The adsorptive capacity of vapor-phase mercury chloride onto powdered activated carbon derived from waste tires

Injection of powdered activated carbon (PAC) upstream of particulate removal devices (such as electrostatic precipitator and baghouses) has been used effectively to remove hazardous air pollutants, particularly mercury-containing pollutants, emitted from combustors and incinerators. Compared with commercial PACs (CPACs), an alternative PAC derived from waste tires (WPAC) was prepared for this study. The equilibrium adsorptive capacity of mercury chloride (HgCl2) vapor onto the WPAC was further evaluated with a self-designed bench-scale adsorption column system. The adsorption temperatures investigated in the adsorption column were controlled at 25 and 150 degrees C. The superficial velocity and residence time of the flow were 0.01 m/sec and 4 sec, respectively. The adsorption column tests were run under nitrogen gas flow. Experimental results showed that WPAC with higher Brunauer-Emmett-Teller (BET) surface area could adsorb more HgCl2 at room temperature. The equilibrium adsorptive capacity of HgCl2 for WPAC measured in this study was 1.49 x 10(-1) mg HgCl2/g PAC at 25 degrees C with an initial HgCI2 concentration of 25 microg/m3. With the increase of adsorption temperature < or = 150 degrees C, the equilibrium adsorptive capacity of HgCl2 for WPAC was decreased to 1.34 x 10(-1) mg HgCl2/g PAC. Furthermore, WPAC with higher sulfur contents could adsorb even more HgCl2 because of the reactions between sulfur and Hg2+ at 150 degrees C. It was demonstrated that the mechanisms for adsorbing HgCl2 onto WPAC were physical adsorption and chemisorption at 25 and 150 degrees C, respectively. Experimental results also indicated that the apparent overall driving force model appeared to have the good correlation with correlation coefficients (r) > 0.998 for HgCl2 adsorption at 25 and 150 degrees C. Moreover, the equilibrium adsorptive capacity of HgCl2 for virgin WPAC was similar to that for CPAC at 25 degrees C, whereas it was slightly higher for sulfurized WPAC than for CPAC at 150 degrees C.     

Atmospheric lead concentration distribution in Northern Taiwan

Atmospheric lead concentrations were measured randomly, approximately once per week, at five traffic sites in northern Taiwan from September 1994 to May 1995. Three types of theoretical distributions, lognormal, Weibull and gamma were selected to fit the frequency distribution of the measured lead concentration. Four goodness-of-fit criteria were used to judge which theoretical distribution is the most appropriate to represent the frequency distributions of atmospheric lead.The results show that atmospheric lead concentrations in total suspended particulates fit the lognormal distribution reasonably well in northern Taiwan. The intervals of fitted theoretical cumulative frequency distributions (CFDs) can successfully contain the measured data when the population mean is estimated with a 95% confidence interval. In addition, atmospheric lead concentration exceeding a critical concentration is also predicted from the fitted theoretical CFDs.     

Development of nutrient cycle through agricultural activities of a rural area in the North of Vietnam

Material flow analysis (MFA) has been applied to assess the environmental impact of human activities on nutrient flows at the commune scale. This paper reports the assessment of human excreta and animal manure as a nutrient source for paddy fields and fishponds in Hoang Tay commune, Ha Nam province, Vietnam. The quality of MFA model was confirmed through modified uncertainty analysis, then was used to originally quantify and visualize the interlinks of livestock with the environmental sanitation and agricultural system in terms of nutrients. Currently, half of the pig manure was collected to the biogas, and the remainders were freely discharged to the commune’s drainage system (25%) or directly reused in the paddy fields (25%). While wastewater in the drainage system was the biggest source of nitrogen (contributed 46%), paddy field was the biggest source of phosphorous (contributed 55%) discharged to the Nhue River, totaling 57 ± 9 ton N and 29 ± 6 ton P, annually. Consequently, mitigation measures for nutrient resource management were proposed, and reducing half of chemical fertilizers applied and reusing all excreta and manure in the paddy fields were the most effective option.     

Comparison of the physical and chemical characteristics of fine road dust at different urban sites

The size distribution and chemical components of a fine fraction (<2.5 μm) of road dust collected at urban sites in Korea (Gwangju) and Mongolia (Ulaanbaatar) where distinct urban characteristics exist were measured. A clear bimodal size distribution was observed for the resuspended fine road dust at the urban sites in Korea. The first mode peaked at 100–110 nm, and the second peak was observed at 435–570 nm. Ultrafine mode (~30 nm) was found for the fine road dust at the Mongolia site, which was significantly affected by residential coal/biomass burning. The contribution of the water-soluble ions to the fine road dust was higher at the sites in Mongolia (15.8–16.8%) than at those in Korea (1.2–4.8%). Sulfate and chloride were the most dominant ionic species for the fine road dust in Mongolia. As (arsenic) was also much higher for the Mongolian road dust than the others. The sulfate, chloride, and As mainly come from coal burning activity, suggesting that coal and biomass combustion in Mongolia during the heating season should affect the size and chemical components of the fine road dust. Cu (copper) and Zn (zinc), carbonaceous particles (organic carbon [OC] and elemental carbon [EC]) increased at sites in Korea, suggesting that the fine road dust at these sites was significantly affected by the high volume of traffic (engine emission and brake/tire wear). Our results suggest that chemical profiles for road dust specific to certain sites should be applied to more accurately apportion road dust source contributing to the ambient particulate matter.

Implications: Size and chemical characteristics of fine road dust at sites having distinct urban characteristics were examined. Residential coal and biomass burning and traffic affected physiochemical properties of the fine road dust. Different road dust profiles at different sites should be needed to determine the ambient PM2.5 sources more accurately.     

Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material

3D printing has received lots of attention due to its limitless potential and advantages in comparison to traditional manufacturing processes. This study focuses on the most popular type of home 3D printers, namely fused filament fabrication (FFF) printers, which use plastic filaments as the feedstock. The rather high material cost and large amount of plastic waste generated by FFF 3D printers have driven the need for plastic filaments produced from recycled plastic waste. This study evaluates, in terms of physical characterization, the feasibility of using recycled high-density polyethylene (HDPE), one of the most commonly used plastics, as the feedstock for 3D printers, in comparison with the common acrylonitrile butadiene styrene plastic pellets. In-house extrusion using recycled HDPE pellets and flakes is possible. The diameter consistency and extrusion rate results, along with other physical characterization results, including differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, Raman spectroscopy, and water absorption, suggest that making filaments from recycled HDPE pellets is a viable option, as the obtained filament has favorable water rejection and comparable extrusion rate and thermal stability. Existing methods for overcoming the warping and adhesion problems in 3D printing with HDPE were also reviewed. In order to increase the market competitiveness of waste-derived filaments, optimization of the extrusion process, studies on the mechanical and aging properties, and development of a standard characterization methodology and database are crucial.     

A new joint publication

Special FeatureWaste Management Research in Korea

A new joint publication     

Relationship of urinary arsenic metabolites to intake estimates in residents of the Red River Delta, Vietnam

This study investigated the status of arsenic (As) exposure from groundwater and rice, and its methylation capacity in residents from the Red River Delta, Vietnam. Arsenic levels in groundwater ranged from <1.8 to 486 μg/L. Remarkably, 86% of groundwater samples exceeded WHO drinking water guideline of 10 μg/L. Also, estimated inorganic As intake from groundwater and rice were over Provisional Tolerable Weekly Intake (15 μg/week/kg body wt.) by FAO/WHO for 92% of the residents examined. Inorganic As and its metabolite (monomethylarsonic acid and dimethylarsinic acid) concentrations in human urine were positively correlated with estimated inorganic As intake. These results suggest that residents in these areas are exposed to As through consumption of groundwater and rice, and potential health risk of As is of great concern for these people. Urinary concentration ratios of dimethylarsinic acid to monomethylarsonic acid in children were higher than those in adults, especially among men, indicating greater As methylation capacity in children.     

Uncertainty Reduction of the Flood Stage Forecasting Using Neural Networks Model1

Abstract: The Elman Discrete Recurrent Neural Networks Model (EDRNNM), which is one of the special types of neural networks model, is developed and applied for the flood stage forecasting at the Musung station (No. 1) of the Wi‐stream catchment, which is one of the International Hydrological Program representative basins, Korea. A total of 135 different training patterns, which involve hidden nodes, standardization process, data length, and lead‐time, are selected for the minimization of the architectural uncertainty. The model parameters, such as optimal connection weights and biases, are estimated during the training performance of the EDRNNM, and we apply them to evaluate the validation performance of the EDRNNM. Sensitivity analysis is used to reduce the uncertainty of input data information of the EDRNNM. As the results of sensitivity analysis, the Improved EDRNNM consists of four input nodes resulting from the exclusion of Dongkok station (No.5) in initial five input nodes group of the EDRNNM. The accuracy of flood stage forecasting during the training and validation performances of the Improved EDRNNM remains the same as that of the EDRNNM. The Improved EDRNNM, therefore, gives highly reliable flood stage forecasting. The best optimal EDRNNM, so called the Improved EDRNNM, is determined by elimination of the uncertainties of architectural and input data information in this study. Consequently, we can avoid unnecessary data collection and operate the flood stage forecasting system economically.     

Ozonation of oxytetracycline and toxicological assessment of its oxidation by-products

Antibiotic formulation effluents are well known for their difficult elimination by traditional bio-treatment methods and their important contribution to environmental pollution due to its fluctuating and recalcitrant nature. In the present study the effect of ozonation on the degradation of oxytetracycline (OTC) aqueous solution (100mgl(-1)) at different pH values (3, 7 and 11) was investigated. Ozone (11mgl(-1) corresponds the concentration of ozone in gas phase) was chosen considering its rapid reaction and decomposition rate. The concentration of oxytetracycline, chemical oxygen demand (COD), biochemical oxygen demand (BOD) and BOD5/COD ratio were the parameters to evaluate the efficiency of the ozonation process. In addition, the toxic potential of the OTC degradation was investigated by the bioluminescence test using the LUMIStox 300 instrument and results were expressed as the percentage inhibition of the luminescence of the marine bacteria Vibrio fischeri. The results demonstrate that ozonation as a partial step of a combined treatment concept is a potential technique for biodegradability enhancement of effluents from pharmaceutical industries containing high concentration of oxytetracycline provided that the appropriate ozonation period is selected. At pH 11 and after 60min of ozonation of oxytetracycline aqueous solutions (100 and 200mgl(-1)) the BOD5/COD ratios were 0.69 and 0.52, respectively. It was also shown that COD removal rates increase with increasing pH as a consequence of enhanced ozone decomposition rates at elevated pH values. The results of bioluminescence data indicate that first by-products after partial ozonation (5-30min) of OTC were more toxic than the parent compound.     

A novel sustainable decision making model for municipal solid waste management

This paper reviews several models developed to support decision making in municipal solid waste management (MSWM). The concepts underlying sustainable MSWM models can be divided into two categories: one incorporates social factors into decision making methods, and the other includes public participation in the decision-making process. The public is only apprised or takes part in discussion, and has little effect on decision making in most research efforts. Few studies have considered public participation in the decision-making process, and the methods have sought to strike a compromise between concerned criteria, not between stakeholders. However, the source of the conflict arises from the stakeholders' complex web of value. Such conflict affects the feasibility of implementing any decision. The purpose of this study is to develop a sustainable decision making model for MSWM to overcome these shortcomings. The proposed model combines multicriteria decision making (MCDM) and a consensus analysis model (CAM). The CAM is built up to aid in decision-making when MCDM methods are utilized and, subsequently, a novel sustainable decision making model for MSWM is developed. The main feature of CAM is the assessment of the degree of consensus between stakeholders for particular alternatives. A case study for food waste management in Taiwan is presented to demonstrate the practicality of this model.