Genetic structure and gene flow of eelgrass <Emphasis Type="Italic">Zostera marina</Emphasis> populations in Tokyo Bay,Japan: implications for their restoration

Massive losses of eelgrass Zostera marina beds in Japan have occurred over the past 100 years. Toward their restoration, transplantation of eelgrass has been attempted in some areas, including Tokyo Bay. This study examined population genetic structures and gene flow in eelgrass in Tokyo Bay to establish guidelines for conducting restoration. Genotypes of a total of 360 individuals from 12 beds were determined using five microsatellite markers. The eelgrass beds in inner bay had above-average genetic diversity. A neighbor-joining tree based on F _ST values among beds revealed that a strong gene flow had occurred among six beds in the inner bay. Genetic assignment testing of drifting shoots indicated that those with seeds migrate in both directions between the inner and outer bay. We suggested that the restoration of eelgrass in the innermost part of Tokyo Bay, where natural habitats have been lost, should be conducted using the inner bay beds.     

Measurements of short-lived cosmic-ray-produced radionuclides in rainwater

Cosmic-ray-produced (CP) nuclides with half-lives shorter than 21h were measured in rainwater by ultra-low-background gamma spectrometry at Ogoya Underground Laboratory. As levels of CP nuclides are extremely low and their half-lives are very short, quick sampling methods for a large volume of rainwater and rapid chemical separations by ion exchange method were developed. The nuclides measured were short-lived (24)Na, (28)Mg, (38)S, (38)Cl, (39)Cl, as well as nuclides with longer half-lives (7)Be and (22)Na. The number of atoms of CP nuclides in rainwater were evaluated to range from 30 to 1500L(-1) for (24)Na (n=16, mean; 520 [6.7mBqL(-1)]), 80 to 600L(-1) for (28)Mg (n=13, mean; 260 [2.4mBqL(-1)]), 400 to 1900L(-1) for (39)Cl (n=6, mean; 1200 [250mBqL(-1)]), 1x10(6) to 4x10(7)L(-1) for (7)Be (n=16, mean; 7x10(6) [1.05BqL(-1)]) and 2x10(3) to 1x10(5)L(-1) for (22)Na (n=9, mean; 2x10(4) [0.2mBqL(-1)]).     

Economic evaluation of optional recycling processes for waste electronic home appliances

This paper presents an economic evaluation of three typical recycling processes for the five main types of waste electronic home appliances (EHA) (TV set, refrigerator, washing machine, air conditioner and personal computer) in Beijing, the capital of China. The main purpose is to identify the formal management framework with economic feasibility for the waste EHA generated in large municipalities of China. It is found that the advanced technologies, which have mechanical processing units, should be introduced to recover more valuable materials from the waste appliances. Net revenues with a range of 90–240 RMB (Chinese currency unit, 1.0 USD ≈ 8.0 RMB) per unit, depend on the type of appliance, could be expected in case of using the most complicated procedures which can separate both metals and plastics from the shredded mixtures. However, the recycling of waste refrigerator and waste washing machine will, respectively, spend about 100 and 6 RMB per unit if solely by simple manual dismantling. Revenues from recycling of the other three types of appliances are positive but quite low in this case. Although positive revenues could be achieved from the isolated evaluation of recycling, the entire management system, which also covers the phases of collection and transportation, is economically infeasible if the waste appliances are bought from the households still at current prices. Based on a survey of the householder's attitude to the cost for waste EHA management, which was conducted earlier, the practical way to construct a formal management system for waste EHA in Beijing is to reduce the citizen's traditional expectation to the values of waste appliances and encourage their transfer to the formal collection system at lower prices.     

Numerical investigation for pressure mitigation effects of dike on blast wave

The three-dimensional and two-dimensional axisymmetric fluid dynamics simulations were carried out to clarify the blast pressure mitigating effects of dike’s configuration in hemispherical explosion. The simulated peak overpressure on the ground under the hemispherical explosion was compared with the empirical formula by Kingery, and the simulated data were validated. In the analysis, the simplification techniques for the numerical simulation were employed under the following two assumptions. The pressure distribution behind the wide dike was estimated using the axisymmetric flowfield, and the back step model was applied under the small condition for θ, the angle formed by the ground and the line between the explosion core and the dike front corner. From the simulated results, it is clarified that the large θ provided the great reduction of the blast wave pressure at faraway position. In the small θ condition, the conditions of the dike end position and the dike height were significant parameters determining the magnitude of pressure reduction and mitigated area. The pressure reduction at the dike end and mitigated area were predicted numerically, and related to the dike conditions.     

Gasification and smelting system using oxygen blowing for plastic waste including polyvinyl chloride

A new type of waste gasification and smelting system using oxygen blowing based on high-temperature metallurgy, was developed by Sumitomo Metals, Japan. This system can steadily gasify and melt not only municipal waste, but also plastic waste and polyvinyl chloride (PVC) waste by using a top-blow oxygen lance together with sideways-blow oxygen lances. As a result of gasification in the high-temperature reducing atmosphere and rapid gas cooling, dioxin-free, high-calorie purified gas was produced. Ash components in the wastes were smelted in a high-temperature reducing atmosphere, and high-quality slag free of heavy metals was produced. Most of the chlorine in the wastes was converted into hydrogen chloride in the off gas. The hydrogen chloride can be recovered as hydrochloric acid or chlorine, which are recyclable to PVC manufacturing.     

Evaluation of solubilizing ability of humic aggregate basing on the phase-separation model

Solubilizing abilities of aggregates of humic acid (HA) to chlorinated benzenes (CBs) were investigated by means of the apparent water solubility enhancement. Both the water solubilities of 1,4-dichlorobenzene (DCB) and 1,2,4,5-tetrachlorobenzene (TeCB) linearly increased with increasing concentration of HA above the critical micelle concentration (CMC). Such solubilization behavior of CBs for HA was compatible with those for sodium dodecyl sulfate (SDS). These results indicate that the solubilization of CBs in the aqueous solution of HA above the CMC can be interpreted on the basis of the phase-separation model. Thus, the partition coefficients (K(mic)) of CBs between water and HA aggregate phases were calculated by assuming this model. The fact that the K(mic) value increased with increasing K(ow) of CBs supported the partition into the HA aggregate phase by hydrophobic interaction. The estimated K(mic) values of DCB were not dependent on the solution pH. Both K(mic) values of DCB and TeCB for the HA aggregate were found to be 4-5-fold lower than those of SDS.