The contribution of biological particles to observed particulate organic carbon at a remote high altitude site

Although a significant fraction of atmospheric particulate mass is organic carbon, the sources of particulate organic carbon (POC) are not always apparent. One potential source of atmospheric POC is biological particles, such as bacteria, pollen, and fungal spores. Measurements of POC and biological particles, including bacteria, fungal spores, and pollen, were made as part of the Storm Peak Aerosol and Cloud Characterization Study in Steamboat Springs, CO in March–April 2008. Biological particles were identified and characterized using several methods. The results suggest that biological particles could account for an average of 40% of the organic carbon mass in particles with aerodynamic diameters less than 10 μm. These estimates of POC mass from biological particles are highly uncertain; however, the results suggest that biological particles could be a significant source of organic aerosol in the background continental atmosphere and further observations are needed to better constrain these estimates.     

To duckweeds (Landoltia punctata), nanoparticulate copper oxide is more inhibitory than the soluble copper in the bulk solution

CuO nanoparticles (CuO-NP) were synthesized in a hydrogen diffusion flame. Particle size and morphology were characterized using scanning mobility particle sizing, Brunauer-Emmett-Teller analysis, dynamic light scattering, and transmission electron microscopy. The solubility of CuO-NP varied with both pH and presence of other ions. CuO-NP and comparable doses of soluble Cu were applied to duckweeds, Landoltia punctata. Growth was inhibited 50% by either 0.6 mg L⁻¹ soluble copper or by 1.0 mg L⁻¹ CuO-NP that released only 0.16 mg L⁻¹ soluble Cu into growth medium. A significant decrease of chlorophyll was observed in plants stressed by 1.0 mg L⁻¹ CuO-NP, but not in the comparable 0.2 mg L⁻¹ soluble Cu treatment. The Cu content of fronds exposed to CuO-NP is four times higher than in fronds exposed to an equivalent dose of soluble copper, and this is enough to explain the inhibitory effects on growth and chlorophyll content.     

Distribution of mercury in the sediments of some freshwater bodies in Ethiopia

Sediment samples were collected from Tinishu Akaki River (TAR), Lake Awassa, and Lake Ziway, Ethiopia for determination of mercury. The air-dried samples were analyzed for mercury with a differential atomic absorption spectrometer after thermal evaporation of bound mercury converting it to its atomic form. Certified reference materials (CRMs) of sediments and soils were used to validate the method. The recovery of mercury from CRMs and sediments was in the range of 95–100%. The limit of detection for the determination of mercury was 50?ng?kg^?1. The concentration of total mercury in the sediments varied from 3.9 to 110?µg?kg^?1 for TAR, 14 to 67?µg?kg^?1 for Lake Awassa, and 17 to 110?µg?kg^?1 for Lake Ziway. It was found that the total mercury concentrations in all samples were below the United States Environmental Protection Agency guideline of 200?µg?kg^?1.     

Potentially toxic elements in some fresh water bodies in Ethiopia

A total of thirty three water samples were collected from Tinishu Akaki River, Lake Awassa, and Lake Ziway, Ethiopia. Multi-element determination of trace elements (V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Ag, Cd, Sn, Hg, and Pb) in water samples was carried out by inductively coupled plasma-mass spectrometry after acidification with 1% HNO₃. The concentration (in µg?L^?1) of the elements were in the range of 1.0–19, <0.42–83, 1.1–1580, <45–1760, <0.11–2.0, 0.43–13, 0.77–13, 6–300, <0.94–2.0, <0.3–1.5, <0.012–0.63, 0.13–4.8, <0.29, and 0.2–7.2 for V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Ag, Cd, Sn, Hg, and Pb, respectively. The concentrations of all the quantified elements, with the exception of Mn, were in the range of the permissible limits of the Ethiopian, European Community, and World Health Organization for both drinking water quality guidelines and irrigation water guidelines. The accuracy of the method was validated by analyzing trace elements in water standard reference material (SRM 1643e). The measured values of trace elements in the SRM agreed well with the certified values at the 95% confidence level.     

Potentialities,problems, policies and progress in modelling sustainable development: A dynamic,hierarchical approach

This paper discusses some of the potentials, problems, policies and progress in modelling sustainable development. After briefly describing ten approaches to modelling sustainable development, some of the methodological problems still to be resolved are addressed. It is then suggested that policies to promote sustainable development should operate at six different spatial levels connecting global, multinational, national, regional, local and individual. Attempting to model sustainable development in such a hierarchical manner is exceedingly difficult. One way of modelling sustainable development is to develop the concept of a sustainable corridor, combining ecological, economic and equity considerations in a hierarchical fashion and through space-time. A preliminary dynamic, hierarchical model is described connecting global and national patterns of development. Using global and national data for Scotland, the calibrated model, running under the business-as-usual scenario, shows that current development paths are unsustainable. It is shown that, by implementing a judicious choice of policies, a sustainable corridor for a global and a national system can be achieved. The ways in which this preliminary model can be developed to connect all six hierarchical levels are discussed.     

Is Scotland sustainable? A the series of indicators of sustainable development

Seven measures of sustainable development for Scotland are examined for the period 1980-1993. These measures are green net national product, genuine savings, ecological footprint, environmental space, human appropriation of net primary production, the index of sustainable economic welfare and the genuine progress indicator. Very different messages concerning sustainable development in Scotland emerge from these measures.     

Resource availability and the abundance of an N-based defense in Australian tropical rain forests

Plant defense theories predict that relatively resource-rich environments (those with more fertile soil) will support a greater abundance of plants with nitrogen-based chemical defense, but this has yet to be adequately tested. We tested this prediction by measuring the diversity and contribution to total biomass of cyanogenic plants (those that release hydrogen cyanide from endogenous cyanide-containing compounds) in the Australian tropical rain forest. We examined 401 species in thirty 200-m2 plots, six at each of five sites, for cyanogenesis. In upland/highland rain forest, two pairs of sites similar in rainfall and altitude, but differing in soil nutrients, were selected, as well as one site in lowland rain forest. Sites differed markedly in species composition and foliar N was positively related to soil fertility. Holding altitude constant, we did not detect significant differences in the proportion of cyanogenic species with soil fertility, nor did we consistently detect significant increases in the contribution of cyanogenic species to total biomass on higher nutrient sites. Thus we found no clear evidence that soil fertility affects the distribution and prevalence of species investing in a constitutive N-based defense at the community level.     

Introduction-global to local: Ecological Land Classification

Ecological Land Classification (ELC) is a scientific endeavour which attempts to organize, stratify and evaluate ecosystems (and complexes of ecosystems) for the purposes of land resource management. Since ecosystems themselves are not easily defined in practical terms, ELC is likewise not a trivial concept. Nonetheless, ELC is a prerequisite for ecosystem management and the conservation of biological diversity simply because ecosystems must be described, characterized and spatially-located before they can be managed. Regarding the current status and future direction of ELC, mainly in relation to forest management: 1) approaches to ELC construction and utilization have shifted considerably over the past 2 decades; 2) there appears to be a current consensus regarding basic approaches to ELC; 3) spatial scale is a critical variable that must be addressed by ELCs; 4) ELCs must strive to more directly address management objectives; 5) natural ecosystem functions need to be better integrated within ELC frameworks; and, 6) the need for quality, georeferenced ELC-related data will continue to grow.     

A blended hazard identification methodology to support process diagnosis

A novel hazard identification methodology applied to process systems is presented in this paper. This blended hazard identification (BLHAZID) methodology blends two different types of HAZID methods: the function-driven and component-driven approach. The BLHAZID method is based on a conceptual framework called the Functional Systems Framework, which describes structure–function–goal relationships in process systems.The goals of the BLHAZID methodology are to generate outcomes that contain a high coverage of hazards, describe detailed failure causality in process systems and express this knowledge in a structured form for effective reused in subsequent applications, such as fault diagnosis, operator training, design reviews, fault and event tree construction and hazard updates to satisfy major hazard facility requirements.Both the BLHAZID methodology and the Functional Systems Framework were developed with involvement and advice from two major industrial partners. An industrial case study of a benzene saturation unit is presented to illustrate how the BLHAZID methodology operates in practice.     

Effect of arsenic contaminated irrigation water on Lens culinaris L. and toxicity assessment using lux marked biosensor

Contamination of irrigation water represents a major constraint to Bangladesh agriculture, resulting in elevated levels in the terrestrial systems. Lux bacterial biosensor technology has previously been used to measure the toxicity of metals in various environmental matrices. While arbuscular mycorrhizal fungi have their most significant effect on phosphorus uptake, but showed alleviated metal toxicity to the host plant. The study examined the effects of arsenic and inoculation with an arbuscular mycorrhizal fungus, Glomus mosseae, on lentil (Lens culinaris L. cv. Titore). Plants were grown with and without arbuscular mycorrhizal inoculum for 9 weeks in a sand and terra-green mixture (50:50, V/V) and watered with five levels of arsenic (0, 1, 2, 5, 10 mg As/L arsenate). The results showed that arsenic addition above 1 mg/L significantly reduced percentage of mycorrhizal root infection. On further analysis a close relationship was established with the vegetative and reproductive properties of lentil (L. culinaris) plants compared to the percentage bioluminescence of the soil leachate. However, arbuscular mycorrhizal fungal inoculation reduced arsenic concentration in roots and shoots. Higher concentrations of arsenic (5, 10 mg As/L arsenate) reduced the mycorrhizal efficiency to increase phosphorus content and nitrogen fixation. Therefore, this study showed that increased concentration of arsenic in irrigation water had direct implications to the lentil (L. culinaris) plants overall performance. Moreover the use of bioassay demonstrated that mycorrhiza and clay particle reduced arsenic bioavailability in soil.