Nutrient removal in a pilot and full scale constructed wetland, Putrajaya city, Malaysia

Putrajaya Wetlands in Malaysia, a 200ha constructed wetland system consisting of 24 cells, was created in 1997-1998 to treat surface runoff caused by development and agricultural activities from an upstream catchment before entering Putrajaya Lake (400ha). It was designed for stormwater treatment, flood control and amenity use. The water quality improvement performance of a section of the wetland cells is described. The nutrient removal performance was 82.11% for total nitrogen, 70.73% for nitrate-nitrogen and 84.32% for phosphate, respectively, along six wetland cells from Upper North UN6 to UN1 from April to December 2004. Nutrient removal in pilot scale tank systems, simulating a constructed wetland and planted with examples of common species at Putrajaya, the Common Reed Phragmites karka and Tube Sedge Lepironia articulata, and the capacity of these species to retain nutrients in above and below-ground plant biomass and substrate is reported. The uptake of nutrients by the Common Reed and Tube Sedge from the pilot tank system was 42.1% TKN; 28.9% P and 17.4% TKN; 26.1% P, respectively. The nutrient uptake efficiency of the Common Reed was higher in above-ground than in below-ground tissue. The results have implications for plant species selection in the design of constructed wetlands in Malaysia and for optimizing the performance of these systems.     

Construction and comparison of fluorescence and bioluminescence bacterial biosensors for the detection of bioavailable toluene and related compounds

Environmental pollution with petroleum products such as benzene, toluene, ethylbenzene, and xylenes (BTEX) has garnered increasing awareness because of its serious consequences for human health and the environment. We have constructed toluene bacterial biosensors comprised of two reporter genes, gfp and luxCDABE, characterized by green fluorescence and luminescence, respectively, and compared their abilities to detect bioavailable toluene and related compounds. The bacterial luminescence biosensor allowed faster and more-sensitive detection of toluene; the fluorescence biosensor strain was much more stable and thus more applicable for long-term exposure. Both luminescence and fluorescence biosensors were field-tested to measure the relative bioavailability of BTEX in contaminated groundwater and soil samples. The estimated BTEX concentrations determined by the luminescence and fluorescence bacterial biosensors were closely comparable to each other. Our results demonstrate that both bacterial luminescence and fluorescence biosensors are useful in determining the presence and the bioavailable fractions of BTEX in the environment.     

AUTOMATIC BOTTLE SEALING MECHANISM FOR SEQUENTIAL SAMPLING OF VOLATILE ORGANICS IN WATER1

ABSTRACT: The design, construction, and evaluation of two automatic bottle sealing mechanisms for the collection of volatile organic compounds in water are described. Manually collected samples were either stored in uncapped bottles or in bottles capped with the automatic bottle sealing mechanisms. After 24 hours' storage, significant losses of volatile compounds from uncapped samples occurred even if the samples were stored at 4°C, but not for the samples capped with the automatic bottle sealing mechanisms. The mechanism for sealing the sample bottles was integrated into a commercial sampler with minor modifications to the sampler. The sampling system was then evaluated under controlled conditions to simulate actual field sampling. The results showed that the system was suitable for taking sequential discrete water samples automatically for 24 hours without significant losses of volatile organic compounds.     

Field Exposure Study of Polylactic Acid (PLA) Plastic Films in the Banana Fields of Costa Rica

For use by the banana industry of Costa Rica, polylactic acid (PLA) plastic ropes and banana finger shrouds must remain operational for 14 to 16 weeks, and they also must be able to break down in the soil after serving their purposes. The banana field at La Rebusca Farm (Costa Rica) and the experiment station at University of Costa Rica were selected for a field exposure study of Cargill EcoPla Generation II (GII) and Cargill EcoPla monolayer (Ca-I) PLA films. The average monthly temperature, relative humidity, and cumulative rainfall of the La Rebusca Farm and the University of Costa Rica site were 26 and 22°C, 92 and 84%, and 352 and 177 in., respectively. The PLA plastic films at the La Rebusca Farm lost their mechanical properties earlier than at the University of Costa Rica site because of the higher temperature and relative humidity of the banana farm. The Ca-I film meets the 14-week operational time frame and it is recommended for further studies as ropes and banana shrouds.     

Popular Cognition of National Monuments in Singapore

Monumental features or landmarks in the urban built environment are distinguished by clear form, prominent location, a high degree of visibility and in Lefebvres (1991:143) words, "impose a clearly intelligible message". In Singapore, the gazetting and preservation of national monuments come under the ambit of the Preservation of Monuments Board. From the states perspective, national monuments embody historical value: as enduring landmarks of the city which link the present to the past, they give "lithic memory to the life of a nation" and are integral to the process of building national solidarity, identity and pride. This paper examines popular cognition of Singapores national monuments, that is, the extent to which the general public are able to identify gazetted monuments in visual and nomenclatural terms. A questionnaire survey of 284 respondents selected from a public housing estate as well as in-depth interviews with a smaller sample yielded information on Singaporeans visual recognition, nomenclatural accuracy and historical knowledge with respect to national monuments. The results showed that while visual identification of monuments was strong and the public could clearly identify the main attributes and general forms which national monuments take, the specific names of these monuments were often overlooked and historical knowledge of them rather shallow. In the conclusion, it is argued that if monuments are to serve their purpose as the countrys "psyche" annd "memory", deeper knowledge of the history and meaning behind these monuments must be inculcated in the Singaporean consciousness.     

Sustainable green technology on wastewater treatment: The evaluation of enhanced single chambered up-flow membrane-less microbial fuel cell

This study demonstrated the potential of single chamber up-flow membrane-less microbial fuel cell(UFML-MFC) in wastewater treatment and power generation. The purpose of this study was to evaluate and enhance the performance under different operational conditions which affect the chemical oxygen demand(COD) reduction and power generation,including the increase of KCl concentration(MFC1) and COD concentration(MFC2). The results showed that the increase of KCl concentration is an important factor in up-flow membrane-less MFC to enhance the ease of electron transfer from anode to cathode. The increase of COD concentration in MFC2 could led to the drop of voltage output due to the prompt of biofilm growth in MFC2 cathode which could increase the internal resistance. It also showed that the COD concentration is a vital issue in up-flow membrane-less MFC.Despite the COD reduction was up to 96%, the power output remained constrained.     

DECISION SUPPORT FOR ALLOCATION OF WATERSHED POLLUTION LOAD USING GREY FUZZY MULTIOBJECTIVE PROGRAMMING1

ABSTRACT: This paper uses the grey fuzzy multiobjective programming to aid in decision making for the allocation of waste load in a river system under versatile uncertainties and risks. It differs from previous studies by considering a multicriteria objective function with combined grey and fuzzy messages under a cost benefit analysis framework. Such analysis technically integrates the prior information of water quality models, water quality standards, wastewater treatment costs, and potential benefits gained via in‐stream water quality improvement. While fuzzy sets are characterized based on semantic and cognitive vagueness in decision making, grey numbers can delineate measurement errors in data collection. By employing three distinct set theoretic fuzzy operators, the synergy of grey and fuzzy implications may smoothly characterize the prescribed management complexity. With the aid of genetic algorithm in the solution procedure, the modeling outputs contribute to the development of an effective waste load allocation and reduction scheme for tributaries in this subwatershed located in the lower Tseng‐Wen River Basin, South Taiwan. Research findings indicate that the inclusion of three fuzzy set theoretic operators in decision analysis may delineate different tradeoffs in decision making due to varying changes, transformations, and movements of waste load in association with land use pattern within the watershed.     

Sensitivity analysis of ground-level ozone concentration to emission changes in two urban regions of southeast Texas

Air pollutant emission is one of the predominant factors affecting urban air quality such as ground-level ozone formation. This paper assesses the impact of changing emission inventory scenarios, based on combinations of point, mobile, area/non-road and biogenic sources, on the tropospheric ozone concentration in two southeast Texas urban areas, i.e. Houston-Galveston and Beaumont-Port Arthur, during the rapid ozone formation event (ROFE) on August 25, 2000. The EPA's Community Multiscale Air Quality (CMAQ) modeling system with 1999 national emission inventory (NEI99) estimates and updated SAPRC99 chemical mechanism are used in the sensitivity analysis for twelve different emission scenarios. Based on model results, it is found that the point source emission of NOx and VOC contributes the greatest ozone peak in the ROFE. Removing Texas point sources of VOC and NOx emission from the inventory results in a reduction in peak O3 concentration by 128 and 70 ppbv in Houston urban area, respectively. Similar but less drastic impact from point source is also observed in the Beaumont-Port Arthur area. The effect on peak ozone concentration due to mobile, area and non-road sources emissions are less significant compared to that of point source emission. Reducing VOC emission appears to be more effective than reducing NOx emission in lowering peak O3 concentration in the studied region. Although biogenic emission can contribute up to 37 ppbv of peak ozone level over a large area, the affected area is away from the urban region of concern, and should not be the main cause for O3 non-attainment in the two urban areas. Removing CO emission from mobile sources does not lead to significant reduction (< 1 ppbv) in ozone concentrations. The modeled data also show that the transport of O3 precursors from adjacent states can cause a significant ozone plume near Beaumont due to its proximity to the state border based on the conditions during the August 25, 2000 O3 episode.     

Importance and uncertainty analysis of flue gas scrubber systems with extreme reliability parameter values

Although reliability analyses have been used to improve the reliability of industrial systems, generic reliability data from publications, such as component failure intensities and repair times, are used to calculate reliability measures instead of the real reliability data collected from the plant. One reason is that the repair history of the components is not well managed in the plant. In this work, the effect of extreme reliability parameter values on system reliability and unavailability is studied. To do this, importance and uncertainty analysis of the components of flue gas scrubber systems is carried out, and results calculated with the extreme reliability parameter values are compared with those with the mean reliability values of the systems. The different reliability parameter values can give us totally different ranks of the components critical to the reliability of the representative scrubber system. Consequently, the effort to establish a reliable database is emphasized to perform accurate reliability analysis of the system.     

Application of fluidized bed combustion to industrial waste treatment

Landfill and sea-dumping appear to be on their way out as acceptable methods for the disposal of untreated industrial wastes in Taiwan. Recently, there has been interest in the application of fluidized bed technology to waste incineration for efficient energy utilization and environmental protection. A pilot fluidized bed combustion system was used to investigate the incineration performance and parametric test for the waste from an industrial park. According to the experimental results, the appropriate operating conditions, including temperatures of 800-840 degrees C, aeration rates of U(0)/Um(f)-2.0 or so, and on-bed feeding, were recommended to treat such waste. The emissions of SO(x), NO(x) and CO in flue gas meet the ROC-EPA regulation.