Toward a green economy: The nexus between economic and environmental factors in MENA countries,ARDL bounds approach

With the transition of the global economy toward a green economy, it is important to analyze the elements that can either support or impede this transformation. Therefore, in this study, we aimed to evaluate the potential of the green economy in the Middle East and North Africa (MENA) countries by analyzing the correlation between economic and environmental factors. The objective of this study is to explore the potential of the green economy in MENA countries by analyzing key factors such as access to clean fuel, GDP, and CO₂ emissions. The study aims to distinguish between long- and short-term effects, assess the presence of a long-run relationship or co-integration between the parameter estimates, and evaluate the progress of MENA countries toward a green economy based on the impact of economic, and environmental factors. Using quarterly and seasonally adjusted data from 2000 to 2018, the auto-regressive distributed lag (ARDL) technique was employed to examine the co-integration of the factors in the long and short terms. Multiple cointegration techniques were also used to determine the feasibility of a green economy by analyzing the relationship between access to clean fuel for technology and cooking, GDP, and CO₂ emissions. The study's findings indicate a clear long- and short-term relationship between the analyzed factors, as confirmed by the error correction model (ECM) which suggests that the variables are cointegrated and potentially relevant. Additionally, the result of the autoregressive distributed lag bound test shows that the green economy variables, GDP, CO₂ emissions, and access to clean fuel, are cointegrated in the long-term.     

A numerical investigation of three-dimensional falling liquid films

Environmental Fluid Mechanics - In this article, we present a full three-dimensional numerical study of thin liquid films falling on a vertical surface, by solving the full three-dimensional...     

Polymeric Nanocomposite-Based Herbicide of Carboxymethyl Cellulose Coated-Zinc/Aluminium Layered Double Hydroxide-Quinclorac: A Controlled Release Purpose for Agrochemicals

Journal of Polymers and the Environment - In this work, the use of carboxymethyl cellulose (CMC) is highlighted in enhancing the controlled release behaviour of zinc/aluminium layered double...     

A study of heavy metals and their fate in the composting of tannery sludge

Tannery waste is categorized as toxic and hazardous in Malaysia due to its high content of Cr (in excess of 500 mg/kg) and other heavy metals. Heavy metals, when in high enough concentrations, have the potential to be both phytotoxic and zootoxic. Heavy metals are found as contaminants in tannery sludge. This investigation aimed to identify the fate of chromium, cadmium, copper, lead, and zinc concentrations in tannery sludge throughout a 50-day composting cycle. The results of this study showed a general increase in the removal of Cr, Cd, Pb, and to a much smaller extent Zn and Cu, manifested by a decrease in their overall concentrations within the solid fraction of the final product (the decreases were likely the result of leaching). Furthermore, in using a sequential extraction method for sludge composting at different phases of treatment, a large proportion of the heavy metals were found to be associated to the residual fraction (70-80%) and fractions more resistant to extraction, X-NaOH, X-EDTA, X-HNO3 (12-29%). Less than 2% of the metals were bound to bioavailable fractions X-(KNO3+H2O).     

Renewable and non-renewable energy consumption driven sustainable development in ASEAN countries: do financial development and institutional quality matter?

Environmental Science and Pollution Research - Energy consumption for sustainable development has become a crucial issue in recent years. The anthropogenic effects of traditional energy sources...     

Role of religious communities in enhancing transition experiments: a localised strategy for sustainable solid waste management in Malaysia

Religion in its most ideal form is seen as a powerful force to create ecological transformations to succeeding generations that share similar religious beliefs. This provides an interesting argument for enhancing their role in sustainability transitions. Malaysia is a relevant geographical context in this regard since almost all of its citizens formally embrace some kind of religious belief. However, such ideas are discussed mostly at the theoretical level with little systematic empirical investigation. This paper aims to fill this gap by presenting theoretically informed empirical insights on how a number of religious communities are currently creating successful experiments in recycling within the context of an urban community in Malaysia. The paper argues that such evidence may demonstrate the ‘potential’ role of religious communities to provide localised resources for recycling experiments that can be advantageous for the transition towards a more sustainable municipal solid waste management in Malaysia. The empirical basis of this paper is based on an exploratory multiple case study of successful recycling programmes conducted by selected religious communities from four key religions in Malaysia—Buddhism, Christianity, Hinduism and Islam. The theoretical framework for this research is based on the sustainability transitions literature, particularly the ‘transition experiment’ framework.     

Evaluation of the giant reed (<Emphasis Type="Italic">Arundo donax</Emphasis>) in horizontal subsurface flow wetlands for the treatment of recirculating aquaculture system effluent

Introduction

Two emergent macrophytes, Arundo donax and Phragmites australis, were established in experimental subsurface flow, gravel-based constructed wetlands (CWs) receiving untreated recirculating aquaculture system wastewater.

Materials and methods

The hydraulic loading rate was 3.75 cm day^?1. Many of the monitored water quality parameters (biological oxygen demand [BOD], total suspended solids [TSS], total phosphorus [TP], total nitrogen [TN], total ammoniacal nitrogen [TAN], nitrate nitrogen [NO₃], and Escherichia coli) were removed efficiently by the CWs, to the extent that the CW effluent was suitable for use on human food crops grown for raw produce consumption under Victorian state regulations and also suitable for reuse within aquaculture systems.

Results and discussion

The BOD, TSS, TP, TN, TAN, and E. coli removal in the A. donax and P. australis beds was 94%, 67%, 96%, 97%, 99.6%, and effectively 100% and 95%, 87%, 95%, 98%, 99.7%, and effectively 100%, respectively, with no significant difference (p?>?0.007) in performance between the A. donax and P. australis CWs. In this study, as expected, the aboveground yield of A. donax top growth (stems + leaves) (15.0?±?3.4 kg wet weight) was considerably more than the P. australis beds (7.4?±?2.8 kg wet weight). The standing crop produced in this short (14-week) trial equates to an estimated 125 and 77 t ?ha^?1 year^?1 biomass (dry weight) for A. donax and P. australis, respectively (assuming that plant growth is similar across a 250-day (September–April) growing season and a single-cut, annual harvest).

Conclusion

The similarity of the performance of the A. donax- and P. australis-planted beds indicates that either may be used in horizontal subsurface flow wetlands treating aquaculture wastewater, although the planting of A. donax provides additional opportunities for secondary income streams through utilization of the energy-rich biomass produced.

     

Biosafety Act 2007: Does It Really Protect Bioethical Issues Relating To GMOS

Despite the (serious) global concerns about the safety and genetic stability of genetically modified organisms, the Malaysian National Biosafety Board (NBB) has recently approved the field testing for genetically modified (GM) male mosquitoes. With this development, bioethical issues, which in some respect could adversely impinge on the social, economic and environmental aspects of the society, have surfaced, and these concerns must be addressed by the authorities concerned. In reviewing this application, the National Biosafety Board has followed the requirements of the Biosafety Act 2007, which was created to strike a balance between promoting biotechnology and at the same time protecting against its potential environmental and human health risks in Malaysia. However, the 2007 Act fails to adequately take into account any bioethical issues in spite of the inclusion of a provision on socio-economic consideration. As part of an ongoing doctoral research project, and by way of an instrumental critique of the 2007 Act, the present paper attempts to address the role and function of the Malaysia biosafety legal framework in governing bioethical concerns relating to Genetically Modified Organisms (GMOs) within the current biotechnology background in Malaysia. Additionally, the paper suggests that the ambiguity of the provisions contained within the 2007 Act in governing such concerns, representing wider societal interests and welfare, in some ways might defeat the balancing role that this act was originally intended to fulfil.     

The impact of storm events on a riverbed system and its hydraulic conductivity at a site of induced infiltration

The spatial and temporal variability of riverbed vertical hydraulic conductivity (K(v)) was investigated at a site of induced infiltration, associated with a municipal well field, to assess the impact of high-stage events on scour and subsequently the riverbed K(v). Such impacts are important when considering the potential loss of riverbank filtration capacity due to storm events. The study site, in and along the Great Miami River in southwest Ohio, overlaid a highly productive glacial-outwash aquifer. A three-layer model for this system was conceptualized: a top layer of transient sediment, a second layer comprising large sediment resistant to scour, but clogged with finer sediment (the armor/colmation layer), and a third layer that was transitional to the underlying higher-K(v) aquifer. One location was studied in detail to confirm and quantify the conceptual model. Methods included seepage meters, heat-flow modeling, grain-size analyses, laboratory permeameter tests, slug tests and the use of scour chains and pressure-load cells to directly measure the amount of sediment scour and re-deposition. Seepage meter measured riverbed K(v) ranged from 0.017 to 1.7 m/d with a geometric mean of 0.19 m/d. Heat-transport model-calibrated estimates were even lower, ranging from 0.0061 to 0.046 m/d with a mean of 0.017 m/d. The relatively low K(v) was indicative of the clogged armor layer. In contrast, slug tests in the underlying riverbed sediment yielded K(v) values an order of magnitude greater. There was a linear relationship between scour chain measured scour and event intensity with a maximum scour of only 0.098 m. Load-cell pressure sensor data over a 7-month period indicated a total sediment-height fluctuation of 0.42 m and a maximum storm-event scour of 0.28 m. Scour data indicated that the assumed armor/colmation layer almost always remained intact. Based on measured layer conductivities and thicknesses, the overall K(v) of this conceptualized system was 1.6 m/d. Sensitivity analyses indicated that even complete scour of the armor/colmation layer would likely increase the overall K(v) only by a factor of 1.5. Most scour events observed removed only the transient sediment, having very little effect on the entire system indicating low risk of losing filtration capacity during storms. The research, however, focused on the point bar, depositional side of the river. More research of the entire river profile is necessary.