Preparation and Fundamental Characterization of Cellulose Nanocrystal from Oil Palm Fronds Biomass

The objective of this work was to isolate cellulose nanocrystal (CNC) from oil palm fronds (Elaeis guineensis) and its subsequent characterization. Isolation involves sodium hydroxide/anthraquinone pulping with mechanical refining followed by total chlorine free bleaching (includes oxygen delignification, hydrogen peroxide oxidation and peracetic acid treatment) before acid hydrolysis. Bleaching significantly decreased kappa number and increased α-cellulose percentage of fibers as confirmed by Technical Association of the Pulp and Paper Industry standards. Transmission electron microscopy (TEM), X-ray diffraction, Fourier transform infrared spectroscopy and thermogravimetric analysis revealed that acid hydrolysis along with bleaching improved crystallinity index and thermal stability of the extracted nanocrystals. It was observed that CNC maintained its cellulose 1 polymorph despite hydrolysis treatment. Mean diameter as observed by TEM and average fiber aspect ratio of obtained CNC was 7.44 ± 0.17 nm and 16.53 ± 3.52, respectively making it suitable as a reinforcing material for nanocomposite.     

Recycling polymeric waste from electronic and automotive sectors into value added products

The environmentally sustainable disposal and recycling of ever increasing volumes of electronic waste has become a global waste management issue. The addition of up to 25% polymeric waste PCBs (printed circuit boards) as fillers in polypropylene (PP) composites was partially successful: while the tensile modulus, flexural strength and flexural modulus of composites were enhanced, the tensile and impact strengths were found to decrease. As a lowering of impact strength can significantly limit the application of PP based composites, it is necessary to incorporate impact modifying polymers such as rubbery particles in the mix. We report on a novel investigation on the simultaneous utilization of electronic and automotive rubber waste as fillers in PP composites. These composites were prepared by using 25 wt.% polymeric PCB powder, up to 9% of ethylene propylene rubber (EPR), and PP: balance. The influence of EPR on the structural, thermal, mechanical and rheological properties of PP/PCB/ EPR composites was investigated. While the addition of EPR caused the nucleation of the β crystalline phase of PP, the onset temperature for thermal degradation was found to decrease by 8%. The tensile modulus and strength decreased by 16% and 19%, respectively; and the elongation at break increased by ~71%. The impact strength showed a maximum increase of ~18% at 7 wt.%–9 wt.% EPR content. Various rheological properties were found to be well within the range of processing limits. This novel eco-friendly approach could help utilize significant amounts of polymeric electronic and automotive waste for fabricating valuable polymer composites.

Open image in new window

     

The response of soil Arthrobacter agilis lush13 to changing conditions: Transition between vegetative and dormant state

This work was aimed at studying the response of soil non-spore-forming actinobacterial strain Arthrobacter agilis Lush 13 to changing natural conditions, such as nutrient availability and the presence of degradable and recalcitrant aliphatic and aromatic substrates. The A. agilis strain Lush13 was able to degrade octane, nonane, hexadecane, benzoate, phenol, and 2,3-, 2,4-, 2,5-, 2,6-dichlorophenols, but not grew on 3,4-dichlorophenol, 2,3,4-, 2,4,5-, 2,4,6-trichlorophenol (TCP), pentachlorophenol (PCP), 2-chlorobenzoate, 3-chlorobenzoate, 3,5-dichlorobenzoate, 2,4-dichlorobenzoate. Under growth-arresting conditions due to nitrogen- or multiple starvation or recalcitrant (non-utilizable) carbon source, the studied strain preserved viability for prolonged periods (4–24 months) due to transition to dormancy in the form of conglomerated small and ultrasmall cyst-like dormant cells (CLC). Dormant cells were shown to germinate rapidly (30 min or later) after removal of starvation stress, and this process was followed by breakdown of conglomerates with the eliberation and further division of small multiple actively growing daughter cells. Results of this study shed some light to adaptive capabilities of soil arthrobacters in pure and polluted environments.     

Fir decline and mortality in the southern Siberian Mountains

Regional Environmental Change - Increased dieback and mortality of “dark needle conifer” (DNC) stands (composed of fir (Abies sibirica), Siberian pine (Pinus sibirica) and spruce (Picea...     

Patterns,correlates, and paternity consequences of extraterritorial foray behavior in the field sparrow (Spizella pusilla): an automated telemetry approach

Behavioral Ecology and Sociobiology - ᅟMales of fiddler crabs (genus: Uca) construct courtship structures using mud or sand to attract mate-searching females for underground mating. A sensory...     

Dynamic trends of heavy metal contents in plants and soil under different industrial air pollution regimes

Based on 30-year monitoring of Ni²⁺ and Cu²⁺ concentrations in the organic horizon of Albic Rustic Podzols and the foliage of six plant species, a dynamic trend in the level of heavy metal accumulation in the components of forest ecosystems of the Kola Peninsula has been revealed against the background of five- to eightfold reduction of pollutant emissions. The direction of the trend has been found to differ: the size of polluted area and pollution level increase with time, while the concentrations of heavy metals in plants decrease due to reduction in their input from the polluted air.     

Influence of experimental conditions on manifestation of the group effect in the gypsy moth, <Emphasis Type="Italic">Lymantria dispar</Emphasis> L.

The effect of rearing conditions for gypsy moth larvae on parameters of their development (its duration and mortality) was studied in experiments with early instar larvae reared singly or in groups. The manifestation of the group effect was analyzed depending on the choice of experimental unit (the larva or the rearing container) and the amount of volume per larva. The observed effects were evaluated quantitatively.     

Siberian musk deer in the diets of tiger and bears in the Sikhote-Alin

The role of the Siberian musk deer in the diets of the Amur tiger, brown bear, and Asian black bear has been studied in the Sikhote-Alin State Biosphere Reserve in 1992 to 2016. Information has been collected from 763 tiger feeding sites, and the contents of tiger feces have been analyzed. Radiotelemetry has been used to evaluate tiger–musk deer relationships. The musk deer accounted for 0.26% of all animal species found to be eaten by the tiger. Musk deer remains in feces of the tiger, brown bear, and Asian black bear occurred with frequencies of 1.3, 0.2, and 0.3%, respectively. A case of musk deer avoiding the presence of brown bear is described.     

Carbon fluxes from coarse woody debris in southern taiga forests of the Valdai Upland

Studies in three typical forest biotopes of the Valdai Upland were performed to evaluate the stocks and surface area of coarse woody debris from spruce and birch (in linear transects), its colonization by xylotrophic fungi (during reconnaissance surveys), and CO₂ emission (by a chamber method). The stock and surface area were minimum in a paludal birch forest (46.4 m³/ha and 960 m²/ha) and maximum in a decay area of spruce forest (256.1 m³/ha and 3761 m²/ha, respectively). The assemblages of wood-decay fungi had a composition typically found in southern taiga forests. The total CO₂ flux varied from 145 kg C-CO₂/ha per year in the paludal birch forest to 462 kg C-CO₂/ha per year in small herb–green moss spruce forest. It is concluded that air temperature is an informative predictor of seasonal C-CO₂ flux rate from coarse woody debris.