Long-term engineering properties of recycled plastic lumber used in pier construction

Plastic lumber manufactured using post consumer waste plastic has been proposed as an acceptable material for use in the construction of docks, piers and bulkheads and is touted to outlast conventional wood products due to its strength, durability and resistance to rot. This study examines the long-term engineering properties of plastic lumber manufactured using post consumer waste plastic (TRIMAX, Ronkonkoma, NY). Plastic lumber profiles were used in the decking of a pier built in West Meadow Creek, Old Field, NY during December 1995. Samples of plastic lumber were removed from the deck of the pier periodically over a two-year period and returned to the laboratory for testing. Results of engineering tests showed the in-plane compression modulus (260±30 MPa), dimensional stability and the Shore D surface hardness (60±2) of plastic lumber removed from the pier remained similar to or greater than their pre-placement values. In contrast, significant changes in the modulus of elasticity of plastic lumber were measured with prolonged weathering. The modulus of elasticity of plastic lumber initially decreased from 1370 Pa to 750 Pa following 12 months weathering, a decrease equal to 45% of its pre-placement value and then increased during the second year to close to its initial value. The high variability in the modulus of elasticity should restrict the use of plastic lumber profiles to non-load bearing structural applications.     

ADSORPTION IN MULTICOMPONENT SOLUTION BY ACTIVATED CARBON

It was found that the total adsorptive capacity of activated carbon was enhanced by using a multicomponent solution with glucose, peptone and phenylphosphonic acid. A maximum use of the carbon adsorptive capacity is possible if the carbon is used for tertiary treatment followed by treating a stronger waste.     

Wood carbon content of tree species in Eastern China: interspecific variability and the importance of the volatile fraction

Data on the mass density and carbon content of tree organs, and in particular stem wood, are essential for accurate assessments of forest carbon sequestration. However most available data, including that for East Asia, has neglected the volatile C fraction. Wood samples were collected and assayed for C content from 14 native tree species in Jilin Province, NE China. C content showed statistically significant variation among species, ranging from 48.4% to 51.0%. The volatile C fraction was non-negligible, averaging 2.2%, and showed high variation among species. As found in prior studies, wood C content was appreciably higher in conifer than hardwood (angiosperm) species (50.8+/-0.1% vs. 49.5+/-0.2%, respectively). Wood carbon density (gC/cm(3)) showed very high inter-specific variation, due mainly to differences in wood specific gravity. Our analyses, in conjunction with recently published data from North America, indicate a global mean value of 47.5+/-0.5% wood C content exclusive of volatile C; the widely used 50% figure corresponds more closely to total wood C inclusive of the volatile fraction. Failure to include volatile C or to use species- or higher-taxon-specific C content values in forest C assessments is likely to introduce biases on the order approximately 4-6%. In addition, the stocks and flows of the volatile C fraction in wood are in themselves an important and sorely neglected aspect of forest C processes likely to be strongly impacted by harvests and other management practices.     

Dendrochemical record of historical lead contamination sources, Wells G&H Superfund site, Woburn, Massachusetts

Laser-ablation inductively coupled-plasma mass-spectrometry analysis of red oak (Quercus rubra) from a well documented heavy metal contaminated United States Environmental Protection Agency superfund site in Woburn, Massachusetts reveals decade-long trends in Pb contaminant sources. Lead isotope ratios (207Pb/206Pb and 208Pb/206Pb) in tree rings plot along a linear trend bracketed by several local and regional contamination sources. Statistically significant interannual variations in 207Pb/206Pb suggest that atmospheric Pb is rapidly incorporated into wood, with minimal mobility subsequent to deposition in annual growth rings. We interpret the decadal trends in our record as a changing mixture of local pollution sources and gasoline-derived Pb. Between 1940 and 1970, Pb was predominantly derived from remobilization of local industrial Pb sources. An abrupt shift in 207Pb/206Pb may indicate that local Pb sources were overwhelmed by gasoline-derived Pb during the peak of leaded gasoline emissions in the late 1960s and early 1970s.     

Economically optimal nitrogen rate reduces soil residual nitrate

Post-harvest residual soil NO(3)-N (RSN) is susceptible to transfer to water resources. Practices that minimize RSN levels can reduce N loss to the environment. Our objectives were (i) to determine if the RSN after corn (Zea mays L.) harvest can be reduced if N fertilizer is applied at the economically optimal N rate (EONR) as compared to current producer practices in the midwestern USA and (ii) to compare RSN levels for N fertilizer rates below, at, and above the EONR. Six experiments were conducted in producer fields in three major soil areas (Mississippi Delta alluvial, deep loess, claypan) in Missouri over 2 yr. Predominant soil great groups were Albaqualfs, Argiudolls, Haplaquolls, and Fluvaquents. At four transects in each field, six treatment N rates from 0 to 280 kg N ha(-1) were applied, the EONR was determined, and the RSN was measured to a 0.9-m depth from five treatment plots. The EONR at sampling sites varied from 49 to 228 kg N ha(-1) depending on site and year. Estimated average RSN at the EONR was 33 kg N ha(-1) in the 0.9-m profile. This was at least 12 kg N ha(-1) lower than RSN at the producers' N rates. The RSN increased with increasing Delta EONR (total N applied - EONR). This relationship was best modeled by a plateau-linear function, with a low RSN plateau at N rates well below the EONR. A linear increase in RSN began anywhere from 65 kg N ha(-1) below the EONR to 20 kg N ha(-1) above the EONR at the three sites with good data resolution near the EONR. Applying N rates in excess of the EONR produced elevated RSN values in all six experiments. Our results suggest that applying the EONR will produce environmental benefits in an economically sound manner, and that continued attempts to develop methods for accurately predicting EONR are justified.     

A simple model to assess nitrogen and phosphorus contamination in ungauged surface drainage networks: application to the Massaciuccoli Lake Catchment, Italy

Modeling is a common practice to evaluate factors affecting water quality in environmental systems impaired by point and nonpoint losses of N and P. Nevertheless, in situations with inadequate information, such as ungauged basins, a balance between model complexity and data availability is necessary. In this paper, we applied a simplified analytical model to an artificially drained floodplain in central-western Italy to evaluate the importance of different nutrient sources and in-stream retention processes and to identify critical source areas. We first considered only a set of chemical concentrations in water measured from February through May 2008 and from November 2008 through February 2009. We then broadened available data to include water discharge and hydraulic-head measurements to construct a hydrogeological model using MODFLOW-2000 and to evaluate the reliability of the simplified method. The simplified model provided acceptable estimates of discharge (ranging from 0.03-0.75 m s) and diffuse nutrient inputs from water table discharge and in-stream retention phenomena. Estimates of PO-P and total P retention (ranging from 1.0 to 0.6 μg m s and from 1.18 to 0.95 μg m s for PO-P and total P, respectively) were consistent with the range of variability in literature data. In contrast, the higher temporal variability of nitrate concentrations decreased model accuracy, suggesting the need for more intensive monitoring. The model also separated the dynamics of different reaches of the drainage network and identified zones considered critical source areas and buffer zones where pollutant transport is reduced.     

WATER MULTIPLIERS - REGIONAL IMPACT ANALYSIS1

A significant research problem is the assessment of impacts associated with growth and/or decline in a regional economy. A relevant method for analyzing such problems is the Leontief input/output model. Associated with these models are economic multipliers measuring total changes in sales, income, and employment. In this paper, the author contends resource multipliers are equally relevant. The specific form of these multipliers are defined. Water multipliers for a two-county region in central Nevada are presented and their uses described.     

Radionuclides as indicators of sediment transport in agricultural watersheds that drain to Lake Erie

An issue in evaluating the success of agricultural management practices is the speed that eroded particles make their way through the downstream waters. In this study at Old Woman Creek (OWC) and Rock Creek (RC), two largely agricultural watersheds in Ohio, the flux of sediment and radionuclides (7Be, 210Pb, and 137Cs) in thunderstorm runoff was examined to better understand transport of eroded agricultural soils. The hydrograph in an agricultural area under no-till was similar in timing, but of lesser magnitude, than the hydrograph from a similar-sized area under conventional tillage. The activities of 210Pb and 7Be are linearly correlated and are higher in suspended sediments derived from no-till subbasins than those derived from conventionally tilled subbasins. A suspended sediment plume, identified by its unique radionuclide signature, was traced through 17 km of OWC stream channel in approximately 13.4 h (0.35 m/s). The downstream exponential decrease of 7Be activities in suspended sediments 3 to 12 h after passage of the sediment plume was used to estimate transport distances of suspended sediment from 2 to 17 km, respectively. Transport distances of suspended sediments were also calculated from wave kinematics and indicate that at OWC suspended sediment transport distances were longer in streams draining areas of no-till (19-26 km) than in the streams draining areas of conventional tillage (6-15 km). Suspended sediments travel 7 to 22 km at RC. The transport distances are long relative to the lengths of the stream channel and indicate that erosion control methods implemented in the watershed should be reflected quickly in downstream waters.