaccumulation index (I(geo)), focusing on a suite of elements in lakebed and core sediments. Elevated concentrations of As, Pb, Zn, Cu, TOC, N, and P were present in several layers of the upper core and other surface sediments. The elevated metal concentrations are likely related to the fine-grained nature of the sediments, reducing bottom conditions produced by abundant organic matter, and possibly minor non-point anthropogenic sources. Moreover, correlations between the concentrations of trace metals and organic carbon, nitrogen, phosphorus, and iron, suggest that these elements play a role in controlling abundances. Calculated CF, PLI, and I(geo) indicate that the sediments are strongly polluted with respect to As, moderately to strongly polluted with Zn, and moderately polluted with Pb and Cu. Metal concentrations exceed the New York State Department of Environmental Conservation (NYSDEC) lowest effect level and the Canadian Council of Ministers of the Environment (CCME) interim sediment quality guidelines that indicate moderate impact on aquatic organisms in the study area.     

Experimental verification for real-time environmental emergency response system: WSPEEDI by European tracer experiment

Japan Atomic Energy Research Institute has developed an emergency response system WSPEEDI to forecast long-range atmospheric dispersions of radionuclides discharged into the atmosphere. The latest version of WSPEEDI consists of an atmospheric dynamic model MM5 for calculating meteorological fields and a particle random-walk model for atmospheric dispersion. The performance of WSPEEDI was evaluated by data obtained from a field tracer experiment over Europe (ETEX) in this paper. The model validation was done with respect to the following points: (1) the dependence of model accuracy on the temporal and spatial resolutions of the meteorological fields and (2) the superiority of an atmospheric dynamic model over a mass-consistent wind model. Regarding (1), it was shown that the calculation accuracy of the new version with high temporal resolution was improved, especially at the edge of the plume. Moreover, although the increase in horizontal spatial resolution of the old version had no substantial effect on the model performance, increase in horizontal resolution of the new version contributed to the significant improvement of the calculation accuracy. These results showed that the dynamically calculated meteorological field with the spatial resolution of the meso-β–γ scale greatly improved calculation accuracy.     

Optimal environmental policy for waste disposal and recycling when firms are not compliant

We investigate a model that considers disposal and recycling activities after the consumption of products. In the field, the deposit–refund (D–R) policy has been considered as an ideal policy for internalizing disposal costs, which can result in the realization of the first-best policy. However, the possibility of firms' illegal disposal has been neglected. We introduce a monitoring cost to prevent firms from disposing of collected residuals illegally and induce the second-best D–R policy. We find that the relation between the monitoring problem for firms and the price of the recycling market brings about a variation in the optimal level of the refunds (which is typically smaller than the first-best level). Further, we investigate an alternative policy that requires producers to take-back residuals and show how this policy works equivalently to the second-best D–R policy by applying the theory of the tradable rights market.     

How seasonality affects the flow of estrogens and their conjugates in one of Japan's most populous catchments

A detailed study of the free and conjugated estrogen load discharged by the eight major sewage treatment plants into the Yodo River basin, Japan was carried out. Sampling campaigns were focused on the winter and autumn seasons from 2005 to 2008 and the free estrogens estrone(E1), 17β-estradiol(E2), estriol(E3), 17α-ethynylestradiol(EE2) as well as their conjugated (sulfate and glucuronide) forms. For both sewage effluent and river water E2 and E1 concentrations were greatest during the winter period (December-March). This coincides with the period of lowest rainfall and lowest temperatures in Japan. E1 was the dominant estrogenic component in effluent (means of 10-50 ng/L) followed by E2 (means of 0.5-3 ng/L). The estrogen sulfate conjugates were found intermittently in the 0.5-1.7 ng/L concentration range in the sewage effluents. The greatest estrogen exposure was found to be in the Katsura River tributary which exceeded 1 ng/L E2-equivalents during the winter period.     

Hardening performance of reclaimed gypsums for stabilizing agent to improve soft clayey ground

For a prospective solution of effective recycling of gypsum board wastes, the present study was conducted to evaluate applicability of reclaimed gypsum as stabilizing agent for improvement of soft clayey ground. A series of unconfined compression tests and needle penetration tests were conducted to understand the fundamental properties of reclaimed gypsum and gypsum treated soils and the durability in water. An important finding was strength decrease in relation to mixing time of gypsum and soil. This may attribute to excessive mixing that caused breakage of the promptly hardened gypsum treated clay. In addition, from sounding and laboratory tests on the stabilized ground by shallow mixing method with different execution conditions, it was found that the strength of stabilized ground appeared in an early stage and that the hardening effect of cement that was used in combination with gypsum continued in a longer period. Regarding an environmental aspect, a specific amount of cement could have restrained leaching fluorine satisfactorily under the standard level in the field by adopting suitable mixing proportions based on the laboratory mixing test results. For practical application, the mixing procedure was a major factor of strength growth when hemihydrate gypsum was used to stabilize soft clayey ground.     

Evaluation of non-methane hydrocarbon (NMHC) emissions based on an ambient air measurement in Tokyo area,Japan

Non-methane hydrocarbons (NMHCs) are known to have an important role on air quality due to their high reactivity. NMHC analysis has been performed on 148 ambient air samples collected at five different sites in the Kanto area (Tokyo metropolitan area and surrounding six prefectures) of Japan in summer and winter of 2008, and fifty NMHCs have been determined and quantified. A field measurement campaign has been conducted at one of the busiest intersections in Tokyo metropolitan area in winter of 2008. NMHC emissions are evaluated through comparison of distributions of individual NMHCs emitted from motor vehicles, which are estimated from the measurements, with those determined from the current emissions inventory. The comparison revealed that the measured distributions of acetylene, ethylene and toluene showed a good agreement with those estimated from the emissions inventory (the values estimated from the measurements are a factor of 1.5, 0.56 and 2.3 larger than the emissions inventory in median, respectively), however, propane and isobutane are found to be significantly underestimated in the emissions inventory (the measured values were a factor of 18 and 5.1 larger than the emissions inventory, respectively). The significant underestimate of propane can be explained by that the current emissions inventory does not consider emissions from liquefied propane gas (LPG) fueled vehicles. However, for isobutane, reasons for the underestimate are still unclear. Another field measurement has been conducted in summer of 2008, where the air samples have been collected at three different sites on the ground and by a helicopter as well. Remarkable high concentrations of 1-butene and cis- and trans-2-butenes have been sporadically observed in the samples collected at Urayasu in the coastal area of Tokyo bay. Calculated propylene equivalent (PE) concentrations of butenes revealed that those have a significantly important role in ozone formation when the air plume is affected by emissions from their emission sources. The PE concentrations of butenes varied from 0.1 to 39 ppbC, and accounted for 1.5–75% of total PE concentrations at Urayasu. Most of the continuous air quality monitoring stations does not record concentrations of individual hydrocarbons, therefore, the importance of reactive and low concentration hydrocarbon such as butenes might be overlooked in the current emissions inventory and/or air quality model. In this paper, the reliability of NMHC emissions is evaluated based on the field measurements. Their possible impacts on air quality in the Kanto area are discussed as well, based on the calculated propylene equivalent concentrations.     

Complete mineralization of benzene by a methanogenic enrichment culture and effect of putative metabolites on the degradation

Microbial degradation of benzene under anaerobic conditions plays an important role in remediation of contaminated sites but the microorganisms and metabolic pathways involved remain poorly understood. In this study, we evaluated degradation of benzene by a methanogenic enrichment culture obtained from non-contaminated lotus field soil, alone and in the presence of several putative metabolic intermediates, that is, toluene, benzoate and phenol. Using stable isotope (¹³C) labeled substrate, benzene was shown to be degraded almost completely to equimolar concentrations of methane and carbon dioxide, without detectable accumulation of extracellular metabolites. Concurrently, toluene, benzoate and phenol were also effectively mineralized, but probably by microorganisms other than the benzene degraders. The latter included Hasda-A, which is putative benzene-degrading deltaproteobacterium present in the culture. While toluene and benzoate did not affect benzene degradation, phenol had a moderate inhibitory effect although it was not a major metabolic intermediate of benzene in our culture. Finally, 4-hydroxycoumarin was detected as a compound formed from phenol but further experiments are required to elucidate its relationship to degradation of phenol.     

Identification of particles containing chromium and lead in road dust and soakaway sediment by electron probe microanalyser

Individual particles containing Cr and/or Pb and other major components were identified in road dust from a heavily used road (hereinafter 'heavy traffic road dust'), road dust from a residential area and soakaway sediment by electron probe microanalyser to locate their sources and carrier particles. Individual particles containing high levels of Cr and/or Pb (>or=0.2%) were identified using wavelength dispersive spectrometry (WDS) map analysis. Chromium, Pb and other major elements were then determined by means of a combination of WDS and energy-dispersive spectrometry in all identified particles, 50 particles containing neither Cr nor Pb from each type of road dust and soakaway sediment, and yellow road line markings. WDS map analysis revealed that many particles containing both Cr and Pb were present among the identified particles in heavy traffic road dust, whereas they were minor components in road dust from the residential area and soakaway sediment. The plots of X-ray intensities of Cr vs. Pb were linear for the identified particles containing both Cr and Pb in heavy traffic road dust, and the line closely fitted the plots for the three yellow road line marking samples. Individual particles were then classified using cluster analysis of element components. The results revealed that the adsorption of source materials or released metals onto soil minerals occurred in road dust and soakaway sediment, that the yellow road line markings were sources of Cr and Pb in heavy traffic road dust, and that materials containing Fe as a major component, such as stainless steel, were additional sources of Cr in both road dust and soakaway sediment.     

Relation of dietary inorganic arsenic exposure and urinary inorganic arsenic metabolites excretion in Japanese subjects

Inorganic arsenic (InAs) is a ubiquitous metalloid that has been shown to exert multiple adverse health outcomes. Urinary InAs and its metabolite concentration has been used as a biomarker of arsenic (As) exposure in some epidemiological studies, however, quantitative relationship between daily InAs exposure and urinary InAs metabolites concentration has not been well characterized. We collected a set of 24-h duplicated diet and spot urine sample of the next morning of diet sampling from 20 male and 19 female subjects in Japan from August 2011 to October 2012. Concentrations of As species in duplicated diet and urine samples were determined by using liquid chromatography-ICP mass spectrometry with a hydride generation system. Sum of the concentrations of urinary InAs and methylarsonic acid (MMA) was used as a measure of InAs exposure. Daily dietary InAs exposure was estimated to be 0.087 µg kg^?1 day^?1 (Geometric mean, GM), and GM of urinary InAs+MMA concentrations was 3.5 ng mL^?1. Analysis of covariance did not find gender-difference in regression coefficients as significant (P > 0.05). Regression equation Log ₁₀ [urinary InAs+MMA concentration] = 0.570× Log ₁₀ [dietary InAs exposure level per body weight] + 1.15 was obtained for whole data set. This equation would be valuable in converting urinary InAs concentration to daily InAs exposure, which will be important information in risk assessment.