砖瓦厂氟化物排放研究

砖瓦厂是重要的大气污染源。通过模拟试验和现场测定，研究了制砖中氟的释放与温度的关系，成品砖内氟的残留分布和砖瓦厂氟的无组织排放等，在此基础上提出了砖瓦厂生产中氟的释放率为５４．３％。这些结果对防治砖恒心各氟的污染有参考意义。     

济南市水文地质特征对地下水污染的影响分析

从环境水文地质学的角度出发，对济南市地下水污染的主要途径和方式，以及局部地下水重污染区进行了较为详细的分析，济南市地下水污染以浅层地下水污染为主，局部地区深层地下水也已受到污染，并有进一步加重的趋势，地下水严重超采，造成多处地表塌陷和降落漏斗，并成为济南市地下水的重污染区。     

Progress in quantitative research on the relationship between atmospheric oxidation and air quality

Atmospheric oxidizing capacity (AOC) is an essential driving force of troposphere chemistry and self-cleaning, but the definition of AOC and its quantitative representation remain uncertain. Driven by national demand for air pollution control in recent years, Chinese scholars have carried out studies on theories of atmospheric chemistry and have made considerable progress in AOC research. This paper will give a brief review of these developments. First, AOC indexes were established that represent apparent atmospheric oxidizing ability (AOIe) and potential atmospheric oxidizing ability (AOIp) based on aspects of macrothermodynamics and microdynamics, respectively. A closed study refined the quantitative contributions of heterogeneous chemistry to AOC in Beijing, and these AOC methods were further applied in Beijing-Tianjin-Hebei and key areas across the country. In addition, the detection of ground or vertical profiles for atmospheric OH·, HO₂·, NO₃· radicals and reservoir molecules can now be obtained with domestic instruments in diverse environments. Moreover, laboratory smoke chamber simulations revealed heterogeneous processes involving reactions of O₃ and NO₂, which are typical oxidants in the surface/interface atmosphere, and the evolutionary and budgetary implications of atmospheric oxidants reacting under multispecies, multiphase and multi-interface conditions were obtained. Finally, based on the GRAPES-CUACE adjoint model improved by Chinese scholars, simulations of key substances affecting atmospheric oxidation and secondary organic and inorganic aerosol formation have been optimized. Normalized numerical simulations of AOIe and AOIp were performed, and regional coordination of AOC was adjusted. An optimized plan for controlling O₃ and PM_2.5 was analyzed by scenario simulation.     

Advances in the treatment of multi-pollutant flue gas in China's building materials industry

In most of the world's building material industries, the control of flue gas pollutants mainly focuses on a single pollutant. However, given the large capacity and high contribution of China's building materials industry to global air pollution, the need to develop multi-pollutant emission reduction technology is urgent. Recently, China has focused on reducing the emissions of flue gas pollutants in the building materials industry, established many key research and development projects, and gradually implemented more stringent pollutant emission limits. This project focuses on the most recent advances in flue gas emission control technology in China's building materials industry, including denitration, dust removal, desulfurization, synergistic multi-pollutant emission reduction, and the construction of pilot research and demonstration projects for pollutant removal in several building material industries. On this basis, revised pollutant limits in flue gas emitted in China's building material industry are proposed.     

A review of gas-phase chemical mechanisms commonly used in atmospheric chemistry modelling

The atmospheric chemical mechanism is an essential component of airshed models used for investigating the chemical behaviors and impacts of species. Since the first tropospheric chemical mechanism was proposed in the 1960s, various mechanisms including Master Chemical Mechanism (MCM), Carbon Bond Mechanism (CBM), Statewide Air Pollution Research Center (SAPRC) and Regional Atmospheric Chemistry Mechanism (RACM) have been developed for different research purposes. This work summarizes the development and applications of these mechanisms, introduces their compositions and lumping methods, and compares the ways the mechanisms treat radicals with box model simulations. CBM can reproduce urban pollution events with relatively low cost compared to SAPRC and RACM, whereas the chemical behaviors of radicals and the photochemical production of ozone are described in detail in RACM. The photolysis rates of some oxygenated compounds are low in SAPRC07, which may result in underestimation of radical levels. As an explicit chemical mechanism, MCM describes the chemical processes of primary pollutants and their oxidation products in detail. MCM can be used to investigate certain chemical processes; however, due to its large size, it is rarely used in regional model simulations. A box model case study showed that the chemical behavior of OH and HO₂ radicals and the production of ozone were well described by all mechanisms. CBM and SAPRC underestimated the radical levels for different chemical treatments, leading to low ozone production values in both cases. MCM and RACM are widely used in box model studies, while CBM and SAPRC are often selected in regional simulations.     

天津工业区春夏季VOCs污染特征及精细化来源解析

2021年3—8月,采用热脱附气相色谱质谱法对天津工业区环境空气中109种挥发性有机物（VOCs）进行离线监测,研究了VOCs组成特征、臭氧生成潜势（OFP）及来源,并对工业源进行精细化分析。结果表明：观测期间VOCs浓度为（46.6±19.7）~（136.8±55.7）µg/m³,对VOCs浓度贡献较高的物种是烷烃、卤代烃、含氧挥发性有机物（OVOCs）,烷烃、芳香烃浓度呈中午低、早晚高的日变化趋势,OVOCs反之;OFP贡献占比较大的物种有烷烃、芳香烃、烯烃和OVOCs,烷烃的OFP贡献占比主要受其浓度占比影响,夏季芳香烃、烯烃的OFP贡献占比明显升高,臭氧（O₃）治理应加强二者的排放管控。来源解析显示,春夏季VOCs的主要来源为工业源、溶剂使用源、柴油车尾气排放源、油气挥发源和天然源。工业源精细化分析表明,芳香烃浓度与焦炭、纯碱产量,OVOCs浓度与天然气、乙烯、农用氮磷钾化肥产量,卤代烃浓度与天然气、汽车、农用氮磷钾化肥、纯碱产量,烯烃浓度与发电设备产量均呈正相关,初步判断,本地区环境空气中的芳香烃、OVOCs、卤代烃、烯烃可能来自于以上细分工业企业。

     

A study on Se application for improving the soil in the environment at lower Se level

A result that application of sodium selenite or fly ash to some of soilin loess plateau can increase Se content in wheat grain has been demonstrated by the pot and field experiments, and added Se in soil can last its availability for 3 years. So this is a good measure for improving the low Se soils and preventing the Kaschin-Beck disease.     

Preconcentration and determination of trace copper(II) in natural water using silica gel modified with 1-(2-pyridylazo)-2-naphthol

Trace copper (II) in water can be preconcentrated using silica gel modified with 1-(2-pyridylazo)-2-naphthol (PAN) and be determined spectrophotometri-cally. The conditions for the preconcentration were studied. The method was applied to both artificial and natural water samples and the results suggest that copper (II) of ppb level in water can be measured accurately after the preconcentration.     

污染物在下包气带非饱水条件下迁移转化的研究

一、前言 城市污水施于农田,其中的污染物可能潜入地下水中造成危害,为了控制这种现象的发生,有必要开展污染物在地下包括下包气带的迁移转化规律研究,以供制订有关标准的依据。     

生物修复技术在白海面黑臭河涌治理中的应用

利用人工曝气、水体生物修复和河道生态恢复等技术,对广州市白海面黑臭水体进行治理。结果表明,在污水进水流量3000～4000m^3／d的条件下,通过生物治理,消除了水体黑臭现象,从上游到下游,水色由暗黄逐步转为黄、黄绿;在上游不断流入污水情况下,CODcr除去率达55％以上,NH3-N除去率为35％,TP除去率达25％以上。本研究为城市黑臭河道,特别是暂时无法截污的城郊河道的治理和养护提供了一套切实可行的方法。