A CFD study of the transport and fate of airborne droplets in a ventilated office: The role of droplet−droplet interactions

• Coulomb and Lennard−Jones forces were considered for droplet interactions. • The net droplet interactions were repulsive. • Repulsive droplet interactions increased the transport of droplets. • Repulsive droplet interactions significantly modified the fate of droplets. Previous studies reported that specially designed ventilation systems provide good air quality and safe environment by removing airborne droplets that contain viruses expelled by infected people. These water droplets can be stable in the environment and remain suspended in air for prolonged periods. Encounters between droplets may occur and droplet interactions should be considered. However, the previous studies focused on other physical phenomena (air flow, drag force, evaporation) for droplet transport and neglected droplet interactions. In this work, we used computational fluid dynamics (CFD) to simulate the transport and fate of airborne droplets expelled by an asymptomatic person and considered droplet interactions. Droplet drag with turbulence for prediction of transport and fate of droplets indicated that the turbulence increased the transport of 1 μm droplets, whereas it decreased the transport of 50 μm droplets. In contrast to only considering drag and turbulence, consideration of droplet interactions tended to increase both the transport and fate. Although the length scale of the office is much larger than the droplet sizes, the droplet interactions, which occurred at the initial stages of release when droplet separation distances were shorter, had a significant effect in droplet fate by considerably manipulating the final locations on surfaces where droplets adhered. Therefore, it is proposed that when an exact prediction of transport and fate is required, especially for high droplet concentrations, the effects of droplet interactions should not be ignored.     

Distribution and early life history of <Emphasis Type="Italic">Kaupichthys</Emphasis> leptocephali (family Chlopsidae) in the central Indonesian Seas

Leptocephali of the widely distributed tropical marine eels of the genus Kaupichthys (family Chlopsidae) were collected around Sulawesi Island during a sampling survey in the Indonesian Seas in late September and early October 2002, and the otolith microstructure of 24 of the 59 specimens captured was examined to learn about the larval growth rates and spawning times of these small sized eels. Leptocephali ranging in size from 25 to 60 mm were collected in Makassar Strait and the Celebes Sea, but they were most abundant in the semi-enclosed Tomini Bay of northeast Sulawesi Island. The Kaupichthys leptocephali examined had 39–161 otolith growth increments. Their back-calculated hatching dates indicated that five age groups were present and each group appeared to have been spawned around the full moon of previous months. Average growth rate estimates of the first two age groups were 0.65 and 0.54 mm/day for the 27.4–30.4 and 37.6–45.6 mm age classes. The growth rates of the oldest three age groups (52.0–60.8 mm) appeared to have slowed down after they reached their approximate maximum size. An increase in increment widths at the outer margin of the otoliths of those larger than 53 mm suggested that the process of metamorphosis had begun even though there were few external morphological changes indicating metamorphosis. It is hypothesized that chlopsid leptocephali have an unusually short gut that may not need to move forward during early metamorphosis. The presence of four age classes in Tomini Bay suggests that the Togian Islands region may be productive habitats for Kaupichthys juveniles and adults.     

Limited trophodynamics effects of trawling on three Mediterranean fishes

Trawling has a significant effect on the structure of marine communities, yet the ubiquity of trawling impacts makes testing such effects difficult. This study examines trawling impacts on trophodynamics of three fishes among the Gulfs of Castellammare and Termini Imerese (northern Sicily), the first of which has been subject to a trawling ban since 1990 that initially resulted in an eightfold increase in total fish biomass. The Gulf of Termini Imerese remains heavily fished and was treated as a control site. Nitrogen and carbon stable isotope data were used to assess fishing induced changes in trophic levels or source of production supporting three demersal fish species; Mullus barbatus, Merluccius merluccius and Lophius budegassa following a control-impact approach. The exclusion of trawling resulted in only small alteration of δ¹⁵N in two of the three-three species. There were no systematic changes in the δ¹³C of any species sampled. Thus, a large influence of trawling on the trophodynamics of the studied species at sampled size was discounted. Although stable isotopes do not have spatial or temporal resolution to identify detailed shifts in diet composition, their integrative nature highlights that the trophic role these species play is robust to fishing impacts at scales over which the fishery operates. This is despite a significant increase in the abundance of these species and of total fish biomass within the protected area.

---

An individual-based model to study the reproduction of egg bearing copepods: Application to Eurytemora affinis (Copepoda Calanoida) from the Seine estuary,France

Limited empirical studies have elucidated the daily egg production and associated reproductive processes of egg bearing copepod. Herein, we present an individual-based model which constitutes a realistic representation of the reproduction in egg bearing copepods. The model has been parameterized using an extensive set of experimental data obtained from the literature and from the laboratory and field experiments on the estuarine copepod Eurytemora affinis. The proposed model takes into account the adult female longevity, the clutch size and interclutch duration, which is a function of egg maturation time and latency time required by the female after egg hatching to produce a new clutch. The embryonic development time and hatching success are also taken into account. The effect of temperature on the means and variances of above-mentioned reproductive parameters has been also incorporated. A multi agent system based generic platform “Mobidyc” has been used to generate and calibrate the model. The model demonstrates the reproductive parameters of females of E. affinis which is validated through individual based experiments. Temperature specific simulations provide a dynamical explanation of temperature effect on the cumulative egg production. The daily survival principally affects the number of clutches produced per female during its life span. The results obtained in the present study by combining temperature and survival effects reveal the relatively greater importance of the first factor on the daily egg production of egg-carrying copepods. The present model is generic and hence easily applicable to other animals with comparable reproductive strategy.     

Re-orientation in clock-shifted homing pigeons subjected to a magnetic disturbance: a study with GPS data loggers

Some authors have proposed that homing pigeons are able to correct the error in orientation following a phase-shift treatment by using the magnetic compass reference. They reported that clock-shifted pigeons bearing magnets display a greater deflection compared to magnetically unmanipulated clock-shifted birds. However, this hypothesis tested by recording pigeons’ vanishing bearings has led to contradictory results. The present study reports pigeons’ tracks recorded with a GPS and shows that clock-shifted pigeons bearing magnets displayed a greater deviation through the whole route compared to the magnetically unmanipulated shifted pigeons. Moreover, the analysis of the tracks shows that the birds belonging to both experimental groups stop in coincidence with their subjective night. When re-starting their journey, the birds corrected the clock-shift induced error in orientation, but the magnetically manipulated pigeons were less efficient in doing so. Our results are consistent with the hypothesis that homing pigeons released from unfamiliar location re-orient after clock shift by using the magnetic compass.     

Recovery of solid fuel from municipal solid waste by hydrothermal treatment using subcritical water

Hydrothermal treatments using subcritical water (HTSW) such as that at 234 °C and 3 MPa (LT condition) and 295 °C and 8 MPa (HT condition) were investigated to recover solid fuel from municipal solid waste (MSW). Printing paper, dog food (DF), wooden chopsticks, and mixed plastic film and sheets of polyethylene, polypropylene, and polystyrene were prepared as model MSW components, in which polyvinylchloride (PVC) powder and sodium chloride were used to simulate Cl sources.While more than 75% of carbon in paper, DF, and wood was recovered as char under both LT and HT conditions, plastics did not degrade under either LT or HT conditions. The heating value (HV) of obtained char was 13,886-27,544 kJ/kg and was comparable to that of brown coal and lignite. Higher formation of fixed carbon and greater oxygen dissociation during HTSW were thought to improve the HV of char.Cl atoms added as PVC powder and sodium chloride to raw material remained in char after HTSW. However, most Cl originating from PVC was found to converse into soluble Cl compounds during HTSW under the HT condition and could be removed by washing.From these results, the merit of HTSW as a method of recovering solid fuel from MSW is considered to produce char with minimal carbon loss without a drying process prior to HTSW. In addition, Cl originating from PVC decomposes into soluble Cl compound under the HT condition. The combination of HTSW under the HT condition and char washing might improve the quality of char as alternative fuel.     

Photocatalytic bacterial inactivation by polyoxometalates

The photocatalytic inactivation (PCI) of Escherichia coli (Gram-negative) and Bacillus subtilis (Gram-positive) was performed using polyoxometalate (POM) as a homogeneous photocatalyst and compared with that of heterogeneous TiO₂ photocatalyst. Aqueous suspensions of the microorganisms (10⁷–10⁸ cfu ml⁻¹) and POM (or TiO₂) were irradiated with black light lamps. The POM-PCI was faster than (or comparable to) TiO₂-PCI under the experimental conditions employed in this study. The relative efficiency of POM-PCI was species-dependent. Among three POMs (H₃PW₁₂O₄₀, H₃PMo₁₂O₄₀, and H₄SiW₁₂O₄₀) tested in this study, the inactivation of E. coli was fastest with H₄SiW₁₂O₄₀ while that of B. subtilis was the most efficient with H₃PW₁₂O₄₀. Although the biocidal action of TiO₂ photocatalyst has been commonly ascribed to the role of photogenerated reactive oxygen species such as hydroxyl radicals and superoxides, the cell death mechanism with POM seems to be different from TiO₂-PCI. While TiO₂ caused the cell membrane disruption, POM did not induce the cell lysis. When methanol was added to the POM solution, not only the PCI of E. coli was enhanced (contrary to the case of TiO₂-PCI) but also the dark inactivation was observed. This was ascribed to the in situ production of formaldehyde from the oxidation of methanol. The interesting biocidal property of POM photocatalyst might be utilized as a potential disinfectant technology.     

Development of a black carbon-inclusive multi-media model: application for PAHs in Stockholm

A multi-media model was developed for predicting the fate of organic chemicals in the Greater Stockholm Area, Sweden, and applied to selected polycyclic aromatic hydrocarbons (PAHs). Although urban models have been previously developed, this model is novel in that it includes sorption to pyrogenically-derived particles, commonly termed "black carbon" (BC), within the model structure. To examine the influence of BC sorption on environmental fate of PAHs, two versions of the model were generated and run: one in which sorption to BC was included and one in which BC sorption was excluded. The inclusion of BC sorption did not cause any significant variations to air levels, but it did cause an average 20-30% increase in sediment concentrations related to increased sediment solids partitioning. The model also predicted reduced advective losses out of the model domain, as well as chemical potential to diffuse from sediments, whilst total chemical inventory increased. In all cases, the lighter PAHs were more affected by BC inclusion than their heavier counterparts. We advocate the addition of sorption to BC in future multi-media fate and exposure models, which as well as influencing fate will also alter (lower) chemical availability and, thus, wildlife exposure to hydrophobic chemicals. A quantification of the latter was derived with the help of the soot-inclusive model version, which estimated a lowering of dissolved water concentrations between five and >200 times for the different PAHs of this study.