Evaluation of enterovirus recovery in surface water by different adsorption and elution procedures

The performance of six concentration method combinations and two quantitative analysis techniques were evaluated in terms of enterovirus recovery efficiencies by adjusting the pH and salt concentration of water samples. Of the six concentration method combinations, adsorption on nitrocellulose membranes followed by an acid rinse elution consistently gave the highest recovery efficiencies. In theory, an electropositive membrane should be the most appropriate technique for adsorption of electronegative viruses in pure water. However, it displayed the greatest loss in natural waters. For adsorption and elution procedures, both the electronegative membrane, accompanied by an acid rinse step, and the electropositive membrane, accompanied by a glycine rinse step, provided higher recovery efficiencies. MPN-RT-PCR, a statistically quantitative analysis method, performed more efficiently, in economic terms, but had a similar enterovirus recovery trend to real-time RT-PCR, which is the authoritative quantitative analysis method for nucleic acid.     

Estimation of acceptable mercury intake from fish in Taiwan

The US Food and Drug Administration (USFDA) and Environmental Protection Agency (USEPA) are advising women and young children to avoid eating fish that contain high levels of mercury (Hg). However in Taiwan, the annual Black Fin Tuna Festival encourages the public to consume fish. The aim of this study was to assess fish intake in relation to the health risks of mercury exposure and calculate the acceptable and safe intake of fish in children and women of childbearing age. From the Monte Carlo simulation, based on USEPA's reference dose (0.1 microgkg(-1)d(-1)), we found that 21.6%-24.3% and 45.6%-57.4% of the daily mercury dose estimates exceeded the reference dose for typical and high-seafood consumers. The acceptable ingestion rates are <50 g d(-1) (children) and 90.8 +/- 15.7 g d(-1) (women of childbearing). Sensitivity analysis suggests that Hg concentration in fish may be a key parameter to aid governments as they offer guidance for risk management.     

Sizing an Off-stream Reservoir with Respect to Water Availability,Water Quality,and Biological Integrity

Sizing a new reservoir is a challenging task, which normally requires simultaneously a cost-effective, risk-informed, and forward-looking decision analysis with respect to basin-wide hydrological features, environmental quality, and biological integrity. Such a sustainable planning approach takes into account the global trend to balance the needs of economic growth, ecological conservation, and environmental protection. To achieve the goal of sustainability, emphasis in this paper was placed upon the correlation of three physical, chemical, and biological indices, including the dissolved oxygen (DO), the 5-day biochemical oxygen demand (BOD₅), and the index of biotic integrity (IBI), for the optimal planning of a reservoir in a river basin. This new methodological paradigm has been employed for sizing an off-stream reservoir in the Hou-Lung River Basin, central Taiwan. The internal linkage between the water quality parameters (DO and BOD₅) and the IBI levels further enables us to formulate a special biotic integrity constraint which reflects fish community attributes to suit a relatively low-density and unspecialized freshwater fish fauna in response to the changing water quality conditions in the river basin. The tradeoffs among economic, environmental, and ecological aspects for reservoir sizing can then be based on the river flow patterns, the water demand, the water quality standards, and the anticipated biological integrity in some critical river reaches. Findings in a preliminary case study suggest that an optimal pumping scheme may be smoothly maintained on a yearly basis within a combined multicriteria and multiobjective decision-making process.     

Intensive water quality monitoring in a Taiwan bathing beach

A total of 357 water samples were collected from a public beach in northern Taiwan during beach season, and the densities of enterococci were analyzed by Enterolert methods. The mean enterococci level was 356 MPN/100 ml and ranged from <10 to 2,005 MPN/100 ml, which was classified as high contamination level according to the WHO water quality guideline (95 percentile >1,000 MPN/100 ml). Most of the deteriorated water quality conditions occurred during rainfall. By excluding data from the rain days, the overall beach water quality would be considered in the moderate contamination level (95 percentile 200-1,000 MPN/100 ml). Among the selected microbiological parameters tested, the densities of total coliforms and enterococci exhibited the highest correlation (r = 0.449, p = 0.009), followed by the concentrations of total coliforms and fecal coliforms (r = 0.403, p = 0.02). Nonetheless, no significant correlation was found between enterococci and fecal coliform levels (r = 0.197, p = 0.271).     

Evaluation and improvement of air quality in school public elevator

Public elevators are an essential requirement in modern high-rise buildings. However, the confined, crowded interior of an elevator provides an ideal breeding ground for all manners of biological aerosols. Consequently, when using an elevator at a university in Taiwan as the research target, this study performs an experimental investigation into the effectiveness of hand-sprayed gaseous chlorine dioxide as a disinfection agent. The air quality before and after disinfection is evaluated by measuring the bioaerosol concentrations of bacteria and fungi, respectively. The average background levels of bacteria and fungi before disinfection are found to be 635.7?±?469.6 and 1296.8?±?966.6 colony-forming unit (CFU)/m³, respectively. Following disinfection, the bacteria and fungi concentrations reduced by an average of 35 and 25 %, respectively. The multivariate analysis of variance (MANOVA) results showed that the residual bacteria and fungi concentration levels were determined primarily by the number of individuals within the elevator and the elapsed time following disinfection. In general, the present results show that given a maximum of five individuals within the elevator, a disinfection schedule of once every 40 min is sufficient to reduce the bioaerosol concentrations of bacteria and fungi to the levels specified by the Taiwan Environmental Protection Agency (EPA).     

Emission characteristics of VOCs from three fixed-roof p-xylene liquid storage tanks

This study evaluates emission characteristics of volatile organic compounds (VOCs) caused by standing loss (L _S) and working loss (L _W) of three vertical fixed-roof p-xylene (p-X) liquid tanks during 1-year storage and filling operation. The annual net throughput of the tanks reached 70,446 t, resulting in 9,425 kg of p-X vapor emission including 5,046 kg of L _S (53.54 %) and 4,379 kg of L _W (46.46 %). The estimated L _W of AP-42 displayed better agreement with the measured values of a VOC detector than the estimated L _S of AP-42. The L _S was best correlated with the liquid height of the tanks, while the L _W was best correlated with the net throughput of the tanks. As a result, decreasing vapor space volume of the tanks and avoiding high net throughput of the tanks in a high ambient temperature period were considered as effective means to lessen VOC emission from the fixed-roof organic liquid storage tank.     

Selection of infectious medical waste disposal firms by using the analytic hierarchy process and sensitivity analysis

While Taiwanese hospitals dispose of large amounts of medical waste to ensure sanitation and personal hygiene, doing so inefficiently creates potential environmental hazards and increases operational expenses. However, hospitals lack objective criteria to select the most appropriate waste disposal firm and evaluate its performance, instead relying on their own subjective judgment and previous experiences. Therefore, this work presents an analytic hierarchy process (AHP) method to objectively select medical waste disposal firms based on the results of interviews with experts in the field, thus reducing overhead costs and enhancing medical waste management. An appropriate weight criterion based on AHP is derived to assess the effectiveness of medical waste disposal firms. The proposed AHP-based method offers a more efficient and precise means of selecting medical waste firms than subjective assessment methods do, thus reducing the potential risks for hospitals. Analysis results indicate that the medical sector selects the most appropriate infectious medical waste disposal firm based on the following rank: matching degree, contractor's qualifications, contractor's service capability, contractor's equipment and economic factors. By providing hospitals with an effective means of evaluating medical waste disposal firms, the proposed AHP method can reduce overhead costs and enable medical waste management to understand the market demand in the health sector. Moreover, performed through use of Expert Choice software, sensitivity analysis can survey the criterion weight of the degree of influence with an alternative hierarchy.     

Volatile organic compound emissions from wastewater treatment plants in Taiwan: legal regulations and costs of control

This study assessed volatile organic compound (VOC) emission characteristics from wastewater treatment plants (WWTPs) in five Taiwanese industrial districts engaged in numerous manufacturing processes, including petrochemical, science-based industry (primarily semiconductors, photo-electronics, electronic products and biological technology), as well as multiple manufacturing processes (primarily pharmaceuticals and paint manufacturing). The most aqueous hydrocarbons dissolved in the wastewater of Taiwanese WWTPs were acetone, acrylonitrile, methylene chloride, and chloroform for the petrochemical districts; acetone, chloroform, and toluene for the science-based districts; and chlorinated and aromatic hydrocarbons for the multiple industrial districts. The aqueous pollutants in the united WWTPs were closely related to the characteristics of the manufacturing plants in the districts. To effectively prevent VOC emissions from the primary treatment section of petrochemical WWTPs, the updated regulations governing VOC emissions were issued by the Taiwanese Environmental Protection Administration in September 2005, legally mandating a seal cover system incorporating venting and air purification equipment. Cost analysis indicates that incinerators with regenerative heat recovery are optimal for treating high VOC concentrations, exceeding 10,000ppm as CH(4), from the oil separation basins. However, the emission concentrations, ranging from 100 to 1000ppm as CH(4) from the other primary treatment facilities and bio-treatment stages, should be collected and then injected into the biological oxidation basins via existing or new blowers. The additional capital and operating costs required to treat the VOC emissions of 1000ppm as CH(4) from primary treatment facilities are less than US$0.1 for perm(3) wastewater treatment capacity.     

Evaluation of the multiple-ion competition in the adsorption of As(V) onto reclaimed iron-oxide coated sands by fractional factorial design

This study describes the competitive effects of selected ions and natural organic matter on As(V) removal using reclaimed iron-oxide coated sands (RIOCS) in the single- and multi-ion systems. A 2(7-3) factional factorial experimental design (FFD) was employed for screening main competitive factors in this adsorption process. As a result, the inhibitive competition effects of the anions on As(V) removal in the single ion system were in the following sequence: PO(4)(3-)>SiO(3)(2-)>HCO(3)(-)>humic acid (HA)>SO(4)(2-)>Cl(-), whereas the cation Ca(2+) was observed to enhance the As(V) removal. In addition, the optimum initial pH for As(V) removal in single-ion system was 5. Based on the estimates of major effects and interactions from the FFD, PO(4)(3-), SiO(3)(2-), Ca(2+) and HA were important factors on As(V) removal in the multi-ion system. The promoters for the As(V) removal were found to be Ca(2+) and, to a lesser extent, SO(4)(2-). The competitive effects of these ions on As(V) removal were in the order of PO(4)(3-), SiO(3)(2-), HA, HCO(3)(-), and Cl(-). In the single ion system, the efficiencies of As(V) removal range from 75% to 96%, much higher than those in the multi-ion system (44%) at the initial pH 5. Clearly, there were some complex anion interactions in the multi-ion system. To promote the removal of As(V) by RIOCS, it is proposed to lower the pH in the single-ion system, while in the multi-ion system, the increase of the Ca(2+) concentration, or decreases of PO(4)(3-), SiO(3)(2-) and HA concentrations is suggested.