Fast and complete removal of the 5-fluorouracil drug from water by electro-Fenton oxidation

Cytostatic drugs are a troublesome class of emerging pollutants in water owing to their potential effects on DNA. Here we studied the removal of 5-fluorouracil from water using the electro-Fenton process. Galvanostatic electrolyses were performed with an undivided laboratory-scale cell equipped with a boron-doped diamond anode and a carbon felt cathode. Results show that the fastest degradation and almost complete mineralization was obtained at a Fe²⁺ catalyst concentration of 0.2 mM. The absolute rate constant for oxidation of 5-fluorouracil by hydroxyl radicals was 1.52 × 10⁹ M^?1 s^?1. Oxalic and acetic acids were initially formed as main short-chain aliphatic by-products, then were completely degraded. After 6 h the final solution mainly contained inorganic ions (NH₄ ⁺, NO₃ ^? and F^?) and less than 10% of residual organic carbon. Hence, electro-Fenton constitutes an interesting alternative to degrade biorefractory drugs.     

Contribution of the gasoline distribution cycle to volatile organic compound emissions in the metropolitan area of Mexico City

Gasoline distribution in the metropolitan area of Mexico City (MAMC) represents an area of opportunity for the abatement of volatile organic compound (VOC) emissions. The gasoline distribution in this huge urban center encompasses several operations: (1) storage in bulk and distribution plants, (2) transportation to gasoline service stations, (3) unloading at service stations' underground tanks, and (4) gasoline dispensing. In this study, hydrocarbon (HC) emissions resulting from breathing losses in closed reservoirs, leakage, and spillage from the operations just listed were calculated using both field measurements and reported emission factors. The results show that the contribution of volatile HC emissions due to storage, distribution, and sales of gasoline is 6651 t/year, approximately 13 times higher than previously reported values. Tank truck transportation results in 53.9% of the gasoline emissions, and 31.5% of emissions are generated when loading the tank trucks. The high concentration of emissions in the gasoline transportation and loading operations by tank trucks has been ascribed to (1) highly frequent trips from distribution plant to gasoline stations, and vice versa, to cope with excessive gasoline sales per gasoline station; (2) low leakproofness of tank trucks; and (3) poor training of employees. In addition, the contribution to HC evaporative and exhaust emissions from the vehicles of the MAMC was also evaluated.     

Removal of the herbicide amitrole from water by anodic oxidation and electro-Fenton

Here we demonstrate that an aqueous solution of the herbicide amitrole can be completely depolluted at pH 3.0 by anodic oxidation and electro-Fenton process. Anodic oxidation gives faster degradation with a boron-doped diamond anode than with a Pt anode. Electro-Fenton with a Pt anode and 1 mmol l ^–1 Fe²⁺ as catalyst yields the quickest depollution. Amitrole decay always follows a pseudo first-order reaction. NO₃^– and NH₄⁺ are accumulated in the medium during mineralization, although volatile N-products are also formed. These environmentally friendly electrochemical treatments could be applied to the remediation of wastewaters containing amitrole.     

Relationship between neuropsychological tests and driver's license renewal tests in Parkinson's disease

Objective: To determine whether the standard Spanish driving test (ASDE test) was able to identify patients with Parkinson's disease (PD) at risk of unsafe driving and to examine the relationship between the ASDE test and the Useful Field of View (UFOV) as well as with a battery of neuropsychological tests in drivers with PD.

Methods: Thirty-seven patients with PD and 33 controls matched by age and education level were included in an observational study. All participants were active drivers and patients with PD underwent study procedures after taking the medication in the “on” period. Subjects with a Mini-Mental State Examination (MMSE) score ≤ 24 were excluded. Neuropsychological tests (Repeatable Battery for Neuropsychological Status [RBANS], Trail Making Test [TMT-A and -B], and Block Design test), driving performance tests (ASDE Driver Test and UFOV), and daytime sleepiness (Epworth Sleepiness Scale) were assessed.

Results: The PD group performed significantly worse than healthy controls in the ASDE Motor Coordination tests. No significant differences were observed in anticipation speed, multiple reaction time, concentrated attention, and resistance to monotony. All participants successfully completed the UFOV tests. Statistically significant differences between patients with PD and controls were found in processing speed (UFOV1; P =.03) and more patients with PD were found in the categories of higher driving risk levels (P =.03). In addition, patients with PD showed worse scores than healthy controls in visuospatial capacities (Line Orientation), psychomotor speed (Coding and TMT-A), memory (List Recognition, Story Recall), and executive function (TMT-B). The driving tests (ASDE and UFOV) showed a low sensitivity and a high specificity but a higher percentage of patients in the PD group failed in multiple reaction time, concentrated attention, and resistance to monotony. In addition, 18.9% of patients with PD showed a cutoff of 4 for UFOV risk. In the discriminant analysis, Line Orientation (visuospatial/constructive domain) and Figure Recall (delayed memory) were found to be statistically significant with a rate of correct classification of unsafe drivers with PD of 78.2%. In addition, normal results on the Line Orientation item were associated with a 1.5 times higher probability of non-risky driving in the multivariate analysis.

Conclusions: At early stages of the disease, about 19% of patients with PD showed difficulties that may affect their driving capabilities. Line Orientation and Figure Recall are useful to alert clinicians to the risk of unsafe driving. For this reason, patients with PD should be evaluated for driving abilities more regularly to determine the extent of deficits that may influence driving performance.     

Efficient removal of triphenylmethane dyes from aqueous medium by in situ electrogenerated Fenton's reagent at carbon-felt cathode

Fenton's reagent (Fe2+ +H2O2) has been electrogenerated in situ in an undivided electrolytic cell from the effective reduction of Fe3+ and O2 at carbon-felt cathode for the treatment of aqueous solutions of four triphenylmethane dyes (TPMs), namely malachite green (MG), crystal violet (CV), methyl green (MeG) and fast green FCF (FCF), at pH 3.0 and room temperature. MG has been used as a model among them to study the influence of some experimental parameters on the decay kinetics, COD removal and current efficiency. The results in such electro-Fenton system are explained in terms of the many parasitic reactions involving .OH. Higher efficiency values are obtained with rising organic content and decreasing applied current. The first stage of the mineralization process, involving aromatic by-products, leads to fast decoloration as well as quick initial COD removal that fit well to a pseudo-first-order kinetics. At prolonged electrolysis time, the mineralization rate and efficiency decrease due to the formation of hardly oxidizable compounds and the enhancement of wasting reactions. Solutions of all four TPMs are quickly degraded following a pseudo-first-order decay kinetics. The absolute rate constant (kTPM) for their reaction with .OH increases in the order MeG相似文献   

Mineralization of paracetamol in aqueous medium by anodic oxidation with a boron-doped diamond electrode

The degradation of 100ml of solutions with paracetamol (N-(4-hydroxyphenyl)acetamide) up to 1 g l(-1) in the pH range 2.0-12.0 has been studied by anodic oxidation in a cell with a boron-doped diamond (BDD) anode and a graphite cathode, both of 3-cm2 area, by applying a current of 100, 300 and 450 mA between 25 and 45 degrees C. Complete mineralization is always achieved due to the great concentration of hydroxyl radical (*OH) generated at the BDD surface, with release of NH4+ and NO3- ions. The mineralization rate is pH-independent, increases with increasing applied current and temperature, but decreases when drug concentration raises from 315 mg l(-1). Reversed-phase chromatography revealed a similar complex paracetamol decay in acid and alkaline media. Ion-exclusion chromatography allowed the detection of oxalic and oxamic acids as ultimate carboxylic acids. When the same solutions have been comparatively treated with a Pt anode, a quite poor mineralization is found because of the production of much lower *OH concentration. Under these conditions, the degradation rate is enhanced in alkaline medium and polymerization of intermediates is favored in concentrated solutions. Paracetamol can be completely destroyed with Pt and its kinetics follows a pseudo-first-order reaction with a constant rate independent of pH.     

Building waste management core indicators through Spatial Material Flow Analysis: Net recovery and transport intensity indexes

In this paper, the material and spatial characterization of the flows within a municipal solid waste (MSW) management system are combined through a Network-Based Spatial Material Flow Analysis. Using this information, two core indicators are developed for the bio-waste fraction, the Net Recovery Index (NRI) and the Transport Intensity Index (TII), which are aimed at assessing progress towards policy-related sustainable MSW management strategies and objectives. The NRI approaches the capacity of a MSW management system for converting waste into resources through a systematic metabolic approach, whereas the TII addresses efficiency in terms of the transport requirements to manage a specific waste flow throughout the entire MSW management life cycle. Therefore, both indicators could be useful in assessing key MSW management policy strategies, such as the consecution of higher recycling levels (sustainability principle) or the minimization of transport by locating treatment facilities closer to generation sources (proximity principle). To apply this methodological approach, the bio-waste management system of the region of Catalonia (Spain) has been chosen as a case study. Results show the adequacy of both indicators for identifying those points within the system with higher capacity to compromise its environmental, economic and social performance and therefore establishing clear targets for policy prioritization. Moreover, this methodological approach permits scenario building, which could be useful in assessing the outcomes of hypothetical scenarios, thus proving its adequacy for strategic planning.     

UV-C light-enhanced photo-Fenton oxidation of methyl parathion

The photodegradation of aqueous solutions containing 0.2 mM methyl parathion has been studied through the optimization of the [H₂O₂]/[Fe³⁺] ratio in a Fe³⁺/H₂O₂/UV-C flow system of 1.3 L capacity. The decay kinetics and TOC abatement have been analyzed for the experiments performed at pH 3.0 and room temperature. All experiments lead to the total methyl parathion destruction after a few minutes, following a pseudo-first-order decay kinetics. Total mineralization can be reached after 120 min at the optimum ratio found, due to the synergistic effect of the very oxidizing hydroxyl radical (^·OH) produced via the Fenton reagent and the effective photodecarboxylation at 253.7 nm.     

Improving the Fenton process by visible LED irradiation

The effect of irradiation with visible light-emitting diode (LED) light on the efficiency of Fenton oxidation is investigated using phenol as the target compound (100 mg/L). The H₂O₂ dose and temperature are tested as operating variables with the aim of minimizing consumption of the reagents. At 50 °C, 10 mg/L Fe²⁺, and 60 % of the stoichiometric H₂O₂ amount, phenol was completely oxidized into CO₂, H₂O, and short chain organic acids, with oxalic acid completely degraded. Up to 95 % mineralization was achieved. This high efficiency can be attributed to the effect of LED radiation on the quinones/Fe²⁺/Fe³⁺/H₂O₂ cycle, which significantly increases the reaction rate, as well as on the photodecomposition of the iron complexes formed along the oxidation process, which also enhanced mineralization.