Phase transformation mechanism of boiler ash roasted with sodium salt for vanadium extraction

Journal of Material Cycles and Waste Management - Boiler ash, produced by burning heavy fuel oil (HFO) in electrical power plants, is one of the most serious environmental problems facing oil-rich...     

Exploring chemical analysis of vermicompost of various oil palm fibre wastes

The aim of this work was to study the physical and chemical properties of different oil palm wastes, viz. empty fruit bunch (EFB), oil palm frond (OPF) and oil palm trunk (OPT). A study (84 days duration) was conducted to evaluate the efficiency of an exotic earthworm species (epigeic-African Nightcrawler (Eudrilus euginae)) for the decomposition of different types of oil palm wastes (EFB, OPT and OPF) into valuable vermicompost. The decrease in earthworm’s biomass gain for EFB, OPT and OPF may be due to exhaustion of worm feed in vermicomposters. The percentage of nitrogen, phosphorous and potassium in vermicompost was found to increase while pH and total organic carbon declined as a function of the vermicomposting period. The vermicompost obtained showed an increase in heavy metal content for all the reactors, but levels were still in the range of nutrient in the vermicompost. The data reveal that vermicomposting (using African Nightcrawler) is a suitable technology for the decomposition of oil palm wastes, especially EFB into value-added material.     

Promoting the use of crumb rubber concrete in developing countries

The use of accumulated waste materials in third world countries is still in its early phases. It will take courage for contractors and others in the construction industry to recycle selected types of waste materials in the concrete mixes. This paper addresses the recycling of rubber tires accumulated every year in Jordan to be used in concrete mixes. The main objectives of this research were to provide more scientific evidence to support the use of legislation or incentive-based schemes to promote the reuse of accumulated waste tires. This research focused on using crumb tires as a replacement for a percentage of the local fine aggregates used in the concrete mixes in Jordan. Different concrete specimens were prepared and tested in terms of uniaxial compression and splitting tension. The main variable in the mixture was the volumetric percentage of crumb tires used in the mix. The test results showed that even though the compressive strength is reduced when using the crumb tires, it can meet the strength requirements of light weight concrete. In addition, test results and observations indicated that the addition of crumb rubber to the mix has a limited effect toward reducing the workability of the mixtures. The mechanical test results demonstrated that the tested specimens of the crumb rubber concrete remained relatively intact after failure compared to the conventional concrete specimens. It is also concluded that modified concrete would contribute to the disposal of the non-decaying scrap tires, since the amount being accumulated in third world countries is creating a challenge for proper disposal. Thus, obliging authorities to invest in facilitating the use of waste tires in concrete, a fundamental material to the booming construction industry in theses countries, serves two purposes.     

Genotype × environment interactions: survival performance of six internationally sourced provenances of <Emphasis Type="Italic">Azadirachta indica</Emphasis> A. Juss in a degraded land in Kano,Nigeria

In order to prevent ‘an impending neem failure’, from the incidence of the twin problems of the neem scale insect infestations and neem dieback, six authenticated provenances (Allahabad, Karnataka, Jodphur, Madinipur, Mukkambu and Annur), from the natural range of the species in India, were collected and appraised for survival in a degraded land in Kano, Nigeria. Established in a completely randomised block design with four replications, the trial was conducted with a view to restrengthening and/or replacing the already weakened Local Land Race of the species in the study area. There was a statistically significant difference in the survival of the seven provenances. The established differences are between Allahabad 83% (6.40 SEM), Mukkambu 83% (6.40 SEM), Annur 76% (4.90 SEM), Jodphur 63% (15.09 SEM) and Madinipur 56% (6.73 SEM), on the one hand, and Karnataka 17% (1.91SEM) and the Local Land Race, with 13% (0.13 SEM), on the other hand. The research recommends Allahabad and Mukkambu 83% (6.40 SEM) based on this outstanding performance.     

Ameliorative effect of zinc oxide nanoparticles against potassium bromate-mediated toxicity in Swiss albino rats

Environmental Science and Pollution Research - Potassium bromate (PB) is a commonly used food additive, a prominent water disinfection by-product, and a class IIB carcinogen. It exerts a various...     

Multivariate analysis for source identification of pollution in sediment of Linggi River,Malaysia

Rapid socioeconomic development in the Linggi River Basin has contributed to the significant increase of pollution discharge into the Linggi River and its adjacent coastal areas. The toxic element contents and distributions in the sediment samples collected along the Linggi River were determined using neutron activation analysis (NAA) and inductively coupled plasma-mass spectrometry (ICP-MS) techniques. The measured mean concentration of As, Cd, Pb, Sb, U, Th and Zn is relatively higher compared to the continental crust value of the respective element. Most of the elements (As, Cr, Fe, Pb, Sb and Zn) exceeded the freshwater sediment quality guideline-threshold effect concentration (FSQG-TEC) value. Downstream stations of the Linggi River showed that As concentrations in sediment exceeded the freshwater sediment quality guideline-probable effect concentration (FSQG-PEC) value. This indicates that the concentration of As will give an adverse effect to the growth of sediment-dwelling organisms. Generally, the Linggi River sediment can be categorised as unpolluted to strongly polluted and unpolluted to strongly to extremely polluted. The correlation matrix of metal-metal relationship, principle component analysis (PCA) and cluster analysis (CA) indicates that the pollution sources of Cu, Ni, Zn, Cd and Pb in sediments of the Linggi River originated from the industry of electronics and electroplating. Elements of As, Cr, Sb and Fe mainly originated from motor-vehicle workshops and metal work, whilst U and Th originated from natural processes such as terrestrial runoff and land erosion.     

Application of multivariate statistical analysis in the pollution and health risk of traffic-related heavy metals

This study aims to analyse the heavy metal pollutants in Jeddah, the second largest city in the Gulf Cooperation Council with a population exceeding 3.5 million, and many vehicles. Ninety-eight street dust samples were collected seasonally from the six major roads as well as the Jeddah Beach, and subsequently digested using modified Leeds Public Analyst method. The heavy metals (Fe, Zn, Mn, Cu, Cd, and Pb) were extracted from the ash using methyl isobutyl ketone as solvent extraction and eventually analysed by atomic absorption spectroscopy. Multivariate statistical techniques, principal component analysis (PCA), and hierarchical cluster analysis were applied to these data. Heavy metal concentrations were ranked according to the following descending order: Fe > Zn > Mn > Cu > Pb > Cd. In order to study the pollution and health risk from these heavy metals as well as estimating their effect on the environment, pollution indices, integrated pollution index, enrichment factor, daily dose average, hazard quotient, and hazard index were all analysed. The PCA showed high levels of Zn, Fe, and Cd in Al Kurnish road, while these elements were consistently detected on King Abdulaziz and Al Madina roads. The study indicates that high levels of Zn and Pb pollution were recorded for major roads in Jeddah. Six out of seven roads had high pollution indices. This study is the first step towards further investigations into current health problems in Jeddah, such as anaemia and asthma.     

Protective effects of thymoquinone and diallyl sulphide against malathion-induced toxicity in rats

Environmental Science and Pollution Research - Malathion is a potent organophosphate insecticide that inhibits acetylcholinesterase (AChE) enzyme. Our experimental objective was to investigate the...     

Land application of biomass residue generated from palm oil processing: its potential benefits and threats

Man’s increased demand for food and better living conditions has led to over exploitation of resources and the consequent generation of enormous amounts of liquid and solid waste materials. This is one of the global challenges for mankind. In Malaysia, palm oil mill waste (POMW) contributes the highest proportion of industrial solid wastes produced yearly. Wastes from the mills include palm oil mill effluent, decanter cake, empty fruit bunches, seed shells and the fibre from the mesocarp. Direct application of POMW into agricultural soil has resulted in a number of problems such as water pollution, leaching. However, with application rates specific for targeted plant species, land application can be employed as a permanent solution to the problem of waste from palm oil mills. This review examines the characteristics of each of the palm oil wastes and their potential for use as a future fertilizer supplement.