Performance of compostable baby used diapers in the composting process with the organic fraction of municipal solid waste

In modern societies, disposable diapers constitute a significant percentage of municipal solid wastes. They have been traditionally landfilled or incinerated as only limited recycling processes are being implemented in some parts of Europe. With the implementation of separated collection systems for the organic fraction of municipal solid wastes (OFMSWs) and the need to preserve the environment, compostable diapers have appeared in the market to avoid the main environmental impacts associated to non-biodegradable disposable diapers. In this study, a full-scale composting of door-to-door collected OFMSW with a 3% (w/w) of compostable diapers has also been carried out. Previously, lab-scale experiments confirmed that almost 50% of carbon of compostable diapers is emitted as CO₂ under aerobic controlled conditions. The results obtained at full-scale demonstrate that both the composting process and the final end product (compost) are not altered by the presence of compostable diapers in crucial aspects such as pathogenic content, stability and elemental composition (including nutrients and heavy metals). The main conclusion of this study is that the collection of the OFMSW with compostable diapers can be a new way to transform this waste into high-quality compost.     

Photoelectro-Fenton treatment of pesticide triclopyr at neutral pH using Fe(III)–EDDS under UVA light or sunlight

Environmental Science and Pollution Research - One of the main challenges of electrochemical Fenton-based processes is the treatment of organic pollutants at near-neutral pH. As a potential...     

Cap and trade schemes on waste management: A case study of the Landfill Allowance Trading Scheme (LATS) in England

The Landfill Allowance Trading Scheme (LATS) is one of the main instruments used in England to enforce the landfill diversion targets established in the Directive 1999/31/EC of the European Parliament and of the Council of 26 April 1999 on the landfill of waste (Landfill Directive). Through the LATS, biodegradable municipal waste (BMW) allowances for landfilling are allocated to each local authority, otherwise known as waste disposal authorities (WDAs). The quantity of landfill allowances received is expected to decrease continuously from 2005/06 to 2019/20 so as to meet the objectives of the Landfill Directive. To achieve their commitments, WDAs can exchange, buy, sell or transfer allowances among each other, or may re-profile their own allocation through banking and/or borrowing. Despite the goals for the first seven years – which included two target years (2005/06 and 2009/10) – being widely achieved (the average allocation of allowances per WDA was 22.9% higher than those finally used), market activity among WDAs was high and prices were not very stable. Results in terms of waste reduction and recycling levels have been satisfactory. The reduction of BMW landfilled (in percentage) was higher during the first seven years of the LATS period (2005/06–2011/12) (around 7% annually) than during the previous period (2001/02–2004/05) (4.2% annually). Since 2008, the significance of the LATS diminished because of an increase in the rate of the UK Landfill Tax. The LATS was suppressed after the 2012/13 target year, before what it was initially scheduled. The purpose of this paper is to describe the particularities of the LATS, analyse its performance as a waste management policy, make a comparison with the Landfill Tax, discuss its main features as regards efficiency, effectiveness and the application of the “polluter pays” principle and finally discuss if the effect of the increase in the Landfill Tax is what made the LATS ultimately unnecessary.     

Adjustment of female reproductive investment according to male carotenoid-based ornamentation in a gallinaceous bird

Carotenoid-based ornaments (many yellow–orange–red colourations) may signal the genetic or parental quality of the bearer. Thus, their expression could influence the amount of resources/energy that the mate will invest in the production of offspring, thereby optimising its reproductive fitness. The differential allocation hypothesis (DAH) predicts that females mated with more attractive males should lay more and better eggs. This has been explored only in few bird species with carotenoid-based traits. We tested this hypothesis in the red-legged partridge (Alectoris rufa), a gallinacean with very variable laying capacity. Both sexes display carotenoid-based ornamentation that gradually fades throughout the laying period. Here, the redness of beak and eye rings of captive males was intensified after mating by means of paint. The proportion of females that laid eggs did not differ between treatments. Amongst laying females, those mated with colour-enhanced males (experimental females) tended to lay earlier and produced significantly more eggs than controls, but of similar quality (egg mass and composition). We additionally investigated whether male attractiveness influenced egg components depending on the clutch size and laying sequence. The testosterone level in eggs from experimental females was positively related to the laying order, whereas control eggs did not show any trend. Our results provided mixed support for the DAH, but nevertheless revealed that female red-legged partridges may adjust their breeding investment according to male carotenoid-based ornamentation.     

Measurement of copepod predation on nauplii using qPCR of the cytochrome oxidase I gene

A method to directly measure predation rates by older stage copepods upon copepod nauplii using species-specific primers for the mitochondrial cytochrome oxidase subunit one gene (mtCOI) and real-time quantitative PCR (qPCR) was developed. The general approach is to determine the mtCOI gene copy number of an individual prey organism and the copy number of the same gene in the stomachs of predatory copepods collected in the field. From the knowledge of DNA disappearance rates in the stomachs, ingestion rates can be calculated. In October 2006, laboratory experiments were carried out with Acartia tonsa N1 and N2 as prey and adult female Centropages typicus as predator. The copepods were collected in Narragansett Bay, USA. A. tonsa mtCOI copy numbers copepod⁻¹ were determined for stages N1–C1 and for adults. A. tonsa DNA was detectable in the guts of the predators for as long as 3 h. Exponential rates of decline in prey DNA from the stomachs of the predators are similar to those measured for gut pigments. Because of the very small amount of DNA in an individual N1 or N2 nauplius, procedures were developed to maximize the quantitative extraction and recovery of DNA and to increase the sensitivity of the method. Two quite divergent haplotypes of A. tonsa were found in Narragansett Bay, which required separate qPCR primers; one was present in summer (July) and the other in fall and winter (October and February). With modification, the methods in this study can likely be applied to a range of predator–prey systems.     

Kinetics of imidazolium-based ionic liquids degradation in aqueous solution by Fenton oxidation

In the last few years, several works dealing with Fenton oxidation of ionic liquids (ILs) have proved the capability of this technology for their degradation, achieving complete ILs removal and non-toxic effluents. Nevertheless, very little is known about the kinetics of this process, crucial for its potential application. In this work, the effect of several operating conditions, including reaction temperature (50–90 °C), catalyst load (10–50 mg L^?1 Fe³⁺), initial IL concentration (100–2000 mg L^?1), and hydrogen peroxide dose (10–200% of the stoichiometric amount for the complete IL mineralization) on 1-butyl-3-methylimidazolium chloride ([C₄mim]Cl) oxidation has been investigated. Under the optimum operating conditions (T = 90 °C; [Fe³⁺]₀ = 50 mg L^?1; [H₂O₂]₀ = 100% of the stoichiometric amount), the complete removal of [C₄mim]Cl (1000 mg L^?1) was achieved at 1.5-min reaction time. From the experimental results, a potential kinetic model capable to describe the removal of imidazolium-based ILs by Fenton oxidation has been developed. By fitting the proposed model to the experimental data, the orders of the reaction with respect to IL initial concentration, Fe³⁺ amount and H₂O₂ dose were found to be close to 1, with an apparent activation energy of 43.3 kJ mol^?1. The model resulted in a reasonable fit within the wide range of operating conditions tested in this work.     

Exploring the potential of applying proteomics for tracking bisphenol A and nonylphenol degradation in activated sludge

A significant percentage of bisphenol A and nonylphenol removal in municipal wastewater treatment plants relies on biodegradation. Nonetheless, incomplete information is available concerning their degradation pathways performed by microbial communities in activated sludge systems. Hydroquinone dioxygenase (HQDO) is a specific degradation marker enzyme, involved in bisphenol A and nonylphenol biodegradation, and it can be produced by axenic cultures of the bacterium Sphingomonas sp. strain TTNP3. Proteomics, a technique based on the analysis of microbial community proteins, was applied to this strain. The bacterium proteome map was obtained and a HQDO subunit was successfully identified. Additionally, the reliability of the applied proteomics protocol was evaluated in activated sludge samples. Proteins belonging to Sphingomonas were searched at decreasing biomass ratios, i.e. serially diluting the bacterium in activated sludge. The protein patterns were compared and Sphingomonas proteins were discriminated against the ones from sludge itself on 2D-gels. The detection limit of the applied protocol was defined as 10^?3 g TTNP3 g^?1 total suspended solids (TSSs). The results proved that proteomics can be a promising methodology to assess the presence of specific enzymes in activated sludge samples, however improvements of its sensitivity are still needed.     

Degradation of clofibric acid in acidic aqueous medium by electro-Fenton and photoelectro-Fenton

Acidic aqueous solutions of clofibric acid (2-(4-chlorophenoxy)-2-methylpropionic acid), the bioactive metabolite of various lipid-regulating drugs, have been degraded by indirect electrooxidation methods such as electro-Fenton and photoelectro-Fenton with Fe(2+) as catalyst using an undivided electrolytic cell with a Pt anode and an O(2)-diffusion cathode able to electrogenerate H(2)O(2). At pH 3.0 about 80% of mineralization is achieved with the electro-Fenton method due to the efficient production of oxidant hydroxyl radical from Fenton's reaction between Fe(2+) and H(2)O(2), but stable Fe(3+) complexes are formed. The photoelectro-Fenton method favors the photodecomposition of these species under UVA irradiation, reaching more than 96% of decontamination. The mineralization current efficiency increases with rising metabolite concentration up to saturation and with decreasing current density. The photoelectro-Fenton method is then viable for treating acidic wastewaters containing this pollutant. Comparative degradation by anodic oxidation (without Fe(2+)) yields poor decontamination. Chloride ion is released during all degradation processes. The decay kinetics of clofibric acid always follows a pseudo-first-order reaction, with a similar rate constant in electro-Fenton and photoelectro-Fenton that increases with rising current density, but decreases at greater metabolite concentration. 4-Chlorophenol, 4-chlorocatechol, 4-chlororesorcinol, hydroquinone, p-benzoquinone and 1,2,4-benzenetriol, along with carboxylic acids such as 2-hydroxyisobutyric, tartronic, maleic, fumaric, formic and oxalic, are detected as intermediates. The ultimate product is oxalic acid, which forms very stable Fe(3+)-oxalato complexes under electro-Fenton conditions. These complexes are efficiently photodecarboxylated in photoelectro-Fenton under the action of UVA light.     

Diclofenac photodegradation with the Perovskites BaFeyTi1-yO3 as catalysts

Environmental Science and Pollution Research - Perovskite oxides BaFeyTi1-yO3, with y = 0, 0.6, 0.8 and 1, were prepared by ceramic (CM) and complex polymerization methods (CPM) and utilized in...