Climate change and natural disasters: macroeconomic performance and distributional impacts

Commonly occurring natural events become natural disasters when they affect the population through death and injury, and/or through the destruction of natural and physical capital on which people rely for their livelihood and quality of life. Climate change plays a role in that it tends to increase the frequency and intensity of weather-related natural disasters. Additionally, climate change may put people at risk by influencing access to water, coastal flooding, disease and hunger, and leaving them with a more degraded environment, leading, in turn, to increased vulnerability. The purpose of this paper is to present a review and synthesis of the literature and case studies addressing differential impacts of climate change-related natural disasters on a society and its economy. Developed and developing countries show different vulnerabilities to natural disasters. Even within countries, impacts vary significantly across population and economic sectors. When losses from natural disasters are large, their cumulative effect can have notable macroeconomic impacts, which feed back to further pronounce existing income inequalities and lower income levels. Impacts tend to be most pronounced for women, the young and elderly, and people of ethnic or racial minorities.

Radiological monitoring: terrestrial natural radionuclides in Kinta District,Perak, Malaysia

Natural background gamma radiation and radioactivity concentrations were investigated from 2003 to 2005 in Kinta District, Perak, Malaysia. Sample locations were distant from any ‘amang’ processing plants. The external gamma dose rates ranged from 39 to 1039 nGy h⁻¹. The mean external gamma dose rate was 222 ± 191 nGy h⁻¹. Small areas of relatively enhanced activity were located having external gamma dose rates of up to 1039 ± 104 nGy h⁻¹. The activity concentrations of ²³⁸U, ²³²Th and ⁴⁰K were analyzed by using a high-resolution co-axial HPGe detector system. The activity concentration ranges were 12–426 Bq kg⁻¹ for ²³⁸U, 19–1377 Bq kg⁻¹ for ²³²Th and <19–2204 Bq kg⁻¹ for ⁴⁰ K. Based on the radioactivity levels determined, the gamma-absorbed dose rates in air at 1 m above the ground were calculated. The calculated dose rates and measured dose rates had a good correlation coefficient, R of 0.94. To evaluate the radiological hazard of the natural radioactivity, the radium equivalent activity, the gamma-absorbed dose rate and the mean population weighted dose rate were calculated. An isodose map for the Kinta District was also produced.     

Soil redistribution rate and its relationship with soil organic carbon and total nitrogen using Cs technique in a cultivated complex hillslope in western Iran

The spatial pattern of soil redistribution rate was investigated using cesium-137 (¹³⁷Cs) within a cultivated complex hillslope in western Iran. The relationship between soil redistribution rate and soil organic carbon and total nitrogen pattern were studied using co-regionalization analysis. Ninety-one soil cores were sampled for ¹³⁷Cs, total nitrogen, and soil organic carbon measurements. The simplified mass balance model estimated a gross erosion rate of 29.8 t ha⁻¹ yr⁻¹ and a net soil deposition rate of 21.8 t ha⁻¹ yr⁻¹; hence, a net soil loss rate of 8 t ha⁻¹ yr⁻¹. This magnitude of soil erosion rate is higher than the acceptable rate in semiarid regions. Co-regionalization analysis and co-dispersive coefficients among the selected variables showed that only a small fraction of the variability in total nitrogen and soil organic carbon could be explained by soil redistribution and that the remaining might be the result of different management practices by local farmers.     

CO2 removal using membrane gas absorption

The objective of this study is to investigate the potential process for the removal of carbon dioxide (CO₂) from flue gas using fundamental membrane contactor, which is a membrane gas absorption (MGA) system. The experiments consisted of microporous polyvinylidenefluoride (PVDF) flat sheet membrane with 0.1 μm (as module I) and 0.45 μm (as module II) pore size. 2-Amino-2-methyl-1-propanol (AMP) solution was employed as the liquid absorbent. The effect of AMP concentration was studied with variation in the range 1–5 M. In addition, the experiments were carried out with 10%, 20%, 30% and 40% gas ratio of CO₂ to N₂ and pure CO₂ as well. Through contact angle measurement, membranes for module I and module II were obtained with CA values of around 130.25° and 127.77°, respectively. The mass transfer coefficients for module II are lower than those of module I for 1–5 M of AMP. Furthermore, the increase in CO₂ concentration in the feed gas stream enhanced the CO₂ flux as the driving force of the system was increased in sequence from 1 M to 5 M of AMP. However, after the particular percentage (40%) of CO₂ inlet concentration, the CO₂ fluxes seem saturated. The combination of AMP as liquid absorbent and PVDF microporous membrane in MGA system has shown the potential to remove the CO₂ from flue gas. In addition, the higher AMP concentration gave higher mass transfer coefficient at low liquid flow rates.     

Exposure assessment for trace elements from consumption of marine fish in Southeast Asia

Concentrations of 20 trace elements were determined in muscle and liver of 34 species of marine fish collected from coastal areas of Cambodia, Indonesia, Malaysia and Thailand. Large regional difference was observed in the levels of trace elements in liver of one fish family (Carangidae): the highest mean concentration was observed in fish from the Malaysian coastal waters for V, Cr, Zn, Pb and Bi and those from the Java Sea side of Indonesia for Sn and Hg. To assess the health risk to the Southeast Asian populations from consumption of fish, intake rates of trace elements were estimated. Some marine fish showed Hg levels higher than the guideline values by U.S. Environmental Protection Agency and Joint FAO/WHO Expert Committee on Food Additives (JECFA). This suggests that consumption of these fish may be hazardous to the people.     

Remediation of RDX- and HMX-contaminated groundwater using organic mulch permeable reactive barriers

Organic mulch is a complex organic material that is typically populated with its own consortium of microorganisms. The organisms in mulch breakdown complex organics to soluble carbon, which can then be used by these and other microorganisms as an electron donor for treating RDX and HMX via reductive pathways. A bench-scale treatability study with organic mulch was conducted for the treatment of RDX- and HMX-contaminated groundwater obtained from a plume at the Pueblo Chemical Depot (PCD) in Pueblo, Colorado. The site-specific cleanup criteria of 0.55 ppb RDX and 602 ppb HMX were used as the logical goals of the study. Column flow-through tests were run to steady-state at the average site seepage velocity, using a 70%:30% (vol.:vol.) mulch:pea gravel packing to approach the formation's permeability. Significant results included: (1) Complete removal of 90 ppb influent RDX and 8 ppb influent HMX in steady-state mulch column effluent; (2) pseudo-first-order steady-state kinetic rate constant, k, of 0.20 to 0.27 h(-1) based on RDX data, using triplicate parallel column runs; (3) accumulation of reduced RDX intermediates in the steady-state column effluent at less than 2% of the influent RDX mass; (4) no binding of RDX to the column fill material; and (5) no leaching of RDX, HMX or reduction intermediates from the column fill material. The results of the bench-scale study will be used to design and implement a pilot-scale organic mulch/pea gravel permeable reactive barrier (PRB) at the site.     

Implications of depletion of groundwater levels in three layered aquifers and its management to optimize the supply demand in the urban settlement near Kahota Industrial Triangle area, Islamabad, Pakistan

This study deals with the implications of depletion of groundwater levels in three layered aquifers and its management to optimize the supply demand in the urban settlement near Kahota Industrial Triangle area, located adjacent to the Soan River, Islamabad Pakistan. Initially, a groundwater 3-D steady-state flow model has been developed, calibrated to the known observed heads of 24 water wells, verified, and confirmed that convergence has actually arrived and hydraulic heads are no more changing. Later, the transient simulation was carried out with the constant discharge rates of groundwater by means of pumping wells, storage factor, porosity, and observed drawdown matched with the simulated drawdown that appears to fall in close agreement with a difference of 0.25 m. As such, the developed groundwater model has facilitated to understand, evaluate, and to predict regional trends of groundwater flow regimes and their ultimate utilization at a maximum rate of 4.5 million gallons/day for the growing urban settlement. The calibrated and verified model was then used to simulate the depletion of groundwater level, annual water balance, discharge versus time drawdown, and a temporal behavior of the system over an extended period of pumping. The modeling results indicate that, due to the pumping, the direction of flow has changed: first from groundwater regimes to the Soan River and then it is entirely reversed from the Soan River to the groundwater regimes as the drawdown started to deepen.     

Monitoring results for organochlorine pesticides in soil and water from selected obsolete pesticide stores in Pakistan

Seasonal changes in micromineral and macromineral concentrations in tissues of shrimp (Parapenaus longirostris) from Marmara Sea were measured for a 1-year period by using inductively coupled plasma mass spectrometer. The contents of investigated minerals in shrimp were found to be in the range of 0.374–0.716 mg/kg for Hg, 0.526–1.286 mg/kg for Se, 0.007–0.098 mg/kg for Cd, 0.197–0.230 mg/kg for Pb, 5.194–7.600 mg/kg for Cu, 11.090–17.707 mg/kg for Zn, 22.128–38.850 mg/kg for Al, 61.769–88.437 mg/kg for Fe, 0.262–0.368 mg/kg for As, 0.081–0.249 mg/kg for Co, 0.850–1.459 mg/kg for Mn, 0.316–0.507 mg/kg for Ni, 0.032–0.107 mg/kg for Sn, 1.262–1.502 mg/kg for Cr, 2,813.770–3,317.819 mg/kg for Na, 3,702.230–4,479.648 mg/kg for K, 495.782–650.280 mg/kg for Mg, 790.407–1,016.112 mg/kg for Ca, 2,685.873–3,657.658 mg/kg for P, and 0.454–0.942 mg/kg for I. The levels of Hg found in autumn were higher than maximum levels proposed by the European legislation.     

Indoor air pollution evaluation with emphasize on HDI and biological assessment of HDA in the polyurethane factories

Today, many raw materials used in factories may have a dangerous effect on the physiological system of workers. One of them which is widely used in the polyurethane factories is diisocyanates. These compounds are widely used in surface coatings, polyurethane foams, adhesives, resins, elastomers, binders, and sealants. Exposure to diisocyanates causes irritation to the skin, mucous membranes, eyes, and respiratory tract. Hexamethylene diamine (HDA) is metabolite of hexamethylene diisocyanate (HDI). It is an excretory material by worker’s urine who is exposed to HDI. Around 100 air samples were collected from five defined factories by midget impinger which contained dimethyl sulfoxide absorbent as a solvent and tryptamine as reagent. Samples were analyzed by high-performance liquid chromatography with EC\UV detector using NIOSH 5522 method of sampling. Also, 50 urine samples collected from workers were also analyzed using William’s biological analysis method. The concentration of HDI into all air samples were more than 88 xxxμg/m³, and they have shown high concentration of pollutant in the workplaces in comparison with NIOSH standard, and all of the workers’ urine were contaminated by HDA. The correlation and regression test were used to obtain statistical model for HDI and HDA, which is useful for the prediction of diisocyanates pollution situation in the polyurethane factories.     

Assessment of the impact of petroleum and petrochemical industries to the surrounding areas in Malaysia using mosses as bioindicator supported by multivariate analysis

Biomonitoring of multi-element atmospheric deposition using terrestrial moss is a well-established technique in Europe. Although the technique is widely known, there were very limited records of using this technique to study atmospheric air pollution in Malaysia. In this present study, the deposition of 11 trace metals surrounding the main petroleum refinery plant in Kerteh Terengganu (eastern part of peninsular Malaysia) has been evaluated using two local moss species, namely Hypnum plumaeforme and Taxithelium instratum as bioindicators. The study was also done by means of observing whether these metals are attributed to work related to oil exploration in this area. The moss samples have been collected at 30 sampling stations in the vicinity of the petrochemical industrial area covering up to 15 km to the south, north, and west in radius. The contents of heavy metal in moss samples were analyzed by energy dispersive x-ray fluorescence technique. Distribution of heavy metal content in all mosses is portrayed using Surfer software. Areas of the highest level of contaminations are highlighted. The results obtained using the principal components analysis revealed that the elements can be grouped into three different components that indirectly reflected three different sources namely anthropogenic factor, vegetation factor, and natural sources (soil dust or substrate) factor. Heavy metals deposited mostly in the distance after 9 km onward to the western part (the average direction of wind blow). V, Cr, Cu, and Hg are believed to have originated from local petrochemical-based industries operated around petroleum industrial area.