Prediction of the adsorption capacity for volatile organic compounds onto activated carbons by the Dubinin-Radushkevich-Langmuir model

Prediction of the adsorption capacity for volatile organic compounds (VOCs) onto activated carbons is elucidated in this study. The Dubinin-Radushkevich (D-R) equation was first used to predict the adsorption capacity of nine aromatic and chlorinated VOCs onto two different activated carbons. The two key parameters of the D-R equation were estimated simply from the properties of the VOCs using quantitative structure-activity relationship and from the pore size distribution of the adsorbent. The approach based on the D-R equation predicted well the adsorption capacity at high relative pressures. However, at the relative pressures lower than -1.5 x 10(-3), the D-R approach may significantly overestimate adsorption capacity. To extrapolate the approach to lower relative pressures, the integration of the D-R equation and the Langmuir isotherm, called the D-R-L model, was proposed to predict adsorption capacity over a wide range of relative pressures of VOCs. In this model, the Langmuir isotherm parameters were extracted from the predicted D-R isotherm at high relative pressures. Therefore, no experimental effort was needed to obtain the parameters of the D-R-L model. The model successfully predicted the adsorption capacity of aromatic and chlorinated hydrocarbons tested onto BPL and Sorbonorit B carbons over relative pressures ranging from 7.4 x 10(-5) to 0.03, suggesting that the model is applicable at the low relative pressures of VOCs often observed in many environmental systems. In addition, the molecular size of organic compounds may be an important factor affecting the adsorption capacity of activated carbons. For BPL carbon, an ultramicroporous adsorbent, the limiting pore volume Wo of the D-R equation decreased when the kinetic diameter of the adsorbate was larger than 6 angstroms. However, for Sorbonorit B carbon, no reduction of Wo was found, suggesting that the Wo may be related to the pore size distribution of the adsorbents, as well as to their molecular size. This size exclusion effect may play an important role in predicting the adsorption capacity of VOCs onto microporous adsorbents in the D-R-L model and in the corresponding D-R equation.     

Simultaneous removal of sulfur dioxide and polycyclic aromatic hydrocarbons from incineration flue gas using activated carbon fibers

Incineration flue gas contains polycyclic aromatic hydrocarbons (PAHs) and sulfur dioxide (SO₂). The effects of SO₂ concentration (0, 350, 750, and 1000 ppm), reaction temperature (160, 200, and 280 °C), and the type of activated carbon fibers (ACFs) on the removal of SO₂ and PAHs by ACFs were examined in this study. A fluidized bed incinerator was used to simulate practical incineration flue gas. It was found that the presence of SO₂ in the incineration flue gas could drastically decrease removal of PAHs because of competitive adsorption. The effect of rise in the reaction temperature from 160 to 280 °C on removal of PAHs was greater than that on SO₂ removal at an SO₂ concentration of 750 ppm. Among the three ACFs studied, ACF-B, with the highest microporous volume, highest O content, and the tightest structure, was the best adsorbent for removing SO₂ and PAHs when these gases coexisted in the incineration flue gas.

ImplicationsSimultaneous adsorption of sulfur dioxide (SO₂) and polycyclic aromatic hydrocarbons (PAHs) emitted from incineration flue gas onto activated carbon fibers (ACFs) meant to devise a new technique showed that the presence of SO₂ in the incineration flue gas leads to a drastic decrease in removal of PAHs because of competitive adsorption. Reaction temperature had a greater influence on PAHs removal than on SO₂ removal. ACF-B, with the highest microporous volume, highest O content, and tightest structure among the three studied ACFs, was found to be the best adsorbent for removing SO₂ and PAHs.     

On-Road Motor Vehicle Emissions and Fuel Consumption in Urban Driving Conditions

ABSTRACT

This paper reports on the analysis of on-road vehicle speed, emission, and fuel consumption data collected by four instrumented vehicles. Time-, distance-, and fuel-based average fuel consumption, as well as CO, HC, NO_x, and soot emission factors, were derived. The influences of instantaneous vehicle speed on emissions and fuel consumption were studied. It was found that the fuel-based emission factors varied much less than the time- and distance-based emission factors as instantaneous speed changed. The trends are similar to the results obtained from laboratory tests. The low driving speed contributed to a significant portion of the total emissions over a trip. Furthermore, the on-road data were analyzed using the modal approach. The four standard driving modes are acceleration, cruising, deceleration, and idling. It was found that the transient driving modes (i.e., acceleration and deceleration) were more polluting than the steady-speed driving modes (i.e., cruising and idling) in terms of g/km and g/ sec. These results indicated that the on-road emission measurement is feasible in deriving vehicle emissions and fuel consumption factors in urban driving conditions.     

Feeding and metabolism effects of three common microplastics on Tenebrio molitor L.

Environmental Geochemistry and Health - Mealworms from three different regions: Guangzhou, Tai’an and Shenzhen, were fed with three commonly used microplastics of polystyrene (PS), polyvinyl...     

‘Enclosing country park land and the conservation of military heritage:’ an Ostromian interpretation of the fools’ paradise

British colonial military heritage structures in Hong Kong are in a state of ruin and government neglect. Urgent attention is required in the form of active management to avoid the loss of valuable heritage resources and the negative impact on the landscape and environment. This paper explores two possible alternatives – user participation and social entrepreneur participation – to achieve innovative solutions to rent dissipation of these structures situated in isolated areas within protected-area boundaries, with a focus on a specific case. Emphasis is placed on fostering public participation, involving the allocation of some property rights. Elinor Ostrom's diagnostic approach to common-pool resource problems is applied to both solutions to determine the conditions necessary to achieve the objectives. The discussions are informed by social entrepreneurship principles and a version of the Coase Theorem, the latter coinciding with Ostrom's view regarding the role of property rights in achieving sustainable outcomes.     

Health risk of aerosols and toxic metals from incense and joss paper burning

We report for the first time the distribution and hazard potential of aerosol and metals resulting from joss paper burning. Burning joss paper and incense is a traditional custom in many Oriental countries. Large amounts of air pollutants, including particles, polycyclic aromatic hydrocarbons, toxic metals and other gaseous pollutants, are released into the environment during the burning stage. Many investigations have reported on the emission of pollutants from the incense burning. However, no work has been reported until now on the analysis of the released pollutants apart from polycyclic aromatic hydrocarbons. In this study, a micro-orifice uniform-deposit impactor and inductively coupled plasma optical emission spectrometry were, respectively, used to collect aerosols and characterize the toxic metals from joss paper burning. We studied two types of particulate matter (PM): PM_2.5 that are particles with a diameter smaller than 2.5 μm and PM₁₀ that are particles with a diameter smaller than 10 μm. PM_2.5 are the most potentially toxic particles. Our results showed that PM_2.5 are the major component of the pollutants and that the PM_2.5 to PM₁₀ ratio ranged from 62 to 99%. The metals Na, Ca, Mg, Al and K were the main species in the aerosol and in the bottom ash.     

Urban water infrastructure optimization to reduce environmental impacts and costs

Urban water planning and policy have been focusing on environmentally benign and economically viable water management. The objective of this study is to develop a mathematical model to integrate and optimize urban water infrastructures for supply-side planning and policy: freshwater resources and treated wastewater are allocated to various water demand categories in order to reduce contaminants in the influents supplied for drinking water, and to reduce consumption of the water resources imported from the regions beyond a city boundary. A case study is performed to validate the proposed model. An optimal urban water system of a metropolitan city is calculated on the basis of the model and compared to the existing water system. The integration and optimization decrease (i) average concentrations of the influents supplied for drinking water, which can improve human health and hygiene; (ii) total consumption of water resources, as well as electricity, reducing overall environmental impacts; (iii) life cycle cost; and (iv) water resource dependency on other regions, improving regional water security. This model contributes to sustainable urban water planning and policy.     

Bias from two analytical laboratories involved in a long-term air monitoring program measuring organic pollutants in the Arctic: a quality assurance/quality control assessment

Initiated in 1992, air monitoring of organic pollutants in the Canadian Arctic provided spatial and temporal trends in support of Canada's participation in the Stockholm Convention of Persistent Organic Pollutants. The specific analytical laboratory charged with this task was changed in 2002 while field sampling protocols remained unchanged. Three rounds of intensive comparison studies were conducted in 2004, 2005, and 2008 to assess data comparability between the two laboratories. Analysis was compared for organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs) and polycyclic aromatic hydrocarbons (PAHs) in standards, blind samples of mixed standards and extracts of real air samples. Good measurement accuracy was achieved for both laboratories when standards were analyzed. Variation of measurement accuracy over time was found for some OCPs and PCBs in standards on a random and non-systematic manner. Relatively low accuracy in analyzing blind samples was likely related to the process of sample purification. Inter-laboratory measurement differences for standards (<30%) and samples (<70%) were generally less than or comparable to those reported in a previous inter-laboratory study with 21 participating laboratories. Regression analysis showed inconsistent data comparability between the two laboratories during the initial stages of the study. These inter-laboratory differences can complicate abilities to discern long-term trends of pollutants in a given sampling site. It is advisable to maintain long-term measurements with minimal changes in sample analysis.     

Does an educational video for aneuploidy screening improve informed choice among pregnant women? A randomised controlled trial

Background

Poor knowledge and the lack of deliberation have been cited as reasons for women making uninformed choices about aneuploidy screening. Adequate pre-test counselling is of particular importance where non-invasive prenatal screening (NIPS) is being increasingly offered as a primary screening test.

Design

Women attending the antenatal clinic with a singleton pregnancy below 14 weeks were randomised to receive routine counselling or the intervention—a 16-min educational video on aneuploidy screening before their consult. The primary outcome, rate of informed choice, was assessed using an adapted multidimensional measure of informed choice questionnaire, where informed choice was defined as good knowledge and value-consistent behaviour. Secondary outcomes included informed choice with deliberation, decisional conflict and anxiety.

Results

Two hundred and eighty-six women were recruited. 69.8% of women in the intervention group made an informed choice compared with 53.6% in the control group (Risk Ratio [RR] 1.30, p = 0.014). A significantly higher number of women in the intervention group had good knowledge compared to controls (81% vs. 60.9%; RR 1.33, p = 0.001). Decisional conflict did not differ between groups, but women in the intervention group had higher anxiety scores (p < 0.001).

Conclusion

The study intervention was effective in helping women make informed choice. Qualitative studies to determine the reason for increased anxiety are needed.

Trial registration

Trial registry: ClinicalTrials.gov ; Identifier: NCT05492981.