An atmospheric dispersion model for the environmental impact assessment of thermal power plants in Japan--a method for evaluating topographical effects

An atmospheric dispersion model was developed for the environmental impact assessment of thermal power plants in Japan, and a method for evaluating topographical effects using this model was proposed. The atmospheric dispersion model consists of an airflow model with a turbulence closure model based on the algebraic Reynolds stress model and a Lagrangian particle dispersion model (LPDM). The evaluation of the maximum concentration of air pollutants such as SO2, NOx, and suspended particulate matter is usually considered of primary importance for environmental impact assessment. Three indices were therefore estimated by the atmospheric dispersion model: the ratios (alpha and beta, respectively) of the maximum concentration and the distance of the point of the maximum concentration from the source over topography to the respective values over a flat plane, and the relative concentration distribution [gamma(x)] along the ground surface projection of the plume axis normalized by the maximum concentration over a flat plane. The atmospheric dispersion model was applied to the topography around a power plant with a maximum elevation of more than 1,000 m. The values of alpha and beta evaluated by the atmospheric dispersion model varied between 1 and 3 and between 1 and 0.4, respectively, depending on the topographical features. These results and the calculated distributions of y(x) were highly similar to the results of the wind tunnel experiment. Therefore, when the slope of a hill or mountain is similar to the topography considered in this study, it is possible to evaluate topographical effects on exhaust gas dispersion with reasonable accuracy using the atmospheric dispersion model as well as wind tunnel experiments.     

Effects of temperature and food availability on growth and reproduction in the neustonic pedunculate barnacle Lepas anserifera

To elucidate the life history of neustonic animals, growth and reproductive patterns were investigated in the hermaphroditic pedunculate barnacle Lepas anserifera in field and laboratory experiments in Wakayama, western Japan from 2006 to 2008. The effects of temperature (19, 24 or 29°C) and food availability (once or twice a week) on growth and reproduction were also studied in the laboratory. The barnacles grew and matured rapidly, especially in the field: individuals on the average grew from 3 mm to more than 12 mm in capitulum length within 15 days and some were brooding. High temperature and high food availability resulted in greater growth. High temperature also resulted in earlier maturation of both testes and ovaries, whereas the effect of food availability was less clear. The rapid growth and maturation, together with earlier maturation at higher temperatures, may be an adaptation to ephemeral floating objects to which they attach.     

Evaluating long-term urban resilience through an examination of the history of green spaces in Tokyo

Long-term urban resilience requires urban systems with the capacity to respond to change and disturbance and to enhance the conditions for lasting wellbeing. Over the past century Tokyo has demonstrated impressive resilience, especially a capacity to reorganise and rebuild in response to successive major disturbances. Throughout these recoveries, the city-region maintained a focus on re-establishing, improving and maintaining international competitiveness through industrial development. Green spaces in Tokyo provided a flexible, but gradually disappearing resource. Today, to meet the needs of its ageing and minimally expanding population for enhanced wellbeing, Tokyo requires active transition planning covering many intertwined factors, but the adaptive capacity provided by the green space resource is no longer available. The Tokyo case underscores the risk inherent in the depletion of non-renewable resources (in this instance, green space) to secure immediate recovery and accommodate growth and short-term resilience at the expense of long-term resilience.     

Concentrations of organic wood preservatives in wood chips produced from wood wastes

We investigated the concentrations of wood preservatives in the wood chips produced in wood-waste processing facilities in 1988, 1998–1999, and 2001–2002. Among the wood preservatives used in the past in Japan, halophenols, including PCP, chlordane, and chlorpyrifos, had comparatively high detection rates and high average concentrations in the wood chips produced in 2001–2002. Aldrin and endrin were rarely detected, and DDT was already in low concentrations in those wood chips. Although several types of wood preservative were contained in the wood chips, their concentration levels depended on the sources of the wood wastes. In chips produced from wooden pallets, wooden forms for concrete working, or wood discarded from nondemolition sources, no organochlorine wood preservatives were detected, and chlorpyrifos and chlorophenols were detected at one order of magnitude lower than the average concentrations in chips produced from wood wastes discarded in house demolitions.     

Estimation of critical ratio of bentonite addition to tuff sand

A design method was proposed to determine the critical ratio of bentonite addition, based on a macro void ratio that considers the swelling property of bentonite. The critical ratio of bentonite addition was defined as the ratio corresponding to a macro void ratio of zero. However, when lightweight soil such as tuff sand is mixed with bentonite, the estimated critical ratio of bentonite addition is too high. Several tests on the water absorbing property of tuff sand and its permeability were conducted to confirm the concept of a revised macro void ratio. The revised macro void ratio, which takes into account the swelling of bentonite and the particle pores of lightweight soil, is much smaller than the former macro void ratio for a given ratio of bentonite addition. The estimated critical ratio of bentonite addition to tuff sand that gives a revised macro void ratio of zero is around 18% and is in good agreement with the ratio of bentonite addition beyond which the value of hydraulic conductivity does not decrease markedly.     

Spatial trends and impairment assessment of mercury in sport fish in the Sacramento–San Joaquin Delta watershed

A three-year study was conducted to examine mercury in sport fish from the Sacramento–San Joaquin Delta. More than 4000 fish from 31 species were collected and analyzed for total mercury in individual muscle filets. Largemouth bass and striped bass were the most contaminated, averaging 0.40 μg/g, while redear sunfish, bluegill and rainbow trout exhibited the lowest (<0.15 μg/g) concentrations. Spatial variation in mercury was evaluated with an analysis of covariance model, which accounted for variability due to fish size and regional hydrology. Significant regional differences in mercury were apparent in size-standardized largemouth bass, with concentrations on the Cosumnes and Mokelumne rivers significantly higher than the central and western Delta. Significant prey–predator mercury correlations were also apparent, which may explain a significant proportion of the spatial variation in the watershed.     

Highly efficient polishing technology for glass substrates using tribo-chemical polishing with electrically controlled slurry

The outstanding advantage of the novel polishing technology developed by the authors is a considerable reduction in cerium oxide consumption for polishing of glass substrates. This has been realized by introducing tribo-chemical polishing method along with a technique to control the movement of abrasives using an AC electric field. In this paper, we have analyzed the characteristics of the new polishing technique from the viewpoint of slurry distribution in the polishing area under various electric field conditions using a digital image processing and its influence on polishing performance using the experimental setup consisting of high speed polishing method under AC electric field. The results confirmed the increase of slurry distribution in the polishing area under appropriate AC electric field conditions and consequently led to enhanced removal rate, which was 2.5 times higher than that of the conventional CMP (chemical mechanical polishing) method. Furthermore, in spite of enhanced removal rate the surface roughness was comparable to CMP method.     

Treatment of bleaching wastewater from pulp paper plants in China using enzymes and coagulants

ＩｎｔｒｏｄｕｃｔｉｏｎＢｌｅａｃｈｉｎｇｗａｓｔｅｗａｔｅｒｆｒｏｍｐｕｌｐｐａｐｅｒｐｌａｎｔｓｃｏｎｔａｉｎｓｍａｎｙｋｉｎｄｓｏｆｃｈｌｏｒｉｎａｔｅｄｏｒｇａｎｉｃｃｏｍｐｏｕｎｄｓｗｈｉｃｈａｒｅｐｒｏｖｅｄｔｏｂｅｃａｒｃｉｎｏｇｅｎｉｃ，ｍｕｔａｇｅｎｉｃａｎｄｒｅｆｒａｃｔｏｒｙ（Ｇｅｌｌｍａｎ，１９８８；Ｐａａｓｉｖｉｒｔａ，１９８８；Ｇａｒｄｅｎ，１９９０；Ｓｕｎｔｉｏ，１９８８；Ｖｕｏｒｉｎｅｎ，１９８７；Ｓｅｐｐａｌａ，１９８８）．Ｓｅｖｅｒａｌｍｅｔｈｏｄｓ，ｉｎｃ…     

Adsorption capacity of powdered activated carbon for 3,5-dichlorophenol in activated sludge

The objectives of this study were to evaluate the performance of powdered activated carbon treatment (PACT) process based on the adsorption capacity of powdered activated carbon (PAC) in activated sludge and the effect of dissolved organic substances in activated sludge on the adsorption capacity of PAC. The DCP adsorption capacity of three PACs originated from different raw materials (coal, soft coal and sawdust) in activated sludge were 29%, 34% and 17% of that of new PAC, respectively. The performance of PACT process for shock loading of 3,5-dichlorophenol (3,5-DCP) was different among PACs in spite of the same adsorption capacity in new PAC. The performance of PACT process for removal of DCP is dependent not on the adsorption capacity of new PAC but on the adsorption capacity of PAC in the aeration tank. Dissolved organic matter (DOM) with molecular weight smaller than 50kDa did not affect the adsorption capacity of PAC for 3,5-DCP in the activated sludge reactor. DOM with molecular weight larger than 50kDa and biofilm developed on the surface of PAC seemed to be responsible for the decreased adsorption capacity of PAC for the DCP.     

Biological solubilization and mineralization as novel approach for the pretreatment of food waste

The performance of a garbage disposal system to solubilize and mineralize food wastes through biological solubilization was evaluated through the examination of the effects of operational conditions like water supply volume, water supply frequency and aeration on the amount of waste solubilized, mineralized and accumulated in the reactor. The biological solubilization process consisted of a solubilization reactor and a circulation tank. Food waste and fresh water were supplied into the solubilization reactor with support media. Wastewater from the solubilization reactor was discharged to the circulation tank and water in the circulation tank was periodically pumped back to the solubilization reactor. In case of the total food waste loading of 16 kg m(3-1) d(-1), little carbon (0-5.7%) accumulated in the reactor as long as the system was kept under aerobic condition through large volume of water supply (higher than 3.5 lh(-1)) or applying aeration in the circulation tank. However, 42% of the loaded carbon accumulated under anaerobic condition in low water supply (less than 1.8 lh(-1)). The rest of the waste was either solubilized or mineralized. The aeration in the circulation tank, therefore, was effective to provide similar solubilization and mineralization as the large volume of water supply. However, frequency of feeding at the large volume of water supply had no significant effect on the amount of waste solubilization and mineralization.