Comparative studies of the Fe3+/2+-UV, H2O2-UV, TiO2-UV/vis systems for the decolorization of a textile dye X-3B in water

The degradation of a common textile dye, Reactive-brilliant red X-3B, by several advanced oxidation technologies was studied in an air-saturated aqueous solution. The dye was resistant to the UV illumination (wavelength λ  320 nm), but was decolorized when one of Fe³⁺, H₂O₂ and TiO₂ components was present. The decolorization rate was observed to be quite different for each system, and the relative order evaluated under comparable conditions followed the order of Fe²⁺–H₂O₂–UV  Fe²⁺–H₂O₂ > Fe³⁺–H₂O₂–UV > Fe³⁺–H₂O₂ > Fe³⁺–TiO₂–UV > TiO₂–UV > Fe³⁺–UV > TiO₂–visible light (λ  450 nm) > H₂O₂–UV > Fe²⁺–UV. The mechanism for each process is discussed, and linked together for understanding the observed differences in reactivity.     

Levels of PCDDs and PCDFs in two kinds of fast foods in Korea

We initiated an attempt to gather preliminary Korean fast food data on the concentrations, whole weight and international toxic equivalent (TEQ), in two kinds of fast foods, hamburger and fried chicken. The levels of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDDs/PCDFs) in hamburgers are detected to be lower than in fried chickens. Total TEQ level of PCDDs in fried chicken is 47.45 times higher than in hamburger. In case of PCDFs, it is 48.61 times. Even though these are compared to the only one brand and three samples each, we think that these high levels of PCDDs/PCDFs in fried chicken are very important data because of the potentially increasing daily intake. If we continue to survey for PCDDs/PCDFs in fast foods more even, especially fried chicken, these data will be useful to calculate the estimated daily intake of TEQ levels of PCDDs/PCDFs in Korea.     

A mechanism for mercury oxidation in coat-derived exhausts

This paper evaluates an elementary reaction mechanism for Hg0 oxidation in coal-derived exhausts consisting of a previously formulated homogeneous mechanism with 102 steps and a new three-step heterogeneous mechanism for unburned carbon (UBC) particles. Model predictions were evaluated with the extents of Hg oxidation monitored in the exhausts from a pilot-scale coal flame fired with five different coals. Exhaust conditions in the tests were very similar to those in full-scale systems. The predictions were quantitatively consistent with the reported coal-quality impacts over the full range of residence times. The role of Cl atoms in the homogeneous mechanism is hereby supplanted with carbon sites that have been chlorinated by HCl. The large storage capacity of carbon for Cl provided a source of Cl for Hg oxidation over a broad temperature range, so initiation was not problematic. Super-equilibrium levels of Cl atoms were not required, so Hg was predicted to oxidize in systems with realistic quench rates. Whereas many fundamental aspects of the heterogeneous chemistry remain uncertain, the information needed to characterize Hg oxidation in coal-derived exhausts is now evident: complete gas compositions (CO, hydrocarbons, H2O, O2 NOx, SOx), UBC properties (size, total surface area), and the ash partitioning throughout the exhaust system are required.     

Chlorinated persistent organic pollutants in black-tailed gulls (Larus crassirostris) from Hokkaido, Japan

Concentrations and patterns of several chlorinated persistent organic pollutants (POPs) including polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and biphenyls (PCBs) and DDTs, HCHs, CHLs and HCB were determined in black-tailed gulls (Larus crassirostris) from breeding grounds in Hokkaido, Japan. Subcutaneous fat of five adult gulls was analyzed, which had different concentrations of target compounds, whereas gull eggs contained similar concentrations of target compounds. Similar congener profiles were found between adult gulls and eggs. The concentrations of non-ortho PCBs varied from 3.4 to 13.5 ng/g lipid weight (lw) in the fat of black-tailed gulls and from 2.4 to 7.4 ng/g lw in their eggs. 2,3,7,8-PCDD/Fs occurred at relatively lower concentrations than non-ortho PCB congeners in both adult gulls and eggs. The total TEQs (toxic equivalents, PCDD/Fs+ non-ortho PCB) ranged from 0.26 to 1.0 ng/g lw in adult gulls and ranged from 0.19 to 0.58 ng/g lw in eggs.     

Comparison of models for describing measured VOC emissions from wood-based panels under dynamic chamber test condition

Measured emission factors are the experimental data used to represent emission characteristics of volatile organic compounds (VOCs) from testing materials under dynamic chamber test conditions. A simple empirical model that describes the measured emission factors will be very useful for practical purposes. In this study, a power law model was compared with a widely used first-order exponential decay model in their ability to describe measured emission factors of wood-based panel materials. It was demonstrated that the power law model is a better choice than the first-order model for describing emission characteristics for short-term (less than 100 h) experimental data. The power law model was also more superior in predicting long-term (up to 900 h) emission factors.     

Analysis of air toxics emission inventory: inhalation toxicity-based ranking

Air toxics emission inventories play an important role in air quality regulatory activities. Recently, Minnesota Pollution Control Agency (MPCA) staff compiled a comprehensive air toxics emission inventory for 1996. While acquiring data on the mass of emissions is a necessary first step, equally important is developing information on the potential toxicity of the emitted pollutants. To account for the toxicity of the pollutants in the emission inventory, inhalation health benchmarks for acute effects, chronic effects, and cancer were used to weight the mass of emissions. The 1996 Minnesota emissions inventory results were ranked by mass of emissions and by an index comprised of emissions divided by health benchmarks. The results show that six of eight pollutants ranked highest by toxicity were also the pollutants of concern indicated in environmental monitoring data and modeling data. Monitoring data and modeling results did not show high impacts of the other two pollutants that were identified by the toxicity-based emission ranking method. The biggest limitation in this method is the lack of health benchmark values for many pollutants. Despite uncertainties and limited information, this analysis provides useful information for further targeting pollutants and source categories for control.     

Microsomal monooxygenase activity in Tilapia (Oreochromis mossambicus) exposed to a bleached kraft mill effluent using different exposure systems.

Bleached kraft pulp and paper mill effluents (BKMEs) are known to have adverse effects on aquatic organisms. One of the effects of BKMEs is its ability to induce cytochrome P4501A activity in exposed fish. 7-Ethoxyresorufin O-deethylase (EROD) activity is the most common biomarker used to measure the mixed-function monooxygenase activity. In this study, Tilapia were exposed to BKMEs using different exposure systems and their hepatic EROD activity, as well as liver/somatic index (LSI), were determined. In the Phase I study, Tilapia treated with betaNF and a whole (100%) BKME using a static, non-renewal system exhibited statistically significant EROD induction, but LSI values were not altered. In the Phase II study, fish were either caged in the mill's fishpond with the whole effluent passing through or cultured in tanks receiving 100% of the BKME continuously using a flow-through system in the laboratory. Their EROD activities were then compared with the non-exposed fish (control). The EROD activities in both groups of fish were elevated significantly with the greatest induction being observed in the field-exposed group. The LSI values in all of the field-exposed fish were significantly greater than the control Tilapia. The EROD assay was sensitive in detecting biological changes in fish exposed to the BKME. Further studies are warranted to better understand the impacts of BKMEs on aquatic organisms in Taiwan.     

Effects of leachate recirculation on biogas production from landfill co-disposal of municipal solid waste,sewage sludge and marine sediment

Leachate recirculation is an emerging technology associated with the management of landfill. The impact of leachate recirculation on the co-disposal of three major wastes (municipal solid waste, sewage sludge and sediment dredgings) was investigated using a laboratory column study. Chemical parameters (pH, COD, ammoniacal-N, total-P) and gas production (total gas volume, production rates and concentrations of CH4 and CO2) were monitored for 11 weeks. Leachate recirculation reduced waste-stabilization time and was effective in enhancing gas production and improving leachate quality, especially in terms of COD. The results also indicated that leachate recirculation could maximize the efficiency and waste volume reduction rate of landfill sites.     

Trace analysis of dissolved polychlorinated organic compounds in the water of the Yangtse River (Nanjing, China)

Eighteen organochlorine contaminants from the water samples of the Yangtse River have been qualitatively and quantitatively analyzed. The analysis of polychlorinated organic compounds (PCOCs) extracted by C18 Solid Phase Extract (SPE) was performed using HP6890 gas chromatograph coupled by ECD detector. The analytical results demonstrate that the analytical methods are reliable based on the fact that most of the recoveries for the targeted compounds are 60-90%. Most of the concerned contaminants, i.e. chlorinated pesticides and PCBs were found in the water samples of the Yangtse River, but their concentration was very low, <2.97 ng l(-1), which is far less than 1 microg l(-1)--the standard of drinking water of China. It is apparent that the PCOCs were in high concentration during the dry season, and in low concentration during the rainy season. The situation of PCOCs contamination in the water of the Yangtse River in 1999 was greatly improved in comparison with 10 years ago.     

Migration of a water pulse through fractured porous media

Contaminant transport from waste-disposal sites is strongly affected by the presence of fractures and the degree of fracture matrix interaction. Characterization of potential contaminant plumes at such sites is difficult, both experimentally and numerically. Simulations of water flow through fractured rock were performed to examine the penetration depth of a large pulse of water entering such a system. Construction water traced with lithium bromide was released during the excavation of a tunnel at Yucca Mountain, Nevada, which is located in an unsaturated fractured tuff formation. Modeling of construction-water migration is qualitatively compared with bromide-to-chloride ratio (Br/Cl) data for pore-water salts extracted from drillcores. The influences of local heterogeneities in the fracture network and variations in hydrogeologic parameters were examined by sensitivity analyses and Monte Carlo simulations. The simulation results are qualitatively consistent with the observed Br/Cl signals, although these data may only indicate a minimum penetration depth, and water may have migrated farther through the fracture network.