Integrated Coastal Zone Management in Egypt: The Fuka-Matrouh project

Egyptian coastlines comprise more than 3000 km along the Mediterranean and the Red Sea. The coastal area of Egypt is under severe and increasing pressure. After passing the law on the Environment (Law 4) in 1994, the Egyptian Environmental Affairs Agency (EEAA) was designated as the responsible agency to implement this law. In this respect, the EEAA formulates the general policy and prepares the necessary plans for the protection and promotion of the environment. Also, it follows up the implementation of such plans in coordination with competent administrative authorities. Integrated Coastal Zone Management (ICZM) is one of the items regulated and addressed by Law 4/94. A framework programme for ICZM in Egypt was issued in 1996. This paper presents the results of a pilot project financed by the Mediterranean Action Programme Coastal Area Management (CAMP), namely ‘Fuka-Matrouh-Egypt’ project, and implemented by the Priority Action Plan/Regional Activity Centre. It also presents the methodology followed in the study and the experience gained nationally that would lead to the sustainable development of the northwest Egyptian Coast.     

Treatment and desalination of domestic wastewater for water reuse in a four-chamber microbial desalination cell

Environmental Science and Pollution Research - Microbial desalination cells (MDCs) have been studied for contaminant removal from wastewater and salinity reduction in saline water. However, in an...     

Use of selected waste materials in concrete mixes

A modern lifestyle, alongside the advancement of technology has led to an increase in the amount and type of waste being generated, leading to a waste disposal crisis. This study tackles the problem of the waste that is generated from construction fields, such as demolished concrete, glass, and plastic. In order to dispose of or at least reduce the accumulation of certain kinds of waste, it has been suggested to reuse some of these waste materials to substitute a percentage of the primary materials used in the ordinary portland cement concrete (OPC). The waste materials considered to be recycled in this study consist of glass, plastics, and demolished concrete. Such recycling not only helps conserve natural resources, but also helps solve a growing waste disposal crisis. Ground plastics and glass were used to replace up to 20% of fine aggregates in concrete mixes, while crushed concrete was used to replace up to 20% of coarse aggregates. To evaluate these replacements on the properties of the OPC mixes, a number of laboratory tests were carried out. These tests included workability, unit weight, compressive strength, flexural strength, and indirect tensile strength (splitting). The main findings of this investigation revealed that the three types of waste materials could be reused successfully as partial substitutes for sand or coarse aggregates in concrete mixtures.     

Effect of Ionizing Radiation on the Morphological,Thermal and Mechanical Properties of Polyvinyl Alcohol/Polyethylene Glycol Blends

Blends of water—soluble polymers based on Poly vinyl alcohol (PVA) and Polyethylene glycol (PEG) have been prepared by the solution casting technique. The effect of various doses of γ-radiation on the structural properties of PVA/PEG polymer blends with all its compositions has been investigated. From the visual observation of all the blend compositions, it was found that, the best compatibility of the blend is up to 40% PVA/60%PEG. The structure–Property behavior of all the prepared blends before and after γ-irradiation was investigated by IR Spectroscopy, thermogravimetric analysis (TGA), mechanical properties and Scanning electron microscope (SEM). The gel content and the swelling behavior of the PVA/PEG blends were investigated. It was found that the gel content increases with increasing irradiation dose and PVA concentration in the blend. Swelling percent increased as the composition of PEG increased in the blend. The results obtained by FTIR analysis and SEM confirm the existence of possible interaction between PVA and PEG homopolymers. TGA of PVA/PEG blend, before and after γ-irradiation, showed that the unirradiated and irradiated PVA/PEG blends are more stable against thermal decomposition than pure PVA. Improvement in tensile mechanical properties of PVA/PEG blends was occurred.     

An experimental study on the effect of mobile phone conversation on drivers' reaction time in braking response

Introduction

This paper presents an experimental study in which the effect of three factors (distance between cars, mobile call duration, and time of driving (day or night)) on drivers' reaction time in braking response was investigated.

Methods

The experiment was performed in a real driving environment in which 27 male adults between the ages of 22 and 24 years participated. Three levels of the first two factors (i.e., distance between cars and call duration) and two levels of the last factor (i.e., time of driving) were selected to conduct the experimental study. A full factorial design of experiment with 18 treatment combinations and three replicates of each combination were used. Fifty-four trial runs were performed in a random manner and for each run drivers' reaction time in braking response was measured, which served the data for further analysis. Analysis of variance (ANOVA), interaction effect analysis, and various model adequacy tests were carried out using Design Expert software.

Results

The results of the study indicated that the most important factor affecting the drivers' reaction time in car braking response was the mobile call duration followed by the time of driving, with a high level of interaction between the two factors. It was also found that the distance between cars did not seem to have a significant effect on the reaction time in braking response. It is to be noted that these response times are expected to be higher under normal driving conditions where awareness of experimental environment is not present.

Impact on Industry

The findings of this study would help mobile phone industries in improving safety of mobile phone users in driving environment.     

Role of casting and curing conditions on the strength and drying shrinkage of greener concrete

The shrinkage of cement-based materials is a critical dimensional property that needs proper attention as it can influence the corresponding characteristics especially when the preparation of such cement-based material is done in hot weather. Studies have shown that the casting or curing conditions influence the performance of concrete. However, there is limited understanding of the combined role of casting temperature and curing conditions, especially for concrete made with unconventional binders. In this study, five supplementary cementitious materials (SCMs) were utilized as the substitute of the ordinary Portland cement (OPC) at different ratios to produce greener concrete and improve its characteristics and sustainability. The influence of four casting temperatures (i.e., 25 °C, 32 °C, 38 °C, and 45 °C) and two curing regimes (i.e., covering of samples using wet burlap and applying curing compound on the surface of samples) on the corresponding compressive strength and drying shrinkage at various ages was studied. The outcomes of this research revealed that the composition of the binders has a substantial impact on the characteristics of concrete. In addition, the casting temperature and curing regimes also have a huge role on the compressive strength of concrete produced with binary binders. For example, the compressive strength at 3 days of concrete made at 25 °C made with binary binders was reduced up to 31% compared to that made with only OPC as the binder when cured using wet burlap. Nonetheless, less than 38 ℃ was suitable to minimize the durability issues in the studied blended cement mixes.

     

Occurrence of pesticides and polychlorinated biphenyls in water of the Nile river at the estuaries of Rosetta and Damiatta branches, north of Delta, Egypt

A study was conducted from summer 1995 to summer 1997 to assess the seasonal occurrence of pesticide residues and other organic contaminants, polychlorinated biphenyls (PCBs), in water at the estuaries of Rosetta and Damiatta branches of the Nile river. The results indicated that organochlorine compounds (OCs) including HCB, lindane, p,p'-DDE, p,p'DDD, p,p'-DDT, aroclor 1254 and aroclor 1260 were present in all the water samples at concentration levels ranging between 0.195-0.240, 0.286-0.352, 0.035-0.067, 0.019-0.033, 0.024-0.031, 0.390-0.70 and 0.166-0.330 microgram/l, respectively. The levels of these compounds were higher in water of Damiatta branch than those found in water of Rosetta branch. Aldrin, dieldrin and endrin were not detected in all water samples. Only 4 compounds from 36 organophosphorus insecticides, fungicides and s-triazine herbicides tested were detected in water samples collected during summer and autumn seasons from Rosetta branch. The concentration levels of these detected compounds, dimethoate, malathion, captan, and ametryne, ranged from 0.011 to 0.340 microgram/l, respectively. Similar compounds during the same seasons as found in water of Rosetta branch were also detected in water of Damiatta branch except ametryne. The levels of the detected compounds (dimethoate, malathion and captan) ranged between 0.030 and 0.330 microgram/l. The levels of detected organophosphorus insecticides, fungicides and s-triazine herbicides were in the order: dimethoate > malathion > captan > ametryne.     

Assessment of domestic water quality: case study, Beirut, Lebanon

In urban cities, the environmental services are the responsibility of the public sector, where piped water supply is the norm for urban household. Likewise, in Beirut City (capital of Lebanon) official water authorities are the main supplier of domestic water through a network of piping system that leaks in many areas. Beirut City and its suburbs are overpopulated since it is the residence of 1/3 of the Lebanese citizens. Thus, Beirut suffers deficiency in meeting its water demand. Water rationing, as a remedial action, is firmly established since four decades by the Lebanese Water Authorities. Consumers resorted then to private wells to supplement their domestic water needs. Consequently, household water quality is influenced by external factors relating to well water characteristics and internal factors depending on the types of the pipes of the distribution network and cross connections to sewer pipes. These factors could result in chemical and microbial contamination of drinking water. The objective of this study is to investigate domestic water quality variation in Beirut City emerging form the aforementioned factors. The presented work encircles a typical case study of Beirut City (Ras Beirut). Results showed deterioration pattern in domestic water quality. The predicted metal species and scales within the water pipes of distribution network depended on water pH, hardness, sulfate, chloride, and iron. The corrosion of iron pipes mainly depended on Mg hardness.     

Management of biomass residues generated from palm oil mill: Vermicomposting a sustainable option

Solid waste management is one of the challenging problems worldwide and it is becoming more complex by the increase in population and subsequently the waste generated. In Malaysia, among industrial solid waste palm oil mill waste (POMW) contributes the highest share. Wastes from the oil palm mill includes palm oil mill effluent (POME), decanter cake, empty fruit bunches, seed shells and the fibre from mesocarp. Generally most of the waste generated is either disposed of via open dumping or used as fertilizers as such or as animal feed. Land application of POMW and POME is very common practice as it contains numbers of plant nutrients. Direct application of POMW into agricultural soil can result in a number of problems such as water pollution, leaching etc. To deal with these problems, vermicomposting of palm oil mill waste may be a sustainable waste management option.There are number of researches going on management of biomass residues from palm oil mill, but very few works are going on vermicomposting of these agro-industrial waste. Vermicomposting of POMW can be a good practice as it will also be helpful in recycling the useful plant nutrients and it is better than that of composting process. Present review deals with the various aspects of vermicomposting of POMW and its importance. Review also put forward the effect of potential application of vermicompost on plant growth. On the whole it looks for the possibility of vermicomposting of waste from palm oil mill as a sustainable waste management alternative.     

Oleuropein alleviates malathion-induced oxidative stress and DNA damage in rats

The effects of acute exposure to 250 mg/kg malathion and the protective effects of 20 mg/kg oleuropein, both administered intraperitoneally, were evaluated in Wistar male rats. Malathion administration increased malondialdehyde, nitric oxide, 8-hydroxy-2′-deoxyguanosine, total oxidant status, and DNA damage, yet decreased total antioxidant activity, superoxide dismutase, and catalase activities in blood, liver, and kidney. Administration of oleuropein reversed malathion-induced oxidative stress, lipid peroxidation, DNA damage, and antioxidant enzyme activity.