Dietary exposure to PCBs based on food consumption survey and food basket analysis at Taizhou, China--the world's major site for recycling transformers

The levels of PCBs in different types of food (fish, shellfish, meat, rice, vegetables, and fruits) were analyzed to determine the dietary intake of 37 PCBs for local residents and e-waste workers (all lactating mothers) at Taizhou (China), a major electronic waste scrapping center, in particular for recycling transformers. The exposure to PCBs through dietary intake in Taizhou was estimated at 92.79 ngkg(-1)d(-1), contributed by consumption of freshwater fish (28%), rice (28%), meat (17%), shellfish (9%), vegetables (8%), egg (4%) and marine fish (2%). With regards to WHO-PCB-TEQ values, freshwater fish (40%), shellfish (24%), duck liver (18%) and rice (12%) were the main dietary sources with total daily intake (9.78 pg WHO-PCB-TEQ kg(-1)d(-1)), exceeding the FAO/WHO Tolerable Daily Intake (70 pg TEQkg(-1)body(-1)wt(-1)month(-1)).     

Evidence of excessive releases of metals from primitive e-waste processing in Guiyu, China

Guiyu, China is infamous for its involvement in primitive e-waste processing and recycling activities. Freshwater samples were collected in and outside of Guiyu for dissolved metal analysis. It was found that dissolved metal concentrations were higher in Lianjiang and Nanyang River within Guiyu than the reservoir outside of Guiyu. Lianjiang was enriched with dissolved As, Cr, Li, Mo, Sb and Se, while Nanyang River had elevated dissolved Ag, Be, Cd, Co, Cu, Ni, Pb and Zn. Temporal distributions of the metals suggested recent discharges of metals attributable to a strong acid leaching operation of e-waste, where dissolved Ag, Cd, Cu and Ni (0.344+/-0.014, 0.547+/-0.074, 87.6+/-3.0 and 93.0+/-1.4 microg/L, respectively) were significantly elevated. Pb isotopic composition of dissolved Pb confirmed that more than one non-indigenous Pb were present in Lianjiang and Nanyang River. In summary, it was evident that the riverine environment of Guiyu was heavily impacted by e-waste related activities.     

Polybrominated diphenyl ethers in plastic products,indoor dust,sediment and fish from informal e-waste recycling sites in Vietnam: a comprehensive assessment of contamination,accumulation pattern,emissions, and human exposure

Residue concentrations of polybrominated diphenyl ethers (PBDEs) in different kinds of samples including consumer products, indoor dust, sediment and fish collected from two e-waste recycling sites, and some industrial, urban and suburban areas in Vietnam were determined to provide a comprehensive assessment of the contamination levels, accumulation pattern, emission potential and human exposure through dust ingestion and fish consumption. There was a large variation of PBDE levels in plastic parts of obsolete electronic equipment (from 1730 to 97,300 ng/g), which is a common result observed in consumer plastic products reported elsewhere. PBDE levels in indoor dust samples collected from e-waste recycling sites ranged from 250 to 8740 ng/g, which were markedly higher than those in industrial areas and household offices. Emission rate of PBDEs from plastic parts of disposed electronic equipment to dust was estimated to be in a range from 3.4 × 10^?7 to 1.2 × 10^?5 (year^?1) for total PBDEs and from 2.9 × 10^?7 to 7.2 × 10^?6 (year^?1) for BDE-209. Some fish species collected from ponds in e-waste recycling villages contained elevated levels of PBDEs, especially BDE-209, which were markedly higher than those in fish previously reported. Overall, levels and patterns of PBDE accumulation in different kinds of samples suggest significant emission from e-waste sites and that these areas are potential sources of PBDE contamination. Intakes of PBDEs via fish consumption were generally higher than those estimated through dust ingestion. Intake of BDE-99 and BDE-209 through dust ingestion contributes a large proportion due to higher concentrations in dust and fish. Body weight normalized daily intake through dust ingestion estimated for the e-waste recycling sites (0.10–3.46 ng/day/kg body wt.) were in a high range as compared to those reported in other countries. Our results highlight the potential releases of PBDEs from informal recycling activities and the high degree of human exposure and suggest the need for continuous investigations on environmental pollution and toxic impacts of e-waste-related hazardous chemicals.     

Receptor modeling of source apportionment of Hong Kong aerosols and the implication of urban and regional contribution

Understanding the spatial–temporal variations of source apportionment of PM_2.5 is critical to the effective control of particulate pollution. In this study, two one-year studies of PM_2.5 composition were conducted at three contrasting sites in Hong Kong from November 2000 to October 2001, and from November 2004 to October 2005, respectively. A receptor model, principal component analysis (PCA) with absolute principal component scores (APCS) technique, was applied to the PM_2.5 data for the identification and quantification of pollution sources at the rural, urban and roadside sites. The receptor modeling results identified that the major sources of PM_2.5 in Hong Kong were vehicular emissions/road erosion, secondary sulfate, residual oil combustion, soil suspension and sea salt regardless of sampling sites and sampling periods. The secondary sulfate aerosols made the most significant contribution to the PM_2.5 composition at the rural (HT) (44 ± 3%, mean ± 1σ standard error) and urban (TW) (28 ± 2%) sites, followed by vehicular emission (20 ± 3% for HT and 23 ± 4% for TW) and residual oil combustion (17 ± 2% for HT and 19 ± 1% for TW). However, at the roadside site (MK), vehicular emissions especially diesel vehicle emissions were the major source of PM_2.5 composition (33 ± 1% for diesel vehicle plus 18 ± 2% for other vehicles), followed by secondary sulfate aerosols (24 ± 1%). We found that the contribution of residual oil combustion at both urban and rural sites was much higher than that at the roadside site (2 ± 0.4%), perhaps due to the marine vessel activities of the container terminal near the urban site and close distance of pathway for the marine vessels to the rural site. The large contribution of secondary sulfate aerosols at all the three sites reflected the wide influence of regional pollution. With regard to the temporal trend, the contributions of vehicular emission and secondary sulfate to PM_2.5 showed higher autumn and winter values and lower summer levels at all the sites, particularly for the background site, suggesting that the seasonal variation of source apportionment in Hong Kong was mainly affected by the synoptic meteorological conditions and the long-range transport. Analysis of annual patterns indicated that the contribution of vehicular emission at the roadside was significantly reduced from 2000/01 to 2004/05 (p < 0.05, two-tail), especially the diesel vehicular emission (p < 0.001, two-tail). This is likely attributed to the implementation of the vehicular emission control programs with the tightening of diesel fuel contents and vehicular emission standards over these years by the Hong Kong government. In contrast, the contribution of secondary sulfate was remarkably increased from 2001 to 2005 (p < 0.001, two-tail), indicating a significant growth in regional sulfate pollution over the years.     

Partition and tempospatial variation of gaseous and particulate mercury at a unique mercury-contaminated remediation site

This study investigated the seasonal variation and spatial distribution of gaseous and particulate mercury at a unique mercury-contaminated remediation site located at the near-coastal region of Tainan City, Taiwan. Gaseous elemental mercury (GEM), particulate mercury (PTM), and dustfall mercury (DFM) were measured at six nearby sites from November 2009 to September 2010. A newly issued Method for Sampling and Analyzing Mercury in Air (National Institute of Environmental Analysis [NIEA] Method A304.10C) translated from U.S. Environmental Protection Agency (EPA) Method 10-5, was applied for the measurement of atmospheric mercury in this particular study. One-year field measurements showed that the seasonal averaged concentrations of GEM and PTM were in the range of 5.56-12.60 and 0.06-0.22 ng/m3, respectively, whereas the seasonal averaged deposition fluxes of DFM were in the range of 27.0-56.8 g/km2-month. The maximum concentrations of GEM and PTM were 38.95 and 0.58 ng/m3, respectively. The atmospheric mercury apportioned as 97.42-99.87% GEM and 0.13-2.58% PTM. As a whole, the concentrations of mercury species were higher in the springtime and summertime than those in the wintertime and fall. The southern winds generally brought higher mercury concentrations, whereas the northern winds brought relatively lower mercury concentrations, to the nearby fishing villages. This study revealed that the mercury-contaminated remediation site, an abandoned chlor-alkali manufacturing plant, was the major mercury emission source that caused severe atmospheric mercury contamination over the investigation region. The hot spot of mercury emissions was allocated at the southern tip of the abandoned chlor-alkali manufacturing plant. On-site continuous monitoring of GEM at the mercury-contaminated remediation site observed that GEM concentrations during the open excavation period were 2-3 times higher than those during the nonexcavation period.     

Pesticide pollution in agricultural areas of Northern Vietnam: case study in Hoang Liet and Minh Dai communes

Soils and agricultural products from the Red River basin in Northern Vietnam were reported to be contaminated by agrichemicals. To assess potential exposure of local farmers and consumers to these contaminants, pesticide use and management practices of local farmers were surveyed and residue concentrations were determined for recently used as well as for banned pesticides in water, soil, vegetables, and fish samples in two communes of Northern Vietnam. DDTs, HCHs, and Drin compounds still persist at relatively high concentrations in soil and occur in vegetable and fish samples. Recently used pesticides, such as fenobucarb, trichlorfon, cyfluthrin, and cypermethrin were detected in vegetable and fish samples. Thresholds for acceptable daily intake levels (ADI) were frequently reached in the analyzed food products pointing to the fact that current pesticide management practices do not only result in a pollution of the environment but also pose threats to human health.     

Reduction of dioxin emission by a multi-layer reactor with bead-shaped activated carbon in simulated gas stream and real flue gas of a sinter plant

A laboratory-scale multi-layer system was developed for the adsorption of PCDD/Fs from gas streams at various operating conditions, including gas flow rate, operating temperature and water vapor content. Excellent PCDD/F removal efficiency (>99.99%) was achieved with the multi-layer design with bead-shaped activated carbons (BACs). The PCDD/F removal efficiency achieved with the first layer adsorption bed decreased as the gas flow rate was increased due to the decrease of the gas retention time. The PCDD/F concentrations measured at the outlet of the third layer adsorption bed were all lower than 0.1 ng I-TEQ Nm⁻³. The PCDD/Fs desorbed from BAC were mainly lowly chlorinated congeners and the PCDD/F outlet concentrations increased as the operating temperature was increased. In addition, the results of pilot-scale experiment (real flue gases of an iron ore sintering plant) indicated that as the gas flow rate was controlled at 15 slpm, the removal efficiencies of PCDD/F congeners achieved with the multi-layer reactor with BAC were better than that in higher gas flow rate condition (20 slpm). Overall, the lab-scale and pilot-scale experiments indicated that PCDD/F removal achieved by multi-layer reactor with BAC strongly depended on the flow rate of the gas stream to be treated.     

Evaluation of PCDD/F oxidation catalysts: confronting studies on model molecules with tests on PCDD/F-containing gas stream

Titania supported vanadium oxide is a renowned catalyst for the abatement of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) from gas effluents. To develop more active formulations, researchers mainly rely on lab-scale experiments on “PCDD/Fs-mimicking substances”, like (chloro)-benzene. Using such model compounds is convenient whereas handling PCDD/Fs in the laboratory is potentially hazardous and complicated. Recent studies, however, challenged some foremost conclusions of model compound based studies, starting from the observation that different model compounds gave contrasted results. Thus the present work aims at confronting some of these dubious conclusions with direct experimental tests on PCDD/Fs. One reference V₂O₅/TiO₂ catalyst and three modified formulations (V₂O₅/TiO₂-SO₄, V₂O₅-MoO₃/TiO₂, and V₂O₅-WO₃/TiO₂) have been evaluated. A dedicated apparatus was used which allows safe and reliable tests on a mixture of PCDD/Fs congeners. Some of the previously proposed catalyst improvement strategies actually prove to be disadvantageous in the removal of PCDD/Fs. In particular, MoO₃- and WO₃-modified catalysts were significantly less active than the reference catalyst. These observations show that conclusions from model compound based studies must be drawn with care and should ideally be confronted with tests on the actual target pollutants.     

Assessment of typical pollutants in waterborne by combining active biomonitoring and integrated biomarkers response

Organic pollutants, heavy metals and pharmaceuticals are continuously dispersed into the environment and have become a relevant environmental emerging concern. In this study, a situ assay to assess ecotoxicity of mixed pollutants was carried out in three typical sites with different priority contaminations in Guangzhou, China. Chemical analysis of organic pollutants, metals and quinolones in three exposure sites were determined by GC-ECD/MS, ICP-AES and HPLC, as well as, a combination of biomarkers including: ethoxyresorufin O-deethylase (EROD); aminopyrine N-demethylase (APND); erythromycin N-demethylase (ERND); glutathione S-transferase (GST); malondialdehyde (MDA); CYP1A; and P-glycoprotein (P-gp) mRNA expressions were evaluated in Mugilogobius abei. Results of chemical analysis in sediment samples revealed that the dominant chemicals were organic pollutants and heavy metals in Huadi River while quinolones in the pond. Bioassays indicated that differences among sites were in relation to some specific biomarkers. EROD and GST activities significantly increased after 72 h in situ exposure, but no difference was observed among the exposure sites. APND, ERND and MDA exhibited dissimilar change patterns for different priority pollutants. CYP1A and P-gp mRNA expressions were significantly induced at all exposure sites, whilst P-gp activity was typical for S2 with the highest levels of quinolones. The molecular biomarkers seemed to be more susceptible than enzyme activities. These assays confirmed the usefulness of applying a large array of various combined biomarkers at different levels, in assessing the toxic effects of mixed pollutants in a natural aquatic environment.     

Residual congener pattern of dioxins in human breast milk in southern Vietnam

This study evaluated residual congener patterns of dioxin/furan (=PCDD/DF) related to tactical herbicides aerially sprayed over the regions of southern Vietnam through Operation Ranch Hand. The study focused on Cam Chinh (CC) commune, Quang Tri province (an area sprayed with tactical herbicides), and the Cam Phuc (CP) commune, Ha Tinh province (a non-sprayed area). Breast milk samples for analysis were collected in September 2002 and July 2003 from lactating primiparous and multiparous mothers born after the war (<31 years old). We found the levels of each congener in the CC commune were higher than in the CP commune, and determined specificity in the PCDD/DF congener pattern in CC commune samples by cluster analysis. The congener pattern is characterized by higher (the hexa-, the hepta-, and the octa-) chlorinated PCDD/DFs; this appears to be the same profile as that presented by pentachlorophenol (PCP), rather than 2,4,5-trichlorophenoxy acid (2,4,5-T) contaminated with 2,3,7,8-TCDD. A GC/MS study in the 1970s detected the chlorophenols 2,4-di and 2,4,6-trichlorophenol in some Agent Orange samples, which contained, like PCP, a wide variety of PCDD/DF congeners. In this context, it may be expected that certain tactical herbicides contaminated with various chlorophenol impurities, have a unique congener pattern when compared with pure 2,4,5-T formulations.