“十一五”期间通辽市环境质量存在的主要问题及成因

本文通过对＂十一五＂期间通辽市环境质量监测数据的统计分析,从污染源和环境质量的关系得出存在的问题,从自然环境要素与生态环境两个角度总结＂十一五＂期间存在的问题。通过对环境质量的问题分析,寻找产生这些问题的原因,从而为改善环境质量提供解决的途径。     

中国环境风险现状及发展趋势分析

基于国内2000-2009年以来环境污染事故统计资料,深入分析了中国现阶段环境风险类型、事故高发区域、事故损失、环境风险事故诱因等特征,并对其环境风险演变趋势进行了判断。新时期中国经济增长方式处于转变阶段,以布局型环境隐患和结构型环境风险为首要威胁,风险类型更加复杂化,事故影响范围进一步扩大,由于居民消费转型与科技发展带来的新型环境风险更是不可预知,环境风险压力进一步增大。     

三岔河沿岸植物铅、镉富集特性的研究

以紫茎泽兰（EupatoriumadenophorumSpreng）、青蒿（HerbaArtemisiaeAnnuae）、三叶鬼针草（Bidenspilosa）、野牡丹（MelastomaAfffine D．Don）、光叶蕨（Knuiwatsukiacuspidata）为例,分别在河边、路边、山上和污水灌溉的旱地4个采样点采取5种植物的根部和茎叶,测量重金属元素Pb、Cd的含量、富集系数和转移系数并分析数据。结果表明,各种植物不同器官在不同环境中对重金属元素Pb、Cd的富集和转移水平各不相同,就平均水平来说三叶鬼针草对重金属Pb、Cd的富集系数较大,转移系数也高,但其对Pb的转移量明显高于Cd的转移量;紫茎泽兰对重金属元素Cd的富集和转移速度相对高于其它4种植物,说明紫茎泽兰对Cd的吸收和转移比较快,可作为受镉污染土壤进行改良的备选植物种。     

排污权交易之排放跟踪数据校核研究

本文以排污权交易的核心业务排放跟踪管理为出发点,选择电厂二氧化硫指标进行排放跟踪数据过程校核体系研究,探索进一步提高排污权交易体系中排放数据准确性的机制。     

SCADA系统在污染物治污工况在线监控系统中的应用

本文介绍了SCADA系统在内蒙古自治区重点污染源治污工况在线监控系统中的应用,系统以西门子成熟S7—200系列可编程序控制器为在线监测设备,基于OPC（OLE for Process Control）技术,以WINCC为监控平台,实现了自治区内重点污染源企业治污工况的远程监测、污染物排放的有效管理。     

氟磺隆水解动力学研究

采用试验室内模拟试验的方法,研究不同pH的缓冲溶液和不同自然水体对氟磺隆水解的影响。实验结果表明,不同pH缓冲溶液和不同自然水体对氟磺隆水解速率均有不同程度的影响。在碱性条件下氟磺隆的水解速率最快,半衰期为0.2 d,酸性条件下次之,半衰期为6.0 d,在中性条件下水解较慢,半衰期为15.7 d,而在不同自然水体中氟磺隆的降解速率为:伊通河水稻田水青湖水蒸馏水。     

Investigation of a new approach to decompose two potent greenhouse gases: photoreduction of SF(6) and SF(5)CF(3) in the presence of acetone

In this paper, we addressed the utilization of photochemical method as an innovative technology for the destruction and removal of two potent greenhouse gases, SF(6) and SF(5)CF(3). The destruction and removal efficiency (DRE) of the process was determined as a function of excitation wavelength, irradiation time, initial ratio of acetone to SF(5)X (X represented F or CF(3)), initial SF(5)X concentration, additive oxygen and water vapor concentration. A complete removal was achieved by a radiation period of 55min and 120min for SF(6)-CH(3)COCH(3) system and SF(5)CF(3)-CH(3)COCH(3) system respectively under 184.9nm irradiation. Extra addition of water vapor can enhance DRE by approximately 6% points in both systems. Further studies with GC/MS and FT-IR proved that no hazardous products such as S(2)F(10), SO(2)F(2), SOF(2), SOF(4) were generated in this process.     

Sb release characteristics of the solid waste produced in antimony mining smelting process

Sb release characteristics of blast furnace slag, mining waste rock and tailing sand were investigated in static immersion and dynamic leaching test. These three kinds of waste samples were collected from the antimony mine in Lengshuijiang, China, produced in mining smelting process. Effects of solid/liquid ratio, sample size and pH of leaching solution on Sb release characteristics were inspected based on the analysis of scanning electron microscope, pH and EC of leachate. The optimal parameters for Sb leaching of each sample were analyzed. For blast furnace slag and mining waste rock, Sb release contents increased along with the decline of solid/liquid ratio. The maximum accumulative release contents were 42.13, 34.26 mg/kg at the solid/liquid ratio of 1:20. While Sb release content for tailing sand decreased first and then increased with the reduction of solid/liquid ratio. When the solid/liquid ratio was 1:5, the accumulative Sb release content reached the most (24.30 mg/kg). Sb release content of mining waste rock increased with the drop of leaching solution pH, with the highest accumulative release content of 26.01 mg/kg at pH 2.0. Sb release contents of blast furnace slag and tailing sand showed positive correlation with the variation of leaching solution pH. The maximum accumulative release contents of these two samples were 215.91 and 147.83 mg/kg, respectively, when leaching solution pH was 7.0. In summary, Sb release capacity of the three samples in descending order was tailing sand, blast furnace slag and mining waste rock. pH and EC of the leachate in dynamic test varied independently with the initial pH of leaching solution while showing close relationship with mineral hydrolysis in the waste.     

自养型锰氧化菌的选育及除锰效果研究

自养型生物除锰滤池可以有效地去除地下水中的锰,为了获取接种该滤池的菌种并探究其除锰效果,利用改良的JFM培养基对曝气池中的活性污泥进行驯化培养,筛选出了除锰率在90%以上的高效自养型锰氧化菌。通过平板培养和革兰氏染色,得到3种不同的菌落且均为阴性菌,16S rDNA基因组测序发现5种不同的科属。菌液经过2个周期的传代培养,探究其除锰效果,最高除锰率达到了98%。     

Effect of alginate on the aggregation kinetics of copper oxide nanoparticles (CuO NPs): bridging interaction and hetero-aggregation induced by Ca<Superscript>2+</Superscript>

The stability of CuO nanoparticles (NPs) is expected to play a key role in the environmental risk assessment of nanotoxicity in aquatic systems. In this study, the effect of alginate (model polysaccharides) on the stability of CuO NPs in various environmentally relevant ionic strength conditions was investigated by using time-resolved dynamic light scattering. Significant aggregation of CuO NPs was observed in the presence of both monovalent and divalent cations. The critical coagulation concentrations (CCC) were 54.5 and 2.9 mM for NaNO₃ and Ca(NO₃)₂, respectively. The presence of alginate slowed nano-CuO aggregation rates over the entire NaNO₃ concentration range due to the combined electrostatic and steric effect. High concentrations of Ca²⁺ (>6 mM) resulted in stronger adsorption of alginate onto CuO NPs; however, enhanced aggregation of CuO NPs occurred simultaneously under the same conditions. Spectroscopic analysis revealed that the bridging interaction of alginate with Ca²⁺ might be an important mechanism for the enhanced aggregation. Furthermore, significant coagulation of the alginate molecules was observed in solutions of high Ca²⁺ concentrations, indicating a hetero-aggregation mechanism between the alginate-covered CuO NPs and the unabsorbed alginate. These results suggested a different aggregation mechanism of NPs might co-exist in aqueous systems enriched with natural organic matter, which should be taken into consideration in future studies.

Open image in new window

Graphical abstract Hetero-aggregation mechanism of CuO nanoparticles and alginate under high concentration of Ca²⁺