In-situ synthesis of TiO2 rutile/anatase heterostructure by DC magnetron sputtering at room temperature and thickness effect of outermost rutile layer on photocatalysis

TiO_2 rutile/anatase heterostructure thin films with varying rutile thickness have been in-situ synthesized via DC magnetron sputtering with Ar gas at room temperature. The crystal texture, surface morphology, energy gap and optical properties of the films have been investigated by X-ray diffraction meter, grazing incidence X-ray diffraction meter, Raman spectroscopy, scanning electron microscopy, and UV–visible spectrophotometer, which indicates that the rutile/anatase heterostructure films are successfully fabricated. The further degradation experiments display that the photocatalytic activity can be dramatically affected by the thickness of the outmost rutile layer and the 100 nm thickness exhibits the best performance in all of the TiO_2 thin films. With the increase of the outmost rutile layer, the optical band gap of TiO_2 film displays a systematic decrease slightly. However,the change in photocatalytic activity does not coincide with that in the band gap. The photoresponse and electrochemical properties of the thin films have been characterized to understand the mechanism of the varied photocatalytic activity.     

Nitrate removal and extracellular polymeric substances of autohydrogenotrophic bacteria under various pH and hydrogen flow rates

In recent years there has been an increasing interest in the use of autohydrogenotrophic bacteria to treat nitrate from wastewater. However, our knowledge about the characteristics of extracellular polymeric substances (EPS) releasing by these activities is not yet very advanced. This study aimed to investigate the change in EPS compositions under various pH values and hydrogen flow rates, taking into consideration nitrogen removal. Results showed that pH 7.5 and a hydrogen flow rate of 90 mL/min were the optimal operating conditions, resulting in 100% nitrogen removal after 6 hr of operation. Soluble and bound polysaccharides decreased, while bound proteins increased with increasing pH. Polysaccharides increased with increasing hydrogen flow rate. No significant change of bound proteins was observed at various hydrogen flow rates.     

生物膜填料塔净化有机废气研究

为在国内开展生物化学法净化低浓度有机废气的研究工作,采用国内现有微生物菌种挂膜接种的生物膜填料塔净化低浓度甲苯废气,结果表明,在入口气体甲苯浓度0.183～1.803mg/L及气体流量86.4～190.8L/h（停留时间6.2～13.6s）的实验范围内,增加入口气体甲苯浓度和气体流量,可使甲苯的生化去除量增大,每升体积的生物膜填料对甲苯的生化去除量最大可达157.13mg/h。由实验结果推断,生物膜填料塔对废气中甲苯的净化去除过程属于传质控制过程。对比结果表明,本研究建立的动力学模式对实际过程有很好的适用性,计算值与实验值之间的相关系数R＝0.98。     

有机污染物在水体表面微层的富集行为

研究邻苯二甲酸二丁酯（ＤＢＰ）,邻苯二甲酸二异辛酯（ＤＥＨＰ）和阴离子表面活性剂在水体表面微层的富集行为．现场分析结果表明邻苯二甲酸酯在小型封闭湖泊表面微层中存在富集现象,富集倍数在１～１１之间,湖水的理化性质及采样方式均影响富集倍数的大小．室内微宇宙研究表明ＤＢＰ和ＤＥＨＰ在微宇宙水体表面微层中均存在富集现象,富集倍数分别为２．８１和１．９８,藻类、颗粒物和腐殖酸也同时在微宇宙水体表面微层中富集．当水体中加入表面活性物质和腐殖酸时,邻苯二甲酸酯（ＤＢＰ、ＤＥＨＰ）在表面微层的富集倍数随加入的２种物质浓度的增大而降低．对阴离子表面活性剂的富集动力学研究表明,当表面微层遭到破坏后,其在表面微层达富集平衡需较长时间,水体浓度也影响富集倍数     

污泥转移SBR工艺处理低浓度生活污水

污泥转移SBR工艺是一种通过内部污泥回流实现污泥在不同SBR隔室间转移,从而增加污泥利用效率,提高系统除污效能的新工艺。以设计规模为240 m3/d、处理低浓度生活污水的工艺系统为对象,研究了新工艺在不同泥转移量(污泥回流比)下的除污性能,并与系统以传统SBR方式运行的情况进行了对比。结果表明,新工艺可以有效提高SBR反应器的容积利用率;采用30%的污泥回流比进行污泥转移,新工艺的处理能力比传统SBR工艺提高近1/2,除磷效率从46%提升至85%。出水各项水质指标均能达到国家排放标准的要求。     

菱镁矿尾矿制备高活性MgO的性能表征

菱镁矿尾矿经预处理后,在一定条件下制备高活性MgO。使用热重-差热分析仪,分析菱镁矿尾矿的分解温度,应用X射线衍射、SEM分析不同煅烧温度、保温时间对MgO晶体结构的影响,并根据Scherrer公式计算MgO晶粒的尺寸。通过电导率仪测定MgO水化电导率,分析不同条件下的MgO活性,探讨煅烧温度、保温时间、颗粒细度与MgO活性之间的关系。结果发现:煅烧温度在1 050℃,保温时间60 min时,菱镁尾矿完全分解,MgO活性最佳;煅烧温度越高,保温时间越长,MgO的活性越差;MgO颗粒细度越小,活性越高。     

鼠李糖脂洗脱氯丹和灭蚁灵污染场地土壤的工艺参数

优化了鼠李糖脂洗脱氯丹、灭蚁灵污染土壤的工艺条件,为开展有机氯农药污染场地土壤洗脱修复工程实践提供科学依据和技术参数。实验结果表明,随着洗脱剂———鼠李糖脂浓度的增加,氯丹和灭蚁灵的洗脱量呈现先增加后降低的趋势;洗脱时间和液固比对洗脱效果的影响趋势与浓度相同;在0~120 r/min范围内,氯丹和灭蚁灵洗脱量随着搅拌速度的增加而增大,80、120和200 r/min的洗脱量间差异不显著;单次洗脱量随洗脱次数的增加而降低,累计洗脱量则逐渐增大。综上所述,氯丹、灭蚁灵污染场地土壤鼠李糖脂洗脱的适宜工艺参数为鼠李糖浓度10 mmol/L,搅拌速度80 r/min,固液比1∶10,洗脱时间20 min,洗脱3次。     

Characteristics of phosphorus chemistry and its geographical distribution in the Haihe River valley,North China

ＣｈａｒａｃｔｅｒｉｓｔｉｃｓｏｆｐｈｏｓｐｈｏｒｕｓｃｈｅｍｉｓｔｒｙａｎｄｉｔｓｇｅｏｇｒａｐｈｉｃａｌｄｉｓｔｒｉｂｕｔｉｏｎｉｎｔｈｅＨａｉｈｅＲｉｖｅｒｖａｌｌｅｙ，ＮｏｒｔｈＣｈｉｎａＪｉａｎｇＧａｏｍｉｎｇ；ＨｕａｎｇＹｉｎｘｉａｏ；Ｌ...     

Environmental input-output model and its analysis with a focus on the solid waste management sectors

ＩｎｔｒｏｄｕｃｔｉｏｎＳｉｎｃｅｔｈｅｆｉｒｓｔｅｎｖｉｒｏｎｍｅｎｔａｌｉｎｐｕｔｏｕｔｐｕｔｍｏｄｅｌ(ＥＩＯＭ)(Ｃｕｍｂｅｒｌａｎｄ,1966)ｗａｓｅｓｔａｂｌｉｓｈｅｄｂｙｉｎｃｏｒｐｏｒａｔｉｎｇｅｎｖｉｒｏｎｍｅｎｔａｌｆａｃｔｏｒｓｉｎｔ?..     

新疆油田高含硫化氢区块污染防治措施研究

针对车89井区的高含硫问题,新疆油田研究出化学除硫、负压闪蒸除硫和催化曝气除硫技术以及相关的配套工艺,并成功进行了现场试验;同时,为杜绝在车89井区环境敏感区域内污染事故的发生,新疆油田加大内外环保宣传软硬件建设力度,并依据专业评价实施了一系列防控管理措施,达到了预防在先、技术在先、管理在先的工作目标。