Optimal methods to determine the physical parameters for activated carbon adsorption

The objectives of this research were to examine the physical characteristics of activated carbons made of different materials, thereby suggest a preferable approach to obtaining the optimal estimation of the parameters for the activated carbons by the statistical techniques. After the appropriate pretreatments, the apparent and true densities of activated carbon, adsorption isotherms of argon, nitrogen and mercury, and the adsorptive capacity of benzene were determined by using the recommended approaches. The results showed that the shapes of hysteresis loop indicated that the pores were probably slit‐shaped or formed by plate‐like particles, which could be confirmed by the SEM examination. It was noted that the apparent density used for pore volume calculation presented a higher possibility of underestimation. Through the use of the statistical techniques, such as factor analysis (FA) and correspondence analysis (CA), the principal physical parameters on adsorption phenomena could be characterized. Finally, the optimal methods for obtaining the surface area and pore volume of activated carbons were suggested.     

Arsenite transporters expression in rice (Oryza sativa L.) associated with arbuscular mycorrhizal fungi (AMF) colonization under different levels of arsenite stress

As a silicon hyperaccumulator, lowland rice takes up higher levels of As than many other plants due to silicic acid and arsenite sharing the same transporters (Lsi1 and Lsi2). Glomus intraradices (AH01) was inoculated to rice under different arsenite concentrations (0, 2 and 8 μM) in order to investigate the interactions between arbuscular mycorrhizal fungus and rice on the accumulation of arsenite. The relative mRNA expressions of Lsi1 and Lsi2 resulted in a down-regulating trend in mycorrhizal plants. Under 2 μM arsenite treatments, Lsi1 and Lsi2 were significantly decreased, by 0.7-fold (P < 0.05) and 0.5-fold (P < 0.01), respectively, in mycorrhizal plants when compared with non-mycorrhizal plants. This led to the decrease of arsenite uptake per unit of root dry mass. No organic As species were detected in both roots and shoots. The As(III)/As(V) ratios indicated that mycorrhizal plants immobilized most of the arsenite proportion in the roots and prevented its translocation from the roots to the shoots.     

Restoration of the Marine Ecological Environment Along the Charting Coast: Primary Productivity and Biomass Study

Since 1986, when green oysters occurred due to the copper and organic pollution in the Charting coastal area, the government banned all maricultural activity. It has been claimed that growing algae in a polluted environment may clean the water of pollutants and restore the marine ecosystem. to test this hypothesis, in the Charting coastal area a three-year programme (from August 1992 to July 1995) was carried out. the survey programme included environmental components such as salinity, temperature, pH, dissolved oxygen, biological oxygen demand (BOD), particulate organic carbon (POC), heavy metals and ecological indicators such as nutrients, chlorophyll-a, primary productivity. in the first year study, the environmental background data collected was used to select the suitable season and locations for growing large algae transferred from the laboratory to the field study area. Since September 1993, various species of large algae have been cultured. Although some of the growing algae were damaged by a typhoon in August 1994, the impact of the growing algae on the environmental conditions in the area has been monitored throughout. Elsewhere, we have reported that in the algae growing area higher dissolved oxygen with lower values of BOD and POC were found, and the concentrations of heavy metals in both water and sediments decreased. the purpose of this paper is to evaluate the possible impact of growing large algae on the ecological conditions in Charting coastal waters through the period from August 1983 to May 1995. As a result of the positive results obtained, large amounts of algae have again been cultured in the same area during the period from April 29 to May 25, 1995. We expect that inorganic and organic pollutants will be reduced by the algal growth, oyster mariculture will be restored and finally, the fishery resources potential will be increased.     

Identification of duchenne muscular dystrophy genomic probe P20 constant Taq1 fragment corresponding to the EcoRV and Msp1 polymorphisms

The majority of Duchenne and Becker muscular dystrophy cases are caused by deletions observable in Southern blots with cDNA probes for the gene. When the deletion includes polymorphic probes, they may be used to determine carrier status by deletion segregation analysis: non-inheritance of parental alleles, or heterozygosity. The polymorphic genomic probe P20 is deleted in a large percentage of probands. P20 hybridizes with two constant fragments of 6.7 and 0.8 kb in Taql digests. In a number of probands, only the larger P20 Taq1 fragment is deleted. This study demonstrates that this fragment corresponds with the polymorphic EcoRV and Mspl fragments of P20. Families in which the upper Taql fragment is deleted may be screened for carrier status using non-inheritance of parental alleles or heterozygosity of P20 in EcoRV or Mspl digests.     

Interactions Among the Copper Species and Forms in Sea Water/Sediments and Copper Bioaccumulation in Oysters

Earlier papers indicated that the first incident of green discoloration in oysters (Crassostrea gigas) and the mass mortality observed in 1986 along the Taiwan Erhjin Chi coastal area were caused by the higher contents of total copper and copper species (mainly bioavailable and free ion) in sea water. the copper in sea water would be sorbed by suspended matter and transferred to sediments, and the copper in the sediments would also be desorbed to sea water. Processes of copper adsorption and desorption are the major factors influencing the contents of total copper and copper species in sea water and sediments. in this study, the Erhjin Chi sediments were mixed with sea water by a shaker technique. When the mixture was shaken for one hour, analogous to tidal mixing in estuaries, only copper desorption from sediments was observed. If the shaking time is increased for more than 3 hours, the copper released from the sediments was resorbed to the remaining solid phases. the higher the contents of mud (91.71%) and total copper (701 mg kg^-1) in sediments, the higher the copper desorption rate (1.86 ppm hr^-1) and copper adsorption rate (0.50 ppm hr^-1) were observed. in sediments containing lower mud (0.80%) and lower copper (43.5 mg kg^-1), the copper desorption and adsorption rates were 0.83 ppm hr^-1 and 0.22 ppm hr^-1, respectively. the interactions among the total copper and copper species in sea water and sediments, chemical and ecological parameters, and copper bioaccumulation in oysters in the Erhjin Chi estuarine and coastal area are also discussed.     

Elutriation characteristics of fine particles from bubbling fluidized bed incineration for sludge cake treatment

In this study, measurements of elutriation rate were carried out in a bench scale bubbling fluidized bed incinerator, which was used to combust sludge cake. The particle size distribution and ignition loss were analyzed to study the elutriation characteristics of bubbling fluidized bed incineration. Drawn from the experimental data, the elutriation rate constant K(i)* for fine particles were obtained and correlated with parameters. It was found that most of the solid particles (about 95%) elutriated came from the fluidized medium (inorganic matters), but few came from unburned carbon particles or soot (about 5%). Finally, this paper lists a comparison of K(i)* between this study and the published prediction equations derived or studied in non-incineration modes of fluidized bed. A new and modified correlation is proposed here to estimate the elutriation rate of fine particles emitted from a bubbling fluidized bed incinerator. Primary operation variables (superficial gas velocity and incineration temperature) affecting the elutriation rate are also discussed in the paper.     

Receptor modeling for analyzing PCDD/F and dioxin-like PCB sources in Hong Kong

A total of 96 ambient air samples were collected from January 2004 to December 2004 for the investigation of dioxins (polychlorinated dibenzo-para-dioxins and polychlorinated dibenzofurans [PCDD/Fs]) and dioxin-like profile for polychlorinated biphenyls (PCBs) in the atmosphere of Hong Kong. Two-day back-trajectories were obtained using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model from National Oceanic and Atmospheric Administration (NOAA) Air Resources Laboratory. Receptor models – potential source contribution function (PSCF) and concentration-weighted trajectory (CWT) – were built based on the measured PCDD/Fs and dioxin-like PCBs total toxic equivalent (TEQ) concentrations. Both models were modified in this study so as to integrate the information obtained from three sampling sites in Hong Kong. The PSCF modeling resolved two main PCDD/F and dioxin-like PCB polluting paths from Mainland China. In line with previous studies, the northerly path around the Pearl River Delta might be one of the pollution sources of Hong Kong air. On the other hand, the receptor models also indicated another potential northeasterly source from Yangtze River Delta, which was seldom mentioned as the source region of Hong Kong air. Results from the CWT modeling suggested that the most toxic air mass affecting Hong Kong is probably attributable to the northeast path rather than the north path.     

SURFACE HEAT LOSS AND FRAZIL ICE PRODUCTION IN THE ST. LAWRENCE RIVER1

ABSTRACT: The rates of ice production due to surface heat loss in open water reaches of the St. Lawrence River, between the Ogdensburg-Prescott Boom and the Moses-Saunders Dam, are analyzed for the past 20 winters. Simple statistical parameters for ice production rates and air temperature are determined. Regression analyses for relationships between surface heat loss rates and freezing degree days indicate that an excellent linear correlation exists between these two variables. The study also shows that it is important to consider other heat exchange components, such as the bed heat flux and viscous dissipation, in the total ice production analysis for the river reach.     

Decomposition of 2-nitrophenol in aqueous solution by ozone and UV/ozone processes.

The decomposition of 2-nitrophenol in aqueous solutions by ozone and UV/ozone processes was found to be technically feasible under adequate experimental conditions. Formation of nitrate ions was observed following the decomposition of 2-nitrophenol by ozone and UV/ ozone processes. Increasing ozone dosage and UV light intensity accelerated the decomposition rate of 2-nitrophenol in an aqueous solution. The species distribution of 2-nitrophenol under various solution conditions plays a significant role in determining decomposition behavior. In most experiments conducted in this study, the decomposition of 2-nitrophenol by ozone and UV/ozone processes was favored to occur in alkaline conditions. The addition of 2-butanol accelerated the rate of gaseous ozone transfer to an aqueous phase by reducing the surface tension of aqueous solution and therefore enhancing the decomposition rate of 2-nitrophenol by ozone and UV/ozone processes.