Automotive Exhaust Emission Levels by Geographic Area and Vehicle Make A Nationwide Survey

Gross average automotive exhaust emissions data collected by the Atlantic Richfield Clean Air Caravan during the summer of 1970 showed only slight geographical variations when the specific makes were ignored. When considering specific makes, significant differences were found on an average emissions basis. Vehicle population—emission distributions showed wide variations in the 50% population levels and in the percent of vehicles with emissions greater than specified values. Hydrocarbon (HC) and carbon monoxide (CO) data are given on a gross basis for the 1970, 1968-69, 1966-67, and pre-1966 model year group vehicles. Average HC and CO emissions and vehicle population-Idle emissions distribution curves are included for specific make vehicles in selected areas.     

Methylcyclopentadienyl Manganese Tricarbonyl as an Antiknock: Composition and Fate of Manganese Exhaust Products

Methylcyclopentadienyl manganese tricarbonyl (MMT) has been marketed as a combustion improver for fuel oil and turbine fuel. Use concentrations for this purpose are about 0.025 g manganese/gal in fuel oil and 0.08 to 0.5 g/gal in turbine fuels. In addition, it has been used to a small extent in gasoline.     

Fine Paniculate Removal and S02 Absorption with a Two Stage Wet Scrubber

This paper includes results from pilot plant studies and early field demonstration units and a discussion of the application of the limestone wet scrubbing process to a low sulfur syb-butuminous coal. This latter application required the development of a hybrid two stage scrubber to enable collection of the fine particulate matter as well as removal of a significant amount of the sulfur dioxide.     

Experimental Characterization of Atmospheric Diffusion in Complex Terrain with Land-Sea Interactions

The body of information presented in this paper is directed to scientists working in atmospheric dispersion research and model development. Two years of field measurements in the coastal area of Bilbao in northern Spain show that the diffusion behavior in this complex terrain can be classified into several well defined patterns, which correspond to certain meteorological conditions. The approach taken has been the systematic use of SO₂ remote sensors (COSPEC) and ground level monitors in moving platforms which are used to follow and document the flow of the air mass. Results to date show that complex reentry cycles can occur and that synoptically different flows may be indistinguishable by wind sensors at ground level (affected by channeling), and yet result in totally different observed pollution levels by a fixed monitoring network (affected by topographical effects). These results are being used to parameterize the cause-effect relationships and guide the modeling efforts in this area of complex terrain.     

Simultaneous Sampling of Gas- and Aerosol-Phase TDI with a Triple Filter System

Abstract

A new triple filter system sampler/model is proposed for the precise and accurate simultaneous sampling and determination of gas- and aerosol-phase 2,4-toluene diisocyanate (TDI). The system consists of two front Teflon filters for sampling aerosol-phase TDI and a final coated glass fiber filter to collect gas-phase TDI. The aerosol-phase TDI is collected on the first Teflon filter, while the second Teflon filter is used to estimate gaseous TDI adsorbed by the first. According to the gas adsorption test of two Teflon filters in series, the TDI gas adsorption fraction of the two filters is almost the same. Results of the evaporation test using pure TDI aerosols collected on the Teflon filter show that significant evaporation of the compound does not occur during sampling. These two findings allow the use of a model to estimate accurate gasand aerosol-phase TDI concentrations. The comparison test with an annular denuder shows that the triple filter system can minimize the TDI sampling bias between the dual filter and the annular denuder systems.     

An Air Quality Data Analysis System for Interrelating Effects,Standards, and Needed Source Reductions: Part 13— Applying the EPA Proposed Guidelines for Carcinogen Risk Assessment to a Set of Asbestos Lung Cancer Mortality Data

Abstract

The Clean Air Act Amendments of 1990 (CAAA-90) list 189 hazardous air pollutants (HAPs) for which “safe” ambient concentrations are to be determined. The primary purpose of this paper is to develop two mathematical models, lognormal and logarithmic, that effectively express excess lung cancer mortality as a function of asbestos concentration for an example set of data and also to suggest using these two models for additional HAPs. The secondary purpose of this paper is to calculate a “safe” asbestos concentration by first assuming a default linear extrapolation (to one excess death per million people, as specified for carcinogenic HAPs). The resulting “safe” concentration is an impossible-to-achieve 1/1000 of present background asbestos concentrations. A letter to the editor and a response in this Journal issue use additional asbestos data that suggest that the “safe” concentration should be about 730 times higher than first calculated here and that a default nonlinear extrapolation should be used instead, with the “safe” concentration proportional to the desired mortality level raised to the 0.39 power. These results suggest that the most important problem in setting a “safe” concentration for each carcinogenic HAP is to determine the correct nonlinear extrapolation to use for each HAP.     

Antlers of Cervus elaphus as biomonitors of ⁹⁰Sr in the environment

Adequate radioprotection of the environment requires the identification of biomonitors sensitive to the variation of its radionuclide content. Due to the chemical similarities between calcium and strontium, calcified tissues of mammals are considered to be good ⁹⁰Sr biomonitors. This work considered Cervus elaphus antlers which, being shed annually, can give information about the importance of radiostrontium contamination in an ecosystem in the time period required for the growth of the antler. The samples were collected at various points of W and SW Spain. The mean value of their ⁹⁰Sr content was (70 ± 43 (S.D.)) Bq/kg d.w., range (16-218) Bq/kg d.w., and the radionuclide was evenly distributed in the different parts of the antler. There was a good correlation between the antlers’ ⁹⁰Sr content and the ⁹⁰Sr deposited in the soil. The antlers’ content of ²²⁶Ra (from the natural uranium series) and the contents of some stable elements (Ca, Mg, Sr, and K) were also determined. The values for these stable elements were practically constant in the analyzed samples, and the concentrations measured decreased in the following order:Ca » Mg > K > Sr » ⁹⁰Sr > ²²⁶Ra     

Realistic retrospective dose assessments to members of the public around Spanish nuclear facilities

In the frame of an epidemiological study carried out in the influence areas around the Spanish nuclear facilities (ISCIII-CSN, 2009. Epidemiological Study of The Possible Effect of Ionizing Radiations Deriving from The Operation of Spanish Nuclear Fuel Cycle Facilities on The Health of The Population Living in Their Vicinity. Final report December 2009. Ministerio de Ciencia e Innovación, Instituto de Salud Carlos III, Consejo de Seguridad Nuclear. Madrid. Available from: http://www.csn.es/images/stories/actualidad_datos/especiales/epidemiologico/epidemiological_study.pdf), annual effective doses to public have been assessed by the Spanish Nuclear Safety Council (CSN) for over 45 years using a retrospective realistic-dose methodology. These values are compared with data from natural radiation exposure. For the affected population, natural radiation effective doses are in average 2300 times higher than effective doses due to the operation of nuclear installations (nuclear power stations and fuel cycle facilities). When considering the impact on the whole Spanish population, effective doses attributable to nuclear facilities represent in average 3.5 × 10⁻⁵ mSv/y, in contrast to 1.6 mSv/y from natural radiation or 1.3 mSv/y from medical exposures.