A comparative study of the effects of chloride, sulfate and nitrate ions on the rates of decomposition of H2O2 and organic compounds by Fe(II)/H2O2 and Fe(III)/H2O2

The effects of chloride, nitrate, perchlorate and sulfate ions on the rates of the decomposition of hydrogen peroxide and the oxidation of organic compounds by the Fenton's process have been investigated. Experiments were conducted in a batch reactor, in the dark at pH < or = 3.0 and at 25 degrees C. Data obtained from Fe(II)/H2O2 experiments with [Fe(II)]0/[H2O2]0 > or = 2 mol mol(-1), showed that the rates of reaction between Fe(II) and H2O2 followed the order SO4(2-) > ClO4(-) = NO3- = Cl-. For the Fe(III)/H2O2 process, identical rates were obtained in the presence of nitrate and perchlorate, whereas the presence of sulfate or chloride markedly decreased the rates of decomposition of H2O2 by Fe(III) and the rates of oxidation of atrazine ([atrazine]0 = 0.83 microM), 4-nitrophenol ([4-NP]0 = 1 mM) and acetic acid ([acetic acid]0 = 2 mM). These inhibitory effects have been attributed to a decrease of the rate of generation of hydroxyl radicals resulting from the formation of Fe(III) complexes and the formation of less reactive (SO4(*-)) or much less reactive (Cl2(*-)) inorganic radicals.     

Development of a continuously stirred flow cell for investigating sorption mass transfer

This paper introduces a new reversible-flow design for a continuously stirred reactor used to study sorption mass transfer in soil and solvent systems. The stirred reactor has potential advantages over conventional packed column or batch reactors because it isolates intraparticle sorption rate limitations from advective-dispersive transport, yet allows changes to flux through the reactor for analysis of sorption kinetics under dynamic conditions. Previously, stirred reactors have often failed due to clogging of sediment on the effluent frit. The reverse-flow backwashing design allows longer life and higher confidence in maintaining mixed conditions than previous designs. Mass transfer 'rate coefficients estimated from stirred and column experiments are compared; both techniques produced results consistent with a published correlation. The data also show that fitted sorption mass transfer coefficients can be strongly dependent on the choice of equilibrium partition coefficient (i.e. batch or first-moment derived values), and that the conventional two-site sorption kinetics model fails to accurately predict sorption mass transfer in the presence of changing solvent velocity through the reactor.     

Effects of lead contamination on the growth of lythrum salicaria (purple loosestrife)

The ability of individual species to tolerate or accumulate heavy metal pollutants has been investigated widely. Although invasive species may become established more easily in disturbed environments, relatively little is known about how an ability to tolerate pollutants might give invasive species a competitive advantage. This study is part of a series of experiments investigating native and invasive species interactions with chemical pollution and other forms of disturbance. The purpose of this experiment was to investigate the effects of lead on the growth of Lythrum salicaria. We exposed plants to different concentrations of lead and measured different growth parameters, such as biomass, length, leaf number, and biomass allocation to roots. For most measures, plants grown in lead-free conditions were larger than plants exposed to lead. Plants in the low (500 mg/l) and medium (1,000 mg/l) lead treatments did not differ from each other, while plants in the high (2,000 mg/l) lead treatment were significantly smaller. However, the biomass allocation to roots was not significantly different among treatments. Although their growth is affected, individuals of Lythrum salicaria demonstrated tolerance to lead contamination, which may aid in their colonization in lead-polluted wetlands.     

Laboratory evaluation of thermophilic-anaerobic digestion to produce Class A biosolids. 2. Inactivation of pathogens and indicator organisms in a continuous-flow reactor followed by batch treatment.

Thermophilic-anaerobic digestion in a single-stage, mixed, continuous-flow reactor is not approved in the United States as a process capable of producing Class A biosolids for land application. This study was designed to evaluate the inactivation of pathogens and indicator organisms in such a reactor followed by batch treatment in a smaller reactor. The combined process was evaluated at 53 degrees C with sludges from three different sources and at 51 and 55 degrees C with sludge from one of the sources. Feed sludge to the continuous-flow reactor was spiked with the pathogen surrogates Ascaris suum and vaccine-strain poliovirus. Feed and effluent were analyzed for these organisms and for indigenous Salmonella spp., fecal coliforms, Clostridium perfringens spores, and somatic and male-specific coliphages. No viable Ascaris eggs were observed in the effluent from the continuous reactor at 53 or 55 degrees C, with greater than 2-log removals across the digester in all cases. Approximately 2-log removal was observed at 51 degrees C, but all samples of effluent biosolids contained at least one viable Ascaris egg at 51 degrees C. No viable poliovirus was found in the digester effluent at any of the operating conditions, and viable Salmonella spp. were measured in the digester effluent in only one sample throughout the study. The ability of the continuous reactor to remove fecal coliforms to below the Class A monitoring limit depended on the concentration in the feed sludge. There was no significant removal of Clostridium perfringens across the continuous reactor under any condition, and there also was limited removal of somatic coliphages. The removal of male-specific coliphages across the continuous reactor appeared to be related to temperature. Overall, at least one of the Class A pathogen criteria or the fecal coliform limit was exceeded in at least one sample in the continuous-reactor effluent at each temperature. Over the range of temperatures evaluated, the maximum time required to meet the Class A criteria by batch treatment of the continuous-reactor effluent was 1 hour for Ascaris suum and Salmonella spp. and 2 hours for fecal coliforms.     

Metabolism, tissue disposition, and excretion of 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) in male Sprague-Dawley rats

A single oral dose of [14C] 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) was administered to conventional and bile-duct cannulated male Sprague-Dawley rats. Tissue disposition, excretion and metabolism was determined. BTBPE is a low-volume brominated flame retardant used in resins or plastics, and toxicity data in peer-reviewed journals is extremely limited. BTBPE was fairly insoluble in lipophilic solutions, which made dose preparation difficult. The great majority of 14C (>94%) was excreted in the feces of both groups of rats at 72 h, and tissue retention was minimal. Lipophilic tissues contained the highest concentrations of BTBPE, e.g. thymus, adipose tissue, adrenals, lung, and skin. Metabolites were excreted in the urine, bile and feces, but at a very low level. Fecal metabolites were characterized as monohydroxylated, monohydroxylated with debromination, dihydroxylated/debrominated on a single aromatic ring, monohydroxylated on each aromatic ring with accompanying debromination, and cleavage on either side of the ether linkage to yield tribromophenol and tribromophenoxyethanol. Despite a limited quantity of stable metabolites extractable in the feces, non-extractable 14C levels were relatively high (39% of the 0-24 h fecal 14C), which suggested that BTBPE could be metabolically activated in the rat and covalently bound to fecal proteins and/or lipids. It was concluded that limited absorption and metabolism of BTBPE would occur by ingestion in mammals.     

Dechlorination of pentachloroethane by commercial Fe and ferruginous smectite

Short-term experiments were conducted to investigate the effect of a commercial Fe and an iron-bearing clay mineral, ferruginuous smectite (SWa-1), on the degradation of pentachloroethane (PCA). After 3 h of contact time, SWa-1 catalyzed PCA dehydrochlorination to tetrachloroethene (PCE, 65% conversion), whereas commercial Fe promoted PCA stepwise dechlorination via dehydrochlorination (approximately 40% conversion) and subsequent PCE hydrogenolysis to trichloroethene (TCE). The addition of unaltered SWa-1 to commercial Fe led to a complete inhibition on TCE production, whereas the addition of reduced SWa-1 barely resulted in a 30% decrease.     

Chapter three: methodology of exposure modeling

In this chapter, the concept of exposure assessment and its evolution is introduced, and evaluated by critically appraising the pertinent literature as it applies to exposures to Particulate Matter (PM). Exposure measurement or estimation methodologies and models are reviewed. Three exposure/measurement methodologies are assessed. Estimation methods focus on source evaluation and attribution, sources include those outdoors and indoors as well as in occupational and in-transit environments. Fate and transport models and their inputs are addressed to estimate concentrations outdoors and indoors; source attribution techniques help focus on the contributing sources. Activity pattern techniques are also reviewed and their use in exposure models to estimate inhalation exposure to PM is presented. Deterministic, regression and other stochastic models of exposure to PM are reviewed and evaluated. Strengths, limitations, assumptions and affirmations of the use of exposure assessment as an integral component of risk assessment and risk management are discussed in the conclusions and discussions section of this work.     

Laboratory evaluation of thermophilic-anaerobic digestion to produce Class A biosolids. 1. Stabilization performance of a continuous-flow reactor at low residence time.

There is increasing interest in the United States in producing biosolids from municipal wastewater treatment that meet the criteria for Class A designation established by the U.S. Environmental Protection Agency. Class A biosolids are intended to be free of pathogens and also must meet requirements for reduction of the vector-attraction potential associated with untreated sludge. High-temperature processes are considered to produce Class A biosolids if the combination of operating temperature and treatment time exceeds minimum criteria, but this option is not applicable to mixed, continuous-flow reactors. Such reactors, or any combination of reactors that does not meet the holding time requirement at a specific temperature, must be demonstrated to inactivate pathogens to levels consistent with the Class A criteria. This study was designed to evaluate pathogen inactivation by thermophilic anaerobic digestion in a mixed, continuous-flow reactor followed by batch or plug-flow treatment. In this first of a two-part series, we describe the performance of a continuous-flow laboratory reactor with respect to physical and chemical operating parameters; microbial inactivation in the combined continuous-flow and batch treatment system is described in the second part. Sludges from three different sources were treated at 53 degrees C, while sludge from one of the sources was also treated at 55 and 51 degrees C. Relatively short hydraulic retention times (four to six days) were used to represent a conservative operating condition with respect to pathogen inactivation. Treatment of a fermented primary sludge led to an average volatile-solids (VS) destruction efficiency of 45%, while VS destruction for the other two sources was near or below 38%, the Class A criterion for vector attraction reduction. Consistent with other studies on thermophilic anaerobic digestion of sludges at short residence times, effluent concentrations of volatile fatty acids (VFAs) were relatively high. Also consistent with other studies, the most abundant VFA in the effluent was propionate. Gas production ranged from 0.3 to 0.5 m3/kg VS fed and from 0.8 to 1.3 m3/kg VS destroyed.     

Valuing deaths or years of life lost? Economic benefits of avoided mortality from early heat warning systems

The study aims to explore the main drivers influencing the economic appraisal of heat warning systems by integrating epidemiological modelling and benefit-cost analysis. To shed insights on heat wave mortality valuation, we consider three valuation schemes: (i) a traditional one, where the value of a statistical life (VSL) is applied to both displaced and premature mortality; (ii) an intermediate one, with VSL applied for premature mortality and value of a life year (VOLY) for displaced mortality; and (iii) a conservative one, where both premature and displaced mortality are quantified in terms of loss of life expectancy, and then valued using the VOLY approach. When applying these three schemes to Madrid (Spain), we obtain a benefit-cost ratio varying from 12 to 3700. We find that the choice of the valuation scheme has the largest influence, whereas other parameters such as attributable risk, displaced mortality ratio, or the comprehensiveness and effectiveness of the heat warning system are less influential. The results raise the question of which is the most appropriate approach to value mortality in the context of heat waves, given that the lower bound estimate for the benefit-cost ratio (option iii using VOLY) is up to two orders of magnitude lower than the value based on the traditional VSL approach (option i). The choice of the valuation methodology has significant implications for public health authorities at the local and regional scale, which becomes highly relevant for locations where the application of the VOLY approach could lead to benefit-cost ratios significantly lower than 1. We propose that specific metrics for premature and displaced VOLYs should be developed for the context of heat waves. Until such values are available, we suggest testing the economic viability of heat warning systems under the three proposed valuation schemes (i–iii) and using values for VOLY commonly applied in air pollution as the health end points are similar. Lastly, periodical reassessment of heat alert plans should be performed by public health authorities to monitor their long-term viability and cost-effectiveness.     

Assessment of patients' medical fitness to drive by primary care physicians: A cross-sectional study

Objectives: Motor vehicle collisions (MVCs) are a significant health burden in Saudi Arabia. The literature has consistently indicated that chronic medical conditions, such as diabetes, heart disease, stroke, obstructive sleep apnea, and neurodevelopmental disorders, increase the risk of MVCs. Therefore, assessment of driver fitness by primary care physicians (PCPs) remains a major health intervention that might reduce MVCs. We studied the practices of PCPs in assessing medical fitness to drive in at-risk patients.

Methods: We conducted a cross-sectional study of all 88 government-funded primary care centers in the city of Riyadh, Saudi Arabia. We administered a self-reported questionnaire to PCPs that inquired about their driving risk assessment for specific medical conditions.

Results: Among all PCPs and centers, 189 PCPs (63%) from 74 centers (84%) participated in our survey. The mean age of the PCPs was 40 ± 10 years, and 108 (57%) were men. The average clinical experience of the group was 13 ± 9 years. Fewer than half of PCPs considered diabetes mellitus (45%) and obstructive sleep apnea (46%) as potential risks for MVCs. Approximately 45% of PCPs did not notify any authority or relatives of potential driving issues that they noticed in their patients. Only 15% of the participants believed that PCPs were responsible for alerting authorities about their fitness to drive.

Conclusions: PCPs did not adequately assess their patients' driving history and eligibility. Efforts are needed to improve awareness among PCPs regarding the effects of chronic medical conditions on driving.