Mechanical properties of incineration bottom ash: The influence of composite species

The mechanical properties, including strength, deformational behavior, and wetting softening phenomena of municipal solid waste incinerator (MSWI) bottom ash are one of the major concerns for reuse applications. However, owing to the complex constituents of municipal solid waste, the properties of MSWI bottom ash are often highly variable. A series of artificial specimens with controlled chemical components were tested in this study. The test results show that the artificial bottom ash possesses the following mechanical characteristics: (1) for the strength, the frictional angles of the bottom ash under dry and saturated conditions vary from 34.8° to 51.1° and 26.0° to 37.2°, respectively; (2) for the deformation, the shear stiffness increases with the normal stress arises and degrades upon increased shearing; (3) significant wetting degradation of the strength and stiffness were observed.The multi-variable regression analysis was conducted to evaluate the associated influence of the chemical components on the strength. Among the evaluated components, Fe₂O₃ and Al₂O₃ are key factors; an increase in either results in higher strength at both dry and saturated conditions. The results were used to propose empirical relationships for ?_dry and ?_sat, expressed in terms of Fe₂O₃ and Al₂O₃. Accordingly, a strength classification chart is proposed for engineering purposes.     

Safety assessment for accident of cooling loop failure (ACLF) in lunar nuclear power reactor (LNPR)

The safety assessment of an accident in the lunar base power plant is investigated for the stability of the operation. The lunar surface reactor is modeled for this study. The accident of cooling loop failure (ACLF) is one of the important scenarios for the virtual case in the moon nuclear power plant (NPP). The newly designed lunar nuclear power reactor (LNPR) is suggested for the commercial purpose. The system dynamics (SD) is used for the simulation of the safety assessment. The cyclic variation of the lunar surface temperature can affect to the physical situation of the coolant, which is expressed by the time step. The result shows the performance possibility of the long term cooling increases slightly in the short period of the time step. The dynamical simulation of the lunar environment is performed for the conceptual design of the NPP.     

Vertical distribution and characteristics of soil humic substances affecting radionuclide distribution

The humic substances extracted from different soil depths are separated into humic (HA) and fulvic (FA) acids, and characterized for their chemical composition, proton exchange capacity, spectroscopic characteristics and binding properties to the europium ion. The chemical and spectroscopic results show that FA compared to HA has a relatively high O/C ratio, high acidic functional group contents and low aromatic contents. The synchronous fluorescence spectroscopic results show that the stability constant (K) of the soil humic substances with Eu(III) ion tends to increase as the soil depth becomes deeper, and HA has a slightly stronger binding ability than FA. The measured total site concentrations (C(L)) reveal that Eu(III) ion is loaded onto HA by 62-77% of the total acid sites, but FA is only approximately 50% covered by Eu(III) ion. Information could be useful in understanding the migration of radionuclides in soil layer.     

Effect of complex nitrogen source on the synthesis and accumulation of poly(3-hydroxybutyric acid) by recombinantEscherichia coli in flask and fed-batch cultures

When a recombinantEscherichia coli XL1-Blue harboring pSYL105 was cultured in a complex medium, a poly(3-hydroxybutyric acid) (PHB) concentration of 7.16 g/L was obtained in 48 h. However, a PHB concentration of only 0.91 g/L was obtained in 60 h by culturing in a defined medium. Also, fed-batch culture in a defined medium resulted in considerably lower PHB accumulation than in a complex medium. With the aim to produce a high concentration of PHB at a reduced medium cost, we examined 10 complex nitrogen sources for their ability to promote PHB synthesis in a defined medium. Tryptone, casamino acids, and casein hydrolysate promoted PHB synthesis to a higher extent than the others tested. PHB synthesis was also enhanced during fedbatch cultures when a defined medium was supplemented with various complex nitrogen sources. With tryptone supplementation a PHB concentration of 66.7 g/L could be obtained in 44 h. Yeast extract was less effective for promoting PHB synthesis than tryptone. Corn steep liquor, which did not enhance PHB synthesis significantly, could promote PHB synthesis considerably when supplemented together with yeast extract in both flask and fed-batch cultures.     

Temperature Effects on Soil Mineralization of Polylactic Acid Plastic in Laboratory Respirometers

A respirometric system was used to analyze the biodegradation of high molecular weight (120,000 to 200,000 g mol^–1) polylactic acid (PLA) plastic films in soil under laboratory conditions. The respirometric system consisted of air-conditioning pretraps, a soil reactor, and a carbon dioxide (CO₂) posttrap. A 200-g homogeneous soil mixture of all-purpose potting soil : manure soil : sand [1 : 1 : 1 (w/w)] and 1.5 g of PLA plastic films in 1 × 1-cm² squares was added to each bottle. The respirometers were placed in a 28, 40, or 55°C water bath for 182 days. Treatments (three replicates) included native corn starch (positive control), polyethylene (Glad Cling Wrap; negative control), and three PLA films: Ca-I (Cargill Dow Polymers LLC, monolayer), GII (Cargill Dow Polymers LLC, Generation II), and Ch-I (Chronopol; monolayer). The degree of polymer mineralization was indicated by the cumulative CO₂ liberated from each respirometer. The initial average mineralization rate and total percentage mineralized of the PLA plastic films at 28, 40, and 55°C was 24.3, 41.5, and 76.9 mg/day with a 27, 45, and 70% carbon loss, respectively. No decrease in soil pH was observed after 182 days of mineralization. Hence, increase in soil temperature drastically enhanced the biodegradation of PLA plastic films in soil under laboratory conditions (P < 0.0001).     

A laboratory scale study on arsenic（Ⅴ） removal from aqueous medium using calcined bauxite ore

The present work deals with the As（Ⅴ） removal from an aqueous medium by calcined refractory grade bauxite （CRB） as a function of solution pH, time, As（Ⅴ） concentration and temperature. The residual As（Ⅴ） was lowered from 2 mg/L to below 0.01 mg/L in the optimum pH range 4.0-7.0 using a 5 g/L CRB within 3 h contact time. The adsorption data fits well with Langmuir isotherm and yielded Langmuir monolayer capacity of 1.78 mg As（Ⅴ）/g of CRB at pH 7.0. Presence of anions such as silicate and phosphate decreased As（Ⅴ） adsorption efficiency. An increase temperature resulted a decrease in the amount of As（Ⅴ） adsorbed by 6%. The continuous fixed bed column study showed that at the adsorbent bed depth of 30 cm and residence time of 168 min, the CRB was capable of treating 340 bed volumes of As（V） spiked water （C0 = 2 mg/L） before breakthrough （Ce = 0.01 mg/L）. This solid adsorbent, although not reusable, can be considered for design of adsorption columns as an efficiency arsenic adsorption media.     

The presence of eggs in the nest and female choice in common freshwater gobies (Rhinogobius brunneus)

In many species of fishes with paternal care, females prefer to spawn with males who are already guarding eggs. We studied the effect of egg presence on female mate choice in common freshwater gobies, Rhinogobius brunneus sp. OR. In our tests, females did not prefer males with eggs, suggesting egg presence per se may not act as a cue to attract females. We also examined the effects of brood size on paternal care and offspring survival to look for possible benefits females could obtain when choosing males with eggs. Both fanning by egg-guarding males and egg survival increased with brood size. The presence of neighboring males did have a significantly negative effect on males' parental activity, which subsequently results in a lower level of egg survival than in solitary egg-guarding males. This result provides a partial explanation for the result of eggs not attracting females to mate.     

Locating major PM10 source areas in Seoul using multivariate receptor modeling

Identifying the major sources contributing to air pollution is a problem of fundamental importance in developing effective air quality management plans. Multivariate receptor modeling aims to achieve this goal by unfolding the air pollution data into components associated with different sources based on factor analysis models. We analyze the PM₁₀ data obtained from 17 monitoring sites in Seoul to locate the major source regions using multivariate receptor modeling. The model uncertainty caused by the unknown number of sources and identifiability conditions is assessed by posterior probability of each model. The estimated source spatial profiles seem to be consistent with our prior expectation about the PM₁₀ sources in Seoul.