Study of Hg and SO3 behavior in flue gas of oxy-fuel combustion system

Oxy-fuel combustion systems have been under development to reduce CO₂ emissions from coal-fired power plants. In oxy-fuel combustion system, Hg in the flue gas causes corrosion in CO₂ purification and compression units. Also, SO₃ in the flue gas corrodes the equipment and ducts of oxy-fuel combustion system. Therefore, Hg and SO₃ need to be removed.Babcock-Hitachi conducted tests using a 1.5 MWth Combustion & Air Quality Control System (AQCS) test facility which consists of oxygen supply unit, furnace, Selective Catalytic Reduction (SCR) catalyst, Clean Energy Recuperator (CER), Dry Electrostatic Precipitator (DESP), flue gas recirculation system, Wet Flue Gas Desulfurization (WFGD), and CO₂ Compression and Purification Unit (CPU). In both cases of air and oxy-fuel combustion, the Hg removal across the DESP could be improved, and SO₃ concentration at the DESP outlet could be reduced to less than 1 ppm by installing a CER upstream of the DESP and reducing the gas temperature at the DESP inlet. Hg was not dissolved in the drain recovered from CO₂ compressor, and may be adsorbed at an inner part of CO₂ compressor. This indicated that Hg needs to be removed at a location upstream of the CO₂ compressor to prevent corrosion of the compressor.     

Degradation of Polyethylene and Nylon-66 by the Laccase-Mediator System

We investigated whether the laccase-mediator system (LMS) with 1-hydroxybenzotriazole (HBT) as a mediator could degrade high-molecular-weight polyethylene and nylon-66 membranes. The LMS markedly reduced the elongation and tensile strength of these membranes. After 3 days of treatment with the LMS, the M _w of polyethylene decreased from 242,000 to 28,300, and that of nylon-66 from 79,300 to 14,700. The LMS also decreased the polydispersity (M _w/M _n) of polyethylene and nylon-66. Furthermore, these reductions in elongation, tensile strength, and molecular weight were accompanied by morphological disintegration of the polyethylene and nylon-66 membranes. These results strongly suggest that the LMS with HBT can effectively degrade polyethylene and nylon-66.     

Diffusion test of 20 kinds of waste molten slags and competitive materials

“Waste molten slag” is a glass-like material produced by the vitrification of solid waste or solid waste incineration residue. When using slags of this kind in a natural environment, their impact is anticipated to be at the same level as competitive or substituted materials. In this study, we made comparative evaluations between waste molten slags and competitive materials, using 20 samples in total. It was proved that release fluxes of metals from molten slags of municipal solid waste were almost at the same level as competitive or substituted materials. However, a larger impact will be caused from some types of slag that contain harmful metals in high concentrations, such as the slag from shredded automobile residues. The results of release flux showed that nearly 80% of the slope of the flux did not fit with the diffusion range. However, the linearity of every flux was extremely high, regardless of the slope.     

Characteristics of environmental factors and their effects on CH4 and CO2 emissions from a closed landfill: An ecological case study of Shanghai

To elucidate the influence of landfill gas (LFG) emission on environmental factors, an ecological investigation that was primarily concerned with the characteristics of vegetation, cover soil, and solid waste in the landfill was carried out. Temporal and spatial variations in vegetation diversity and coverage and their effects on reducing the emission of methane in the landfill were investigated. The results showed that both vegetation coverage and diversity increased with elapsed landfill closure time. The transition trend of the vegetation species was from perennial plant (Phragmites australis) to annual plants. Perennial vegetation was the dominant type of vegetation during the early closure period, and annual vegetation coverage increased with closure time. Vegetation preferentially appeared in areas of comparatively high depth of cover soil, which was characterized by high moisture retentiveness that enabled vegetation growth. The concentrations of methane and carbon dioxide in the cover soil significantly decreased with increasing closure time. The concentrations of methane and carbon dioxide from bare cover soil were higher than those from vegetated cover soil whereas the CO₂ flux of bare cover soil was less than that of vegetated cover soil.     

A hierarchical analysis of terrestrial ecosystem model Biome-BGC: Equilibrium analysis and model calibration

The increasing complexity of ecosystem models represents a major difficulty in tuning model parameters and analyzing simulated results. To address this problem, this study develops a hierarchical scheme that simplifies the Biome-BGC model into three functionally cascaded tiers and analyzes them sequentially. The first-tier model focuses on leaf-level ecophysiological processes; it simulates evapotranspiration and photosynthesis with prescribed leaf area index (LAI). The restriction on LAI is then lifted in the following two model tiers, which analyze how carbon and nitrogen is cycled at the whole-plant level (the second tier) and in all litter/soil pools (the third tier) to dynamically support the prescribed canopy. In particular, this study analyzes the steady state of these two model tiers by a set of equilibrium equations that are derived from Biome-BGC algorithms and are based on the principle of mass balance. Instead of spinning-up the model for thousands of climate years, these equations are able to estimate carbon/nitrogen stocks and fluxes of the target (steady-state) ecosystem directly from the results obtained by the first-tier model. The model hierarchy is examined with model experiments at four AmeriFlux sites. The results indicate that the proposed scheme can effectively calibrate Biome-BGC to simulate observed fluxes of evapotranspiration and photosynthesis; and the carbon/nitrogen stocks estimated by the equilibrium analysis approach are highly consistent with the results of model simulations. Therefore, the scheme developed in this study may serve as a practical guide to calibrate/analyze Biome-BGC; it also provides an efficient way to solve the problem of model spin-up, especially for applications over large regions. The same methodology may help analyze other similar ecosystem models as well.     

Uptake and distribution of 90Sr and stable Sr in rice plants

The stable Sr content in the aboveground parts of rice plants at various growth stages, and the distributions of 90Sr and stable Sr in rice plant components, such as polished rice, rice bran, hull, straw and root, at harvest time, were determined. The total Sr content in the aboveground rice plants was dependent on the growth stage and followed the sigmoidal shape of the growth curve. The concentration of 90Sr among the different components of rice plants varied within two orders of magnitude, whereas the 90Sr/Sr concentration ratio had a constant value. Therefore, the translocation rate of 90Sr in rice plants had similar values to that of stable Sr. However, the 90Sr/Sr concentration ratio for the rice plants was different for each study site. Only 0.6% of the total Sr was found in polished rice, while more than 99% was found in the non-edible components, of which 87% was present in the straw. These findings suggest that 90Sr in the non-edible parts could have been transferred to humans through the soil-plant system and/or feed-livestock pathway. The soil-to-plant transfer factor of 90Sr in polished rice was 0.0021 +/- 0.00007, which was two orders of magnitude lower than that in the straw. The percentage of 90Sr removed from the upper soil layer to the aboveground biomass of rice plants at harvest time was calculated as 0.094%. It is possible that approximately 0.1% of the total 90Sr content in the surface soil layer is removed from the soil-plant system by human activities every year.     

Effect of 17beta-estradiol on the reproduction of Japanese medaka (Oryzias latipes)

Estrogenic compounds such as 17beta-estradiol (E2) and its analogs are present in the aquatic environment and can adversely affect the reproductive systems of aquatic organisms. Although E2 has been detected at a maximum concentration of 64 ng/l in effluents of sewage treatment works (STWs), few reports address the associated effects on reproduction in fish. Therefore, we exposed adult medaka (Oryzias latipes) to mean measured E2 concentrations of 29.3, 55.7, 116, 227, and 463 ng/l for 21 d and assessed the effects on the egg number and fertility of paired medaka during the exposure period. In addition, we determined the hepatic vitellogenin (Vtg) concentration and histologically assessed the gonads of these fish. The number of egg produced and fertility of the paired medaka exposed to 463 ng/l E2 were significantly less compared with those of the control fish. Males in all treatment groups had developed testis-ova. Males treated with E2 concentrations = 55.7 ng/l contained relating great concentrations of hepatic Vtg. Therefore, although only the greatest E2 concentration tested in our study affected fecundity and fertility, effects of E2 were observed on induction of Vtg and testis-ova in male medaka exposed to environmentally relevant concentrations of E2.     

Concentration and specific activity of fallout 137Cs in extracted and particle-size fractions of cultivated soils

Fallout (137)Cs and stable Cs in soils were separated with two extractants (1M CH(3)COONH(4) solution and 0.8M CH(3)COONH(4) in 5% HNO(3) solution after H(2)O(2) oxidization). The residue remaining after removal of the oxidizable organic-bound fraction was separated into the particle-size fractions including clay, silt, fine sand and coarse sand with a sieving and sedimentation method. Then, the concentrations of (137)Cs and stable Cs in the extracted fractions and the particle-size fractions were determined. The (137)Cs contents in the exchangeable and organic-bound fractions in the soil were approximately 10 and 20%, respectively. The (137)Cs content in the strongly bound fraction was about 70%, and the concentration of (137)Cs in the clay was the richest among the particle-size fractions. The specific activity of (137)Cs (concentration ratio of fallout (137)Cs/stable Cs) decreased in the order exchangeable, organic-bound and strongly bound fractions. The data suggest that equilibrium between (137)Cs and stable Cs was not reached among those fractions, even though most of the (137)Cs that had been deposited on the soil was derived from fallout weapons tests that occurred several decades ago. The concentration of (137)Cs among the particle-size fractions in each soil was different, whereas the specific activity of (137)Cs in the particle-size fractions had a relatively similar value.     

Detailed PCB congener patterns in incinerator flue gas and commercial PCB formulations (Kanechlor)

In this study, we determined the detailed PCB congener patterns in flue gases from eight incinerators and four commercial PCB formulations (Kanechlors). About 160 PCB peaks were identified in samples using a DB-5 column and HRGC/HRMS. The concentration of incinerator stack emission gas ranged from 0.02 to 44 ngWHO-TEQ/Nm3. The ratios of dioxin-like PCBs in the total PCB concentration were from 3.4% to 25.7% and from 0.63% to 9.1% in stack emission gases and Kanechlor samples, respectively. The PCB congener profiles of Kanechlor samples were similar to those of previous studies. To determine characteristic congeners in flue gas and Kanechlor samples, principal component analysis (PCA) of the data was conducted using STATISTICA for Windows 5.0J (StatSoft, Inc.). As a result, we obtained four principal components (PCs) and accounted for 74% of the total variance. PC 1 was interpreted combustion, PC 2 and PC 3 were interpreted the difference in the number of substituted chlorines and, PC 4 could not be determined. Moreover, we obtained three groups according to the PCB congeners pattern among samples by PCA. These specific congeners that represent characteristics of each class were identified. These data will be useful for the source analysis of PCBs in the environment.