Effect of liquid-to-solid ratio on semi-solid Fenton process in hazardous solid waste detoxication

The liquid-to-solid ratio (L/S) of semi-solid Fenton process (SSFP) designated for hazardous solid waste detoxication was investigated. The removal and minimization effects of o-nitroaniline (ONA) in simulate solid waste residue (SSWR) from organic arsenic industry was evaluated by total organic carbon (TOC) and ONA removal efficiency, respectively. Initially, Box-Behnken design (BBD) and response surface methodology (RSM) were used to optimize the key factors of SSFP. Results showed that the removal rates of TOC and ONA decreased as L/S increased. Subsequently, four target initial ONA concentrations including 100 mg kg⁻¹, 1 g kg⁻¹, 10 g kg⁻¹, and 100 g kg⁻¹ on a dry basis were evaluated for the effect of L/S. A significant cubic empirical model between the initial ONA concentration and L/S was successfully developed to predict the optimal L/S for given initial ONA concentration for SSFP. Moreover, an optimized operation strategy of multi-SSFP for different cases was determined based on the residual target pollutant concentration and the corresponding environmental conditions. It showed that the total L/S of multi-SSFP in all tested scenarios was no greater than 3.8, which is lower than the conventional slurry systems (L/S ? 5). The multi-SSFP is environment-friendly when it used for detoxication of hazardous solid waste contaminated by ONA and provides a potential method for the detoxication of hazardous solid waste contaminated by organics.     

Synergistic toxic effect of nano-Al2O3 and As(V) on Ceriodaphnia dubia

Engineered nanomaterials (ENMs) alone could negatively impact the environment and human health. However, their role in the presence of other toxic substances is not well understood. The toxicity of nano-Al(2)O(3), inorganic As(V), and a combination of both was examined with C. dubia as the model organisms. Bare nano-Al(2)O(3) particles exhibited partial mortality at concentrations of greater than 200mg/L. When As(V) was also present, a significant amount of As(V) was accumulated on the nano-Al(2)O(3) surface, and the calculated LC(50) of As(V) in the presence of nano-Al(2)O(3) was lower than that it was without the nano-Al(2)O(3). The adsorption of As(V) on the nano-Al(2)O(3) surface and the uptake of nano-Al(2)O(3) by C. dubia were both verified. Therefore, the uptake of As(V)-loaded nano-Al(2)O(3) was a major reason for the enhanced toxic effect.     

Reprint of: Concentrations, distribution, and bioaccumulation of synthetic musks in the Haihe River of China

Seven typical synthetic musks (SMs) in the samples from the surface water, sediment and fish of the Haihe River were measured. The SM concentrations in the sediment and surface water of the Haihe River were significantly lower than those in the Dagu Drainage River and Chentaizi Drainage River (p < 0.05). Along the flow direction, the SM concentrations in surface water and sediment tended to increase from the upstream to the downstream of Dagu Drainage River. The Bioaccumulation factors (BAFs) of galaxolide (HHCB) and tonalide (AHTN) were calculated at high levels in the muscles of crucian carp, common carp, and silver carp. Most of the biota-sediment accumulation factors (BSAFs) for HHCB and AHTN were higher than 1.7, suggesting magnification possibly exist in the musk bioaccumulations of the three fishes in the Haihe River. No significant differences in HHCB/AHTN ratios were observed among the water, fish, and sediment samples (p > 0.05). However, the HHCB/AHTN values in the Haihe River were much lower than those in the Dagu Drainage River and Chentaizi Drainage River (p < 0.05). Compared with several typical persistent organic pollutants (POPs), the musk concentrations were higher or comparable in the Haihe River.     

Bioanalytical and instrumental analysis of thyroid hormone disrupting compounds in water sources along the Yangtze River

Thyroid hormone (TH) agonist and antagonist activities of water sources along the Yangtze River in China were surveyed by a green monkey kidney fibroblast (CV-1) cell-based TH reporter gene assay. Instrumental analysis was conducted to identify the responsible thyroid-active compounds. Instrumentally derived l-3,5,3′-triiodothyronine (T₃) equivalents (T₃-EQs) and thyroid receptor (TR) antagonist activity equivalents referring to dibutyl phthalate (DBP-EQs) were calculated from the concentrations of individual congeners. The reporter gene assay demonstrated that three out of eleven water sources contained TR agonist activity equivalents (TR-EQs), ranging from 286 to 293 ng T₃/L. Anti-thyroid hormone activities were found in all water sources with the TR antagonist activity equivalents referring to DBP (Ant-TR-EQs), ranging from 51.5 to 555.3 μg/L. Comparisons of the equivalents from instrumental and biological assays suggested that high concentrations of DBP and di-2-ethylhexyl phthalate (DEHP) were responsible for the observed TR antagonist activities at some locations along the Yangtze River.     

钛基IrO2-SnO2电极在烟气海水脱硫恢复系统中的应用

采用浸渍-热分解法制备了含IrOx-TiO2中间层的IrO2-SnO2电极,得到的电极具有较高的析氯电催化活性和较强的稳定性,并通过电化学氧化法对Na2SO3海水脱硫模拟液进行处理,考察了电流密度、温度、pH值和电解时间等电解工艺参数对Na2SO3去除率和化学需氧量COD的影响。结果表明,在电流密度为200 mA/cm^2,pH值为3.5,电解440 mg/L的Na2SO3海水脱硫模拟液,15 min时Na2SO3去除率可达96.5%,COD去除率可达82.6%。     

MFC强化同步短程硝化反硝化工艺的启动

微生物燃料电池(MFC)可在阴极实现反硝化、短程反硝化和同步硝化反硝化并产生电能,但在MFC阴极实现同步短程硝化反硝化的研究尚未见到报道。为了探讨MFC阴极同步短程硝化反硝化工艺的性能,将双室曝气阴极MFC与A/O脱氮工艺结合处理人工模拟低碳氮比废水。通过静置运行15 d使得MFC阴极室亚硝态氮得以积累,氨氧化菌得以富集。随即改为连续运行后第21天成功启动同步短程硝化反硝化MFC;阴极出水氨氮浓度为0.3 mg/L,亚硝态氮浓度为15.9 mg/L,硝态氮浓度为0.6 mg/L,亚硝化率达到95%以上,阴极电极自养反硝化去除率达到50%以上,COD去除率达到85%以上。结果表明,将MFC与同步短程硝化反硝化工艺结合,通过阴极室中氧气得电子获得高p H,可以强化同步短程硝化反硝化工艺,完成生物脱氮的同时回收电能,并具有减少外加碱度的优势。     

羟基磷灰石的制备及其对水中氟离子的吸附

本研究利用红外光谱(FTIR)、扫描电镜(SEM)和X射线粉末衍射(XRD)观察了共沉淀法合成羟基磷灰石(HAP)的形貌及其晶型结构,并探讨了Ca/P摩尔比、反应时间及反应温度等因素对羟基磷灰石吸附水中氟离子性能的影响。结果表明,n(Ca/P)=1.5/1、反应时间1 h、反应温度40℃、陈化时间48 h、煅烧温度200℃、煅烧时间2 h时,HAP除氟效果最佳,吸附效率和吸附容量分别达到68.8%和6.88 mg/g。实验数据Langmuir等温模式拟合效果优于Freundlich模式,热力学参数计算可知,HAP对氟离子的吸附是自发(ΔG00),吸热(ΔH00),熵增(ΔS00)的过程。HAP对氟离子的吸附符合拟二级反应动力学过程。     

γ-Al2O3负载多金属复合催化剂选择性催化还原烟气脱硝

以γ-Al₂O₃作为载体,先后负载CeO₂,MnC₂O₄,Fe（NO₃）₃,CrO₃,Ni（NO₃）₂,NH₄VO₃等多种金属组分制备γ-Al₂O₃负载多金属复合催化剂,并用于模拟烟气的选择性催化还原脱硝。通过SEM和XRD技术对催化剂进行了表征。表征结果显示：Fe,Mn,Cr的添加能增加催化剂的低温催化活性、提高催化剂的N₂选择性;γ-Al₂O₃对活性金属氧化物的负载效果良好。实验结果表明：各金属化合物的最佳加入量为 w（MnC₂O₄·2H₂O）=20%,w（Fe（NO₃）₃·9H₂O）=15%,w（CrO₃）=10%,w（Ni（NO₃）₂·6H₂O）=5%,w（NH₄VO₃）=10%,w（CeO₂）=5%,w（γ-Al₂O₃）=35%;以在最佳正交实验条件下制得的γ-Al₂O₃负载多金属复合物为催化剂,在脱硝反应温度为205 ℃的条件下,NO转化率为96.7%;γ-Al₂O₃负载多金属复合催化剂经5次重复使用,NO转化率仍可稳定在94%左右。     

Detection of tritium sorption on four soil materials

In order to measure groundwater age and design nuclear waste disposal sites, it is important to understand the sorption behavior of tritium on soils. In this study, batch tests were carried out using four soils from China: silty clays from An County and Jiangyou County in Sichuan Province, both of which could be considered candidate sites for Very Low Level Waste disposal; silty sand from Beijing; and loess from Yuci County in Shanxi Province, a typical Chinese loess region. The experimental results indicated that in these soil media, the distribution coefficient of tritium is slightly influenced by adsorption time, water/solid ratio, initial tritium specific activity, pH, and the content of humic and fulvic acids. The average distribution coefficient from all of these influencing factors was about 0.1-0.2 mL/g for the four types of soil samples. This relatively modest sorption of tritium in soils needs to be considered in fate and transport studies of tritium in the environment.     

压力容器制造监检中对若干问题的处理

针对压力容器制造监检中某些受检单位在法规标准的理解上存在误区或者疏忽、不知如何进行后续整改工作的现状,笔者结合多年压力容器监督检验的工作经验,提出自己的解决方案,以供参考,也希望广大读者在遇到类似情况时能够正确理解并执行相关法规标准.