Detection of p34cdc2- and cyclin B-like proteins in Dunaliella tertiolecta (Chlorophyceae)

p34cdc2 and cyclin B are two key proteins in the eukaryotic cell cycle control machinery. They thus could be important cell cycle markers for studies of environmental effects on cell cycle progression and on growth rate of marine phytoplankton. From July 1993 to March 1995, we used commercially available antibodies to examine the presence of their homologs in a marine phytoplankton species, Dunaliella tertiolecta Butcher. A p34cdc2-like protein was detected on the Western blots, with an apparent molecular mass as expected (34 kDa). Anti-cyclin B detected a protein of 63 kDa, a size similar to that of cyclin B in other organisms. The two proteins decreased from the exponential to the stationary growth phase. As determined on the Western blots, their abundance only changed slightly during the cell cycle, being slightly more abundant prior to cell division. Immunofluorescence performed for a partially synchronized culture showed that the fraction of the cell population that was positively stained by anti-p34cdc2 was highest at the time when the culture was mainly in the late G1 or early S phase, and in the late G2 or early M phase, respectively. The fraction was low when the culture was mainly in the S phase. Although further characterization is required to verify their identities, these two growth phase-related proteins appear to be p34cdc2 and cyclin B homologs, which may be useful in studying the cell cycle and growth rates of phytoplankton.     

Memory effect on the dioxin emissions from municipal waste incinerator in Taiwan

Evaluation of the dioxin removal efficiency of the air pollution control device (APCD) at an existing municipal waste incinerator (MWI) located in Taiwan is conducted via stack sampling and analysis. The MWI investigated is equipped with cyclones, dry lime scrubbing systems and fabric filters as APCDs. Results indicate that the patterns of dioxin isomers at APCDs' inlet and stack are similar. During the first year of carbon injection, the concentrations of emitted dioxin decreased greatly. The dioxin removal efficiency increased from 26.9% to 96.6% after injecting 115 kg/day activated carbon (AC). At the second year, the dioxin removal efficiency reaches 98.7% after injecting the same rate of AC continuously. The lower efficiency achieved with activated carbon injection (ACI) during the first year can be attributed to the memory effect, i.e. the dioxin or precursor desorbs slowly to the flue gas and increases the dioxin concentration at stack, resulting in a lower dioxin removal efficiency than expected.     

Distribution Of Volatile Organic Compounds In Ambient Air Of Kaohsiung, Taiwan

Automobile emissions have created a major hydrocarbon pollution problem in the ambient air of Taiwan. The aim of this study was to determine the volatile organic compounds (VOCs) in the ambient air of Kaohsiung, Taiwan. The spatial distribution, temporal variation, and correlations of VOCs at three study sites, selected based on traffic densities and distances from a freeway, were discussed. Sixty-four hydrocarbons were identified in the ambient air. Among all of the VOC species, acetone, aromatic and aliphatic compounds constituted the major constituents. Higher concentrations of VOCs existed further away from major arteries as compared to those found near the freeway. Therefore, the distance from the freeway may not be a sufficient index for reflecting actual air quality in the study area. Weather conditions, wind speed and direction did not affect the distribution of VOC concentrations in the three study sites. Other factors, such as the height and density of buildings, traffic conditions or commercial activities, might affect the distribution of VOCs.     

Dynamic Mechanical Behavior and Thermal Characterization of Biofilms Based on Starch Modified by Fungi Isolates

Starches modified by Ophiostoma spp. have been investigated to develop bio-materials with enhanced mechanical and physical properties for thermoplastic applications. In this study, glass transition temperature (T_g) of modified starches was investigated in both dynamic mechanical analyzer (DMA) and differential scanning calorimeter (DSC) to detect molecular changes in the starch’s structure. Overall, two thermal transitions were observed in modified starches, as opposed to one in their native counterparts. Scanning electron microscopy of granular modified starch indicated visible damages and internal structural perturbations in addition to occlusion of granular pores by extraneous materials owing to possible enzymatic degradation and production of secondary metabolites. Modified starches registered two-fold improvement in storage modulus as compared to that of native starches. From the study of second derivative of the mass loss against temperature, two thermal transitions were also identified in modified starches. X-ray diffraction analyses showed that crystalline regions of the starch granules remained intact after the modification. It is proposed that the second phase transition potentially corresponds to modified amylose fractions and/or exopolysaccharides produced by the fungi.     

Chemical composition of ambient particulate matter and redox activity

Exposure to ambient particulate matter (PM) has been associated with a number of adverse health effects. Increasing studies have suggested that such adverse health effects may derive from oxidative stress, initiated by the formation of reactive oxygen species (ROS) within affected cells. The study aimed to assess physical characteristics and chemical compositions of PM and to correlate the results to their redox activity. PM_2.5 (mass aerodynamic diameter ≤2.5 μm) and ultrafine particles (UFPs, mass media aerodynamic diameter <0.1 μm) were collected in an urban area, which had heavy traffic and represented ambient air pollution associated with vehicle exhaust. Background samples were collected in a rural area, with low traffic flow. Organic carbon (OC), elemental carbon (EC), polycyclic aromatic hydrocarbons (PAHs), and metals were analyzed. The dithiothreitol activity assay was used to measure the redox activity of PM. Results showed that UFPs have higher concentrations of OC, EC, and PAHs than those of PM_2.5. Several metals, including Fe, Cu, Zn, Ti, Pb, and Mn, were detected. Among them, Cu had the highest concentrations, followed by Fe and Zn. Organic carbon constituted 22.8% to 59.7% of the content on the surface of PM_2.5 and UFPs. Our results showed higher redox activity on a per PM mass basis for UFPs as compared to PM_2.5. Linear multivariable regression analyses showed that redox activity highly correlated with PAH concentrations and organic compounds, and insignificantly correlated with EC and metals, except soluble Fe, which increased redox activity in particle suspension due to the presence of ROS.     

Occurrence of tetrodotoxin in the gastropodsRapana rapiformis andR. venosa venosa

Paralytic toxicity was detected in four of 17 specimens and six of 28 specimens of the gastropodsRapana rapiformis andR. venosa venosa, respectively, collected from Chiching (Kaohsiung City) and Nanfangao (Ilan County), Taiwan, in 1988 and 1989. The highest toxicities, calculated as tetrodotoxin (TTX) content, were 140 and 13 mouse units (MU) g^–1 digestive gland inR. rapiformis andR. venosa venosa, respectively. The toxins obtained from each species were purified by ultrafiltration and Bio-Gel P-2 column chromatography. The toxin's specific toxicities (as TTX) were 56 MU mg^–1 (R. rapiformis) and 52 MU mg^–1 (R. venosa venosa). Results of analyses by thin-layer chromatography, cellulose acetate membrane electrophoresis and high-performance liquid chromatography showed that TTX and anhydrotetrodotoxin were responsible for the toxicity. The alkali hydrolysate of each toxin showed maximum absorption at ca. 274 nm, which is the unique absorption for the C₉-base of TTX and its related substances (such as anhydrotetrodotoxin, 4-epitetrodotoxin, etc.). Here, we report for the first time the occurrence of TTX in the gastropodsR. rapiformis andR. venosa venosa.     

The interfacial mass transfer resistances of the ozone dry deposition over the field soil of Taichung County in Taiwan

This study aims to design a dry deposition chamber and to measure ozone depletion over the Taichung field soil. This study seeks to verify the phenomena by an experimental and mathematical model. It is demonstrated that interfacial mass transfer resistances of ozone dry deposition involve reactive resistance (R(sr)) and kinetic resistance (R(sk)). It reveals the chemical reaction (O3 + NO --> NO2) to produce the reactive resistance, and verifies that the interfacial mass transfer resistances depend on nitrogen oxide emission and soil temperature. It shows that the interfacial mass transfer resistances are reduced with increasing soil temperature (T(S)). The model profiles are smaller than the observed data within a relative error of 15%. The reactive resistance decreases exponentially with increasing soil temperature; R(sr)(-1) (cm x sec(-1)) = 0.0001 exp (0.1455T(S)). The kinetic resistance decreases linearly with increasing soil temperature; R(sk)(-1)(cm x sec(-1)) = 0.0108T(S) + 1.4012. This model is more accurate with higher soil temperature and larger ozone concentration. Results are consistent with thermodynamics and reaction kinetics. Ozone dry deposition over agricultural soil causes conversion of nitrogen oxide (NO) to nitrogen dioxide (NO2).     

Technique for aerosol generation with controllable micrometer size distribution

The purpose of this study is to develop an aerosol generating system that can produce particles of micrometer size in a convenient and efficient way. This system is comprised of an ultrasonic atomizer, potassium sodium tartrate tetrahydrate (PST) as solute and a program-controlled solute feeding unit with different PST concentrations. Both the aerosol concentration and size distribution pattern can be easily controlled and reproduced in the developed system. While the initial size of droplets generated from atomizer may remain unchanged, the size of residual dry aerosols was controlled by the solute concentration adjusted by the mixing ratio of solute and water. In addition, PST concentration could be alternatively adjusted in any cyclic way to provide particles with relatively mono-disperse, bimodal, varying size as well as skew distribution to meet requirements for various applications. The main advantage of the generating system is to generate particles of specific size distribution in order to simulate aerosols in ambient air or working places.     

Comparative Toxicity of Copper and Zinc to Isolated Eel Hepatocytes

Attempts were made to elucidate lethal responses of hepatocytes of Japanese eel (Anguilla japonica) exposed to Krebs-HEPES buffer at different concentrations of Cu⁺⁺ and Zn⁺⁺. It was found that the 2-hr LC₅₀ value of Cu⁺⁺ and Zn⁺⁺ on eel hepatocytes was 490 and 1576 μM for Cu⁺⁺ and Zn⁺⁺ in single solution, and 1734 and 5200 μM in mixed solution. the toxic effects of Cu⁺⁺ and Zn⁺⁺ on eel hepatocytes were characteristic of antagonistic interaction. After 2-hr exposure, the amount of accumulated metal on the hepatocytes and the mortality of hepatocytes were increased with increasing metal concentration in Krebs-HEPES buffer. the accumulated amount of both metals was significantly decreased when the eel hepatocytes were exposed to mixed metals than to single metal.     

Earthquake insurance pricing: a risk‐based approach

Flat earthquake premiums are ‘uniformly’ set for a variety of buildings in many countries, neglecting the fact that the risk of damage to buildings by earthquakes is based on a wide range of factors. How these factors influence the insurance premiums is worth being studied further. Proposed herein is a risk‐based approach to estimate the earthquake insurance rates of buildings. Examples of application of the approach to buildings located in Taipei city of Taiwan were examined. Then, the earthquake insurance rates for the buildings investigated were calculated and tabulated. To fulfil insurance rating, the buildings were classified into 15 model building types according to their construction materials and building height. Seismic design levels were also considered in insurance rating in response to the effect of seismic zone and construction years of buildings. This paper may be of interest to insurers, actuaries, and private and public sectors of insurance.