迎接地震观测技术的新变革

回顾了地震观测技术发展的三个阶段及其特点。简要总结了随着这几个阶段的技术进步南京基准地震台观测技术的重要变革 ,并从记录地震事件数量、大地震速报作用和推动某些研究的深入等方面评估了由于这些技术进步所带来的地震台效能的提高。对目前地震观测技术从模拟观测向数字观测的转折时期 ,地震台如何尽快过渡 ,充分发挥效能提出了初步对策。     

Removal of Cu(II) from aqueous solution in a fluidized-bed reactor

In this study, a fluidized-bed reactor (FBR) was employed to treat copper-containing wastewater by mean of copper precipitation on the surface of sand grains. The conditions for optimum copper removal efficiency were also investigated. This technology was controlled so as to keep supersaturation low to induce the nucleated precipitation of copper coating on the sand surface in an FBR. The effects of relevant parameters, such as the pH value, the molar ratio of [C(T)] to [Cu(2+)], hydraulic loading and the types of chemical reagents used, were examined. The experimental results indicated that 96% copper removal efficiency could be achieved when the influent copper concentration was 10mg l(-1). The optimum chemical reagent was Na(2)CO(3); the molar ratio of [C(T)]/[Cu(2+)] was 2, and the optimal hydraulic loading was not be more than 25m h(-1). In addition, preventing homogeneous nucleation in the FBR was an important operation parameter. Homogeneous nucleation and molecular growth would lead to undesirable microparticle formation in the effluent. A good mixture of carbonate and copper in the presence of sand grains could reduce the level of homogeneous nucleation in the bottom of the reactor. Energy dispersive analysis (EDS) of X-rays provided insight into the copper coating on the sand surface, and element analysis indicated the weight percentages of CuCO(3) and Cu(OH)(2) in precipitate.     

Organotin contamination in fishes with different living patterns and its implications for human health risk in Taiwan

Contaminated levels of butyl- and phenyltin compounds, tributyltin (TBT), dibutyltin (DBT), monobutyltin (MBT), triphenyltin (TPT), diphenlytin (DPT), and monophenyltin (MPT), were investigated in pelagic, demersal and cultured fish species from different seasons and locations in Taiwan. Seasonal variations were found in fishes from Wuchi and Hsingta fishing harbors for their butyltin levels (winter>summer) with the opposite trend for phenyltins in fishes from Patoutzu fishing harbor and demersal fishes from four fishing harbors (summer>winter). Fish liver contained the lowest percentage of TBT and the highest percentage of TPT among six organotin compounds. Consumption of contaminated pelagic species and fishes from Hsingta fishing harbor had the highest hazard index. However, the hazard quotients and hazard indices were all less than 1, suggesting a daily exposure at these levels of TBT, DBT and TPT may not be likely to cause any deleterious effects during lifetime in human population.     

Profiles of PAH emission from steel and iron industries

In order to characterize the polycyclic aromatic hydrocarbons (PAHs) emission from steel and iron industries, this study measured the stack emission of twelve steel and iron plants in southern Taiwan to construct a set of source fingerprints. The study sampled the emissions by the USEPA's sampling method 5 with the modification of Graseby for the gas and particulate phase PAH and, then, used Hewlett-Packard 5890 gas chromatograph equipped with mass spectrometer detector to analyze the samples. The steel and iron industries are classified into three categories on the basis of auxiliary energy source: Category I uses coal as fuel, Category II uses heavy oil as fuel and Category III uses electric arc furnace. The pollution source profiles are obtained by averaging the ratios of individual PAH concentrations to the total concentration of 21 PAHs and total particulate matter measured in this study. Results of the study show that low molecular weight PAHs are predominant in gas plus particulate phase for all three categories. For particulate phase PAHs, however, the contribution of large molecular weight compounds increases. Two-ring PAHs account for the majority of the mass, varying from 84% to 92% with an average of 89%. The mass fractions of 3-, 4-, 5-, 6-ring PAHs in Category I are found to be more than those of the other two categories. The mass of Category III is dominated by 7-ring PAHs. Large (or heavy) molecular weight PAHs (HMW PAHs) are carcinogenic. Over all categories, these compounds are less than 1% of the total-PAH mass on the average. The indicatory PAHs are benz[a]anthracene, benzo[k]fluoranthene, benzo[ghi]perylene for Category I, benzo[a]pyrene, acenaphthene, acenaphthylene for Category II and coronene, pyrene, benzo[b]chrycene for Category III. The indicatory PAHs among categories are very different. Thus, dividing steel and iron industry into categories by auxiliary fuel is to increase the precision of estimation by a receptor model. Average total-PAH emission factors for coal, heavy oil and electric arc furnace were 4050 μg/kg-coal, 5750 μg/l-oil, 2620 μg/kW h, respectively. Carcinogenic benzo[a]pyrene for gas plus particulate phase was 2.0 g/kg-coal, 2.4 μg/l-oil and 1.4 μg/kW h for Category I, II and III, respectively.     

Intrauterine intervention in a case of recurrent meconium peritonitis

We present a case of recurrent meconium peritonitis detected in the second trimester and treated by intrauterine intervention. Antenatal ultrasound findings included fetal ascites and intra-abdominal calcification. Aspiration of fetal ascites under ultrasound guidance and determination of the bilirubin concentration established the diagnosis of meconium peritonitis. Paracentesis was repeated to remove irritating intestinal contents and to decrease pressure on the fetal thorax. Although the exact cause of the meconium peritonitis remains unknown, the recurrence of the condition suggests a genetic basis. A possibility of cystic fibrosis was not considered because the clinical picture did not suggest it. Intrauterine intervention helped to establish the diagnosis of meconium peritonitis and may have contributed to the good outcome.     

污泥生物处理技术在长江大保护中的应用前景

污泥是污水处理的副产物,是污水处理过程的延续和必然要求.截至2017年,长江经济带11省市污泥产量接近2 000×104 t/a,大量污泥没有得到妥善处置,严重制约着“长江水质根本好转”目标的实现.厌氧消化与好氧发酵是两种主流的污泥生物处理技术,都已有广泛的应用案例,但是也存在运营不畅的现象.为识别长江大保护中污泥生物处理项目的问题并提出解决方案,分析了长江经济带的污泥产率及性质,梳理了污泥生物处理技术的发展及适用性.结果表明:长江经济带各省市污泥产量约占全国污泥产量的40%,污泥产率普遍低于全国平均水平,长江经济带各省市污泥有机质含量低于55%,pH为中性、总养分含量超过5.0%、重金属含量存在超过GB 4284—2018《农用污泥污染物控制标准》标准限值的风险;高级厌氧消化、协同厌氧消化和高含固厌氧消化等技术的发展破解了由于长江经济带污泥有机质含量普遍较低而导致的污泥厌氧消化稳定性低的问题,降低了污泥厌氧消化工程的成本;污泥好氧发酵过程重金属钝化技术的发展在一定程度上破解了由于长江经济带污泥重金属含量过高而导致的污泥发酵产物出路不畅的问题.研究显示,污泥生物处理技术仍具有一定的局限性,但通过合适的规划,污泥生物处理技术可与其他污泥处理处置技术高效耦合,具有广泛应用于长江大保护污泥处理处置项目的潜力.      

1961—2010年新疆生长季节指数时空变化特征及其农业响应

在定义生长季节长度(GSL)、生长季节开始时间(LSF)以及生长季节结束时间(FFF)三个生长季节指数的基础上,采用模糊聚类、稳健回归及Mann-Kendall非参数检验等方法分析新疆1961—2010年生长季节指数时空变化特征,并针对作物生长季节指数变化对区域农业生产的影响进行了深入探讨。结果表明:新疆20世纪90年代中期,GSL变化幅度很大,低纬地区生长季节受低温影响较小,而随纬度上升,中高纬地区生长季节受低温影响越大。生长季节长度的变化与秋季低温(生长季节结束时间)变化情况紧密相连,全疆生长季节长度在80%的保证率下,较多年平均生长季节长度缩短5~14 d。生长季节长度的延长,会导致净初级生产力以及年蒸散发总量上升,继而影响水文、生态系统以及生物地球化学过程。     

Optimal nonpoint source pollution control strategies for a reservoir watershed in Taiwan

The purpose of this study is to develop a model for optimal nonpoint source pollution control for the Fei-Tsui Reservoir watershed in Northern Taiwan. Several structural best management practices (BMPs) are selected to treat stormwater runoff. The complete model consists of two interacting components: an optimization model based on discrete differential dynamic programming (DDDP) and a zero-dimensional reservoir water quality model. A predefined procedure is used to locate suitable sites for construction of various selected BMPs in the watershed. In the optimization model, the objective function is to find the best combination of BMP type and placement, which minimizes the total construction and operation, maintenance, and repair (OMR) costs of the BMPs. The constraints are the water quality standards for total phosphorus (TP) and total suspended solids (TSS) concentrations in the reservoir. A zero-dimensional reservoir water quality model of the Vollenweider type is embedded in the optimization framework to simulate pollutant concentrations in Fei-Tsui Reservoir. The resulting optimal cost and benefit of water quality improvement are depicted by the model-derived trade-off curves. The modeling framework developed in the present study could be used as an efficient tool for planning a watershed-wide implementation of BMPs for mitigating stormwater pollution impact on the receiving water bodies.