华阳河湖群底泥沉积物特性研究

对华阳河湖群底泥沉积物的粒径、有机质、总磷、总氮含量进行研究,探讨华阳河湖群龙感湖、黄大湖(由大官湖和黄湖组成)、泊湖三大湖区底泥污染物表层及垂向分布规律。结果表明,黄大湖污染程度最大,其底泥中有机质、总磷和总氮含量均比其它湖区要高;有机质,总磷和总氮随着深度而降低,底泥再悬浮释放污染物风险较大;在龙感湖和黄大湖中,总磷和有机质弱相关,总氮和有机质正相关,泊湖则相反,表明3个湖泊底泥沉积物中氮、磷污染负荷的来源有所不同。该研究为研究华阳河湖群内源污染负荷特征和制定湖泊污染综合整治策略提供重要的科学依据。     

高桩码头的振动测量与分析

测量了高平潮、低平潮及两潮位之间三个时段某高桩码头工作平台的振动情况,比较了不同潮位下振动的最大位移值.对测量数据进行了分析,发现海浪对结构振动的位移大小影响明显,得到了工作平台的前三阶自振频率.利用两点差法,根据码头平动记录求取了码头沿垂直轴向的码头扭转分量,经计算码头转角在10-7rad量级,码头扭转的转动中心按照...     

林火烈度评价及其空间异质性研究进展

回顾了林火烈度评价的方法,包括单因素评价、综合评价和遥感技术的应用等;综述了林火烈度空间异质性的最新研究进展;展望了林火烈度及其空间异质性研究的未来发展趋势。     

Biocompatible self-healing hydrogels based on boronic acid-functionalized polymer and laponite nanocomposite for water pollutant removal

Environmental Chemistry Letters - Global water pollution by organic dyes and metals may be solved by adsorption. In particular, hydrogel adsorbents display unique...     

高频超声波降解4-氯酚的反应机理及试验研究

探讨了高频超声波（1.7MHz)降解4-氯酚的反应过程和反应机理，研究了高频超声波降解4-氯酚的效果及4-氯酚的初始浓度，高级氧化方法（AOPs)等因素对降解效果的影响。试验结果表明，高频超声波降解4-氯酚为一级反应，超声波空化效应在降解过程中起主导作用。超声波与其他氧化方法联用可大大提高降解效率。具有良好的工业应用前景。     

共代谢膜生物反应器法处理二甲基亚砜废水

采用蔗糖作为共代谢基质与一体式好氧膜生物反应器（MBR）工艺相结合处理二甲基亚砜（DMSO）废水。考察了装置的污泥驯化效果、DMSO去除率、污泥的性能、HRT和冲击负荷对DMSO去除率的影响。试验结果表明：驯化第29天,DMSO去除率达98.5%,表明MBR内的污泥已驯化成功;在MBR运行的正式期,当DMSO处于高负荷状态时,DMSO去除率较低;随蔗糖加入量的增加,DMSO去除率逐渐提高,最终恢复到DMSO高负荷冲击前的DMSO去除效果;正常运行时,装置进水ρ（DMSO）=257~1 448 mg/L（平均值为718 mg/L）、出水ρ（DMSO）=6~22 mg/L（平均值为7 mg/L）,DMSO去除率为96.4%~99.6%（平均值为98.9%）;在MBR运行的正式期,污泥体积指数小于100 mL/g,表明污泥的沉降性能较好,MLVSS/MLSS较高,表明污泥的活性高,MBR内MLSS的平均值为5.52 g/L,MLVSS的平均值为4.78 g/L;MBR适宜的HRT为12 h。     

TiO_2光催化对微滤去除腐殖酸的膜污染控制研究

着重研究了不同紫外灯光源和照射时间条件下,TiO_2光催化(PCO)对微滤去除腐殖酸过程中的膜污染控制,并探讨了膜污染的控制机理。研究结果表明,TiO_2光催化能有效提高微滤对腐殖酸的去除,同时降低膜通量的下降,起到有效控制膜污染的作用。进一步的实验分析表明,TiO_2光催化控制膜污染的主要机理在于将腐殖酸降解为易于被TiO_2吸附的小分子量物质,吸附腐殖酸降解产物后的TiO_2聚合颗粒粒径增大,易于在膜表面形成更为松散的沉积层,并使膜污染从以膜孔堵塞和沉积层污染为主转化为以沉积层污染为主的可逆性污染。     

溶胶-凝胶法制备磁载光催化剂

悬浮态的光催化反应器相比固载的光催化反应器有更高的光催化效率。但是如何在光催化反应完成后使催化剂与水溶液的分离 ,成为了一个关键的问题。本研究采用溶胶 凝胶法将二氧化钛直接沉积在磁性颗粒的表面 ,制备出了磁载的光催化剂。这种催化剂在保留了磁性能具有可磁分离的基础上又具有很好的光催化降解效果。     

Disinfection byproducts in drinking water and regulatory compliance: A critical review

Disinfection by-products (DBPs) are regulated in drinking water in a number of countries. This critical review focuses on the issues associated with DBP regulatory compliance, including methods for DBP analysis, occurrence levels, the regulation comparison among various countries, DBP compliance strategies, and emerging DBPs. The regulation comparison between China and the United States (US) indicated that the DBP regulations in China are more stringent based on the number of regulated compounds and maximum levels. The comparison assessment using the Information Collection Rule (ICR) database indicated that the compliance rate of 500 large US water plants under the China regulations is much lower than that under the US regulations (e.g. 62.2% versus 89.6% for total trihalomethanes). Precursor removal and alternative disinfectants are common practices for DBP regulatory compliance. DBP removal after formation, including air stripping for trihalomethane removal and biodegradation for haloacetic acid removal, have gained more acceptance in DBP control. Formation of emerging DBPs, including iodinated DBPs and nitrogenous DBPs, is one of unintended consequences of precursor removal and alternative disinfection. At much lower levels than carbonaceous DBPs, however, emerging DBPs have posed higher health risks.     

A model of 90Sr distribution in the sea near Daya Bay Nuclear Power Plant in China

The impact on the environment ofradionuclide release from nuclear power plants has attracted increased attention, especially after the accident at Fukushima Daiichi Nuclear Power Plant in Japan. Based on the mechanisms of adsorption/desorption at solid/liquid interfaces and a surface micromorphology model of sediments, a theoretical expression of the distribution coefficient Kd is derived. This coefficient has significant effects on the distribution of radionuclide in seawater, suspended sediment and seabed sediment. Kd is then used to simulate ^90Sr transport in the sea near the Daya Bay Nuclear Power Plant. The simulation results are compared with field measurements of tidal level, current velocity, suspended sediment concentration and ^90Sr concentrations in the same period. Overall, the simulated results agree well with the field measured data. Thus, the derived expression for Ka is capable of interpreting realistic adsorption/desorption processes. What＇s more, conclusion is drawn that about 40% ^90Sr released by Daya Bay Nuclear Power Plant will be adsorbed by suspended sediment and 20% by seabed sediment, only about 40% ^90St will remain in the sea near Daya Bay Nuclear Power Plant in South China Sea.