Preparation and evaluation of aminopropyl-functionalized manganese-loaded SBA-15 for copper removal from aqueous solution

A novel material, aminopropyl-functionalized manganese-loaded SBA-15 (NH₂-Mn-SBA-15), was synthesized by bonding 3-aminopropyl trimethoxysilane (APTMS) onto manganese-loaded SBA-15 (Mn-SBA-15) and used as a Cu^2 + adsorbent in aqueous solution. Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction spectra (XRD), N₂ adsorption/desorption isotherms, high resolution field emission scanning electron microscopy (FESEM) and X-ray photoelectron spectroscopy (XPS) were used to characterize the NH₂-Mn-SBA-15. The ordered mesoporous structure of SBA-15 was remained after modification. The manganese oxides were mainly loaded on the internal surface of the pore channels while the aminopropyl groups were mainly anchored on the external surface of SBA-15. The adsorption of Cu^2 + on NH₂-Mn-SBA-15 was fitted well by the Langmuir equation and the maximum adsorption capacity of NH₂-Mn-SBA-15 for Cu^2 + was over two times higher than that of Mn-SBA-15 under the same conditions. The Elovich equation gave a good fit for the adsorption process of Cu^2 + by NH₂-Mn-SBA-15 and Mn-SBA-15. Both the loaded manganese oxides and the anchored aminopropyl groups were found to contribute to the uptake of Cu^2 +. The NH₂-Mn-SBA-15 showed high selectivity for copper ions. Consecutive adsorption–desorption experiments showed that the NH₂-Mn-SBA-15 could be regenerated by acid treatment without altering its properties.     

陶瓷高温除尘技术的研究进展

许多国家都在研究陶瓷高温干法除尘技术，主要用在洁净煤燃烧联合循环发电技术中，讨论当前陶瓷高温除尘技术概要和国内外各种高温除尘技术及其研究状况，并对高温除尘技术的未来情况作出探讨性的预测。     

固定化甲烷八叠球菌研究—─甲烷八叠球菌富集分离和固定化

用亨盖特（Hungate）厌氧技术,以甲醇为唯一碳源获得了甲烷八叠球菌的富集培养物,以甲醇或乙酸钠（或两者各50％）为碳源滚管培养,获得了以甲烷八叠球菌的分离培养物。用聚乙烯醇（PVA）为包埋剂对甲烷八叠球菌sp固定化,并对其特性进行了研究。结果表明：固定化甲烷八叠球菌与非固定化甲烷八叠球菌的总产气量相似,但两者的产气特性有明显不同。固定化甲烷八叠球菌产气迟于非固定化甲烷八叠球菌,固定化甲烷八叠球菌的产气集中,在产气的6天中,平均日产气量30.88mL甲烷,最高产气量可达2.80mL甲烷/h,在产气高峰两天中的产气量占总产气量的66.0％。非固定化甲烷八叠球菌产气平稳,平均日产气量为8.91mL甲烷。固定化甲烷八叠球菌的电子显微镜观察结果表明,细胞在固定介质中多呈较大包囊存在,包囊直径30～50μm。     

厦门春季低空大气酸沉降垂直分布的研究

1993年3月28日～4月7日,在厦门后坑村,对不同高度的低空(1000m以下)大气中气态污染物?云水和雨水进行了垂直分布观测?结果表明:厦门后坑村春季大气中的SO₂,NO_x,O₃的日均值分别是0.069,0.015,0.060mg/m3,基本符合国家大气质量一级标准,而H₂O₂的日均值为1.70μg/m3,是地面大气中H₂O₂浓度的5.3倍,说明其大气氧化活性较强;空中雨水大部分酸化,而云水全部酸化,且NO-3浓度较高,说明春季酸雨污染较严重。      

以农业面源污染阻控为目标的河流生态缓冲带研究进展

河流生态缓冲带是河流生态系统的重要组成部分,一些国家已将河流生态缓冲带的构建与维护作为控制流域面源污染的关键措施.针对河流生态缓冲带的农业面源污染阻控功能,梳理了河流生态缓冲带的研究进展.基于河流生态缓冲带类型的划定,重点总结了河岸植被缓冲带的阻控机制及影响阻控效果的主要因素、氮磷削减途径和缓冲带生态构建模式,并就植被...     

地铁乘客疏散帮助行为及其影响因素的SEM模型*

为研究地铁疏散中乘客帮助行为及其影响因素之间的作用机制,通过对武汉市地铁站乘客疏散行为进行问卷调查,从普通乘客特征、特殊群体特征、安全认知、疏散环境和恐慌心理5个维度出发,构建地铁乘客疏散帮助行为及其影响因素的结构方程模型。研究结果表明:普通乘客特征、特殊群体特征、安全认知对帮助行为具有直接正向影响,其中安全认知对乘客是否提供帮助行为的影响最大;恐慌心理、疏散环境对帮助行为具有直接负向影响,其中恐慌心理影响较大;安全认知还通过中介变量普通乘客特征、特殊群体特征、疏散环境和恐慌心理对帮助行为产生间接影响。     

KMnO4改性活性炭对臭气中甲硫醇的吸附特性

针对普通活性炭对污水厂臭气中甲硫醇吸附量低的问题,采用KMnO4浸渍改性以获得高甲硫醇吸附量的改性活性炭,通过低温氮吸附仪、扫描电子显微镜和Boehm滴定等表征揭示改性后活性炭吸附量提高的原因,并进行改性活性炭吸附甲硫醇的动力学和热力学研究。结果表明:在KMnO_4浓度为1%、温度为25℃、活性炭与浸渍液质量比为8∶100的条件下浸渍6 h,改性活性炭对甲硫醇的静态吸附量最高,达到344.22 mg·g~(-1),是未改性前的4.04倍:改性活性炭对甲硫醇吸附量提高的原因主要是表面碱性基团的增加(是原来的2.53倍),以及微孔容积和比表面积的增加。改性活性炭对甲硫醇的吸附符合准二级动力学模型,同时粒子内扩散模型显示吸附过程由气相扩散和内扩散共同作用;符合Freundlich吸附等温方程,具有多层吸附特征,且吸附容易进行,属于优惠吸附,是一个自发、放热和熵减的过程,升温不利于对甲硫醇的吸附。     

老年人照料设施中失能老人疏散策略研究*

为探究高效安全的老年人照料设施中失能老人疏散策略,通过构建失能老人全部疏散模式、佩戴防毒面具的就地保护模式和混合疏散模式下护理人员的行为模型,以河南平顶山“5.25”特别重大火灾事故为背景,运用Pathfinder2018软件模拟佩戴防毒面具的就地保护模式下防毒面具集中存放和独立存放方式对疏散效果影响,分析防毒面具独立存放条件下混合疏散模式的疏散效果。结果表明:防毒面具独立存放方式较集中存放方式用时减少86.8 s,减少了38.8%;护理人员辅助救助时间与运动时间、疏散距离、救护老人人数和救助房间数有关,集中存放方式下救助房间数影响较大,独立存放方式下救助房间数对辅助救护时间影响不明显;防毒面具独立存放方式下混合疏散模式与佩戴防毒面具的就地保护模式相比,火灾直接威胁区内失能老人疏散时间减少19.775 s,减少了16.6%,疏散效率高,实效性强。研究结果对医疗机构和托幼机构人员疏散具有一定的借鉴意义。     

Determination of road dust loadings and chemical characteristics using resuspension

The contribution of fugitive dust from traffic to air pollution can no longer be ignored in China. In order to obtain the road dust loadings and to understand the chemical characteristics of PM₁₀ and PM_2.5 from typical road dust, different paved roads in eight districts of Beijing were selected for dust collection during the four seasons of 2005. Ninety-eight samples from 28 roads were obtained. The samples were resuspended using equipment assembled to simulate the rising process of road dust caused by the wind or wheels in order to obtain the PM₁₀ and PM_2.5 filter samples. The average road dust loading was 3.82 g m^− 2, with the highest of 24.22 g m^− 2 being in Hutongs in the rural–urban continuum during winter. The road dust loadings on higher-grade roads were lower than those on lower-grade roads. Attention should be paid to the pollution in the rural–urban continuum areas. The sums of element abundances measured were 16.17% and 18.50% for PM₁₀ and PM_2.5 in road dust. The average abundances of OC and EC in PM₁₀ and PM_2.5 in road dust were 11.52%, 2.01% and 12.50%, 2.06%, respectively. The abundance of elements, water-soluble ions, and OC, EC in PM₁₀ and PM_2.5 resuspended from road dust did not change greatly with seasons and road types. The soil dust, construction dust, dust emitted from burning coal, vehicle exhaust, and deposition of particles in the air were the main sources of road dust in Beijing. Affected by the application of snow-melting agents in Beijing during winter, the amount of Cl⁻ and Na⁺ was much higher during that time than in the other seasons. This will have a certain influence on roads, bridges, vegetations, and groundwater.