Characteristics of mercury emission from linear type of spent fluorescent lamp

In order to recycle the linear type of SFL (spent fluorescent lamp), mercury from SFL should be controlled to prevent leaking into the environment. For mercury emission from SFL, mercury concentration is estimated in the parts of SFL such as glass tube, phosphor powder, and base cap using the end-cutting unit. It is also evaluated mercury emission in the effluent gas in the end-cutting unit with changing flow rate. From the results of mercury emission from SFLs, phosphor powder has greater than 80% of mercury amount in SFL and about 15% of mercury amount contained in glass tube. The initial mercury concentration in vapor phase is almost decreased linearly with increasing airflow rate from 0.7 L/min to 1.3 L/min. It is desirable that airflow rate should be high until the concentration of mercury vapor will be stable because the stabilized concentration becomes to be low and the stabilized time goes to be short as increased airflow rate. From KET and TCLP results, finally, phosphor powder should be managed as a hazardous waste but base-cap and glass are not classified as hazardous wastes.     

Polychlorinated biphenyls (PCB) and dichlorodiphenyltrichloroethane (DDE) air concentrations in the Lake Ontario region: Trends and potential sources

Airborne particle and gas samples were collected approx every 12 days from April 2002 to June 2006 at the Sterling Nature Center located near the southeast corner of Lake Ontario. These samples were analyzed for polychlorinated biphenyls (PCBs) and dichlorodiphenyltrichloroethane (DDE). Clausius-Clapeyron (C–C) regression analyses of PCBs and DDE yielded moderate correlations (r² = 0.54, p < 0.001; r² = 0.74, p < 0.001, respectively) indicating that much of the variations in concentrations can be explained by temperature. Back trajectory analysis indicated that the most important factors driving unusually high PCB partial pressures relative to those predicted by the C–C regression were slow wind speeds and winds generally from the southwest. This combination, which occurred frequently in 2004, increased contact of the air with contaminated upwind surfaces with minimum dilution. Hybrid receptor modeling (Potential Source Contribution Function (PSCF)) results for the total PCBs identified the midwestern US region that contains the urban areas of southern Indiana (IN), southwestern Ohio (OH), and northern Kentucky (KY) having the highest PSCF values. In general urban areas like Chicago (IL), Detroit (MI), Cleveland (OH), St. Louis (MO), and Nashville (TN) also had significant possibilities. In contrast, the PSCF modeling for DDE identified northern Alabama as the area with the highest probability where DDT was applied to cotton fields.     

Mercury (Hg) emissions from domestic biomass combustion for space heating

Three mercury (Hg) species (gaseous elemental mercury (GEM), gaseous oxidized mercury (GOM), and fine particulate-bound mercury (PBM_2.5)) were measured in the stack of a small scale wood combustion chamber at 400 °C, in the stack of an advanced wood boiler, and in two areas influenced by wood combustion. The low temperature process (lab-scale) emitted mostly GEM (∼99% when burning wood pellets and ∼95% when burning unprocessed wood). The high temperature wood boiler emitted a greater proportion of oxidized Hg (approximately 65%) than the low temperature system. In field measurements, mean PBM_2.5 concentrations at the rural and urban sites in winter were statistically significantly higher than in warmer seasons and were well correlated with Delta-C concentrations, a wood combustion indictor measured by an aethalometer (UV-absorbable carbon minus black carbon). Overall the results suggest that wood combustion may be an important source of oxidized mercury (mostly in the particulate phase) in northern climates in winter.     

Cyp35a2 gene expression is involved in toxicity of fenitrothion in the soil nematode Caenorhabditis elegans

In this study, the effect of organophosphorous (OP) pesticide, fenitrothion (FT), on the non-target organism was investigated using the soil nematode, Caenorhabditis elegans. Toxicity was investigated on multiple biological levels, from organism to molecular levels, such as, immoblity, growth, fertility, development, acetyl cholinesterase (AChE) activity and stress-response gene expressions. FT may provoke serious consequences on the C. elegans population, as it induced significant developmental disturbance. As expected, FT exposure inhibits AChE activity of C. elegans. The increased expression of the cytochrome p450 family protein 35A2 (cyp35a2) gene was also observed in FT exposed worms. To experimentally demonstrate the relationships between organism-level effects and the cyp35a2 gene expression in FT-exposed C. elegans, the integration of the gene expression with biochemical-, and organism level endpoints were attempted using a C. eleganscyp35a2 RNA interference (RNAi) and cyp35a2 mutant (gk317). The 24 h-EC50s of C. elegans on FT exposure were in the order of cyp35a2 RNAi in cyp35a2 mutant (gk317) > cyp35a2 mutant (gk317) > cyp35a2 RNAi in wildtype (N2) > wildtype (N2). The higher EC50 values of cyp35a2 RNAi and cyp35a2 mutant (gk317) compared to that of wildtypeC. elegans strongly supported that cyp35a2 gene plays an important role in the toxicity of FT towards C. elegans. The experiments with cyp35a2 RNAi also indicated that the development disturbance and decreased AChE activity, which were observed in FT exposed wildtype C. elegans were significantly rescued in the cyp35a2 RNAi C. elegans. Overall results suggest that the cyp35a2 may be an important gene for exerting FT toxicity in C. elegans.     

Reducing ammonia emissions and volatile fatty acids in poultry litter with liquid aluminum chloride

This study was a pen trial in which the effects of adding different rates of liquid aluminum chloride (AlCl(3)) on litter pH, total volatile fatty acids (VFAs), and ammonia (NH(3)) fluxes was evaluated. Liquid AlCl(3) treatments used in this study were sprayed on the rice hull surface at rates of 100 g, 200 g, and 300 g liquid AlCl(3)/kg rice hulls; untreated rice hulls served as controls. Litter pH, total VFAs, and NH(3) fluxes were all lowered (P< 0.05) by all of the liquid AlCl(3) treatments compared with controls during certain times of the 5 week study. However, there were no significant differences among treatments on litter pH at the end of the study (from 3 to 5 weeks) or NH(3) fluxes at beginning of the study (0 to 3 weeks). Total VFAs were reduced 16 %, 29 %, and 53 % by 100 g liquid AlCl(3)/kg rice hulls, 200 g liquid AlCl(3)/kg rice hulls, and 300 g liquid AlCl(3)/kg rice hulls, respectively. Liquid AlCl(3)additions reduced NH(3) fluxes by 35 %, 57 % and 67 %, respectively, at the low, medium and high rates. In summary, these results indicate that adding liquid aluminum chloride to rice hulls would be a useful tool in reducing the negative environmental impact of poultry litter. It should be noted that the decreased VFA production and NH(3) volatilization was chiefly associated with reduction in litter pH.     

Interferometric Microwave Radiometers for High-Resolution Imaging of the Atmosphere Brightness Temperature Based on the Adaptive Capon Signal Processing Algorithm

Passive microwave remote sensing from satellites and ground stations has contributed uniquely, and substantially, to the study of atmospheric chemistry, meteorology, and environmental monitoring. As user requirements are raised, in terms of the accuracy and the spatial resolution, a mechanically scanning radiometer, with a real aperture, becomes impractical due to the requirement for a very large antenna size. However, an aperture synthesis interferometric radiometer presents a valuable alternative. The work presented in this paper was devoted to high spatial resolution imaging, using the 37 GHz band interferometric radiometer, developed by ourselves. The spatially adaptive Capon beamforming method was exploited for the imaging, which outperformed the conventional Fourier Transform method. We concluded that the high spatial resolution imaging of the brightness temperature of the atmosphere could be accomplished with an interferometric radiometer equipped with the developed Capon beamforming imaging algorithm.     

Optimal operating parameters in the composting of swine manure with wastepaper

Abstract

A series of experiments were conducted to determine the optimal conditions for composting of swine manure and wastepaper. The aeration rate and mixing ratio were the variables investigated. In the first study (Study‐1), four experiments each with the same mixing ratio but a different aeration rate were carried out. In the second study (Study‐2), different mixing ratios were investigated, each however with the same aeration rate which was found to be optimal from Study‐1. Composting efficiencies were evaluated on the temperature profile and the reduction of C/N ratio. From the aeration rates of 200, 500, 1000, and 1500 mL/min.kg_vs that were evaluated, the aeration rate of 500 mL/min.kg_vs and higher showed good results. In Study‐2, where the initial C/N ratios were 20, 25, 30, and 35 respectively, the C/N ratio of 30 was found to be optimal. In conclusion, the composting of swine manure with the amendment of wastepaper was best carried out at the aeration of >500 mL/min.kg_vs and C/N ratio of 30.     

Effect of Solids Concentration on Bacterial Leaching of Heavy Metals from Sewage Sludge

Abstract

Microbial metal leaching from sewage sludge (2-9% w/v) was carried out with the iron-oxidizing bacterium Thiobacillus ferrooxidans. Measurements of pH, oxidation-reduction potential, and concentration of Fe²⁺ indicated that T. ferrooxidans was effective in removing metals from an incubation bath containing less than 5% sludge solids concentration. Specifically, Cu leaching was completely suppressed at a high solids concentration of 9% (w/v). Results indicated that the deactivation of T. ferrooxidans at a high sludge content was mainly due to the presence of inhibiting materials such as organic matter. A mixed culture of sulfur-oxidizing bacteria was obtained by enrichment from anaerobically digested sewage sludge to enhance the efficiency of the microbial leaching process. These bacteria were much more effective in metal leaching than was iron-oxidizing T. ferrooxidans. At 9% (w/v) solids concentration, the leaching efficiencies of Zn and Cu were 78% (2.66 g/kg dry sludge) and 59% (1.36 g/kg dry sludge), respectively. Therefore, when removing heavy metals from the anaerobically digested sewage sludge, the indigenous sulfur-oxidizing bacteria isolated in the current study were more efficient than T. ferrooxidans, especially at high sludge solids concentrations.     

Receptor modeling for analyzing PCDD/F and dioxin-like PCB sources in Hong Kong

A total of 96 ambient air samples were collected from January 2004 to December 2004 for the investigation of dioxins (polychlorinated dibenzo-para-dioxins and polychlorinated dibenzofurans [PCDD/Fs]) and dioxin-like profile for polychlorinated biphenyls (PCBs) in the atmosphere of Hong Kong. Two-day back-trajectories were obtained using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model from National Oceanic and Atmospheric Administration (NOAA) Air Resources Laboratory. Receptor models – potential source contribution function (PSCF) and concentration-weighted trajectory (CWT) – were built based on the measured PCDD/Fs and dioxin-like PCBs total toxic equivalent (TEQ) concentrations. Both models were modified in this study so as to integrate the information obtained from three sampling sites in Hong Kong. The PSCF modeling resolved two main PCDD/F and dioxin-like PCB polluting paths from Mainland China. In line with previous studies, the northerly path around the Pearl River Delta might be one of the pollution sources of Hong Kong air. On the other hand, the receptor models also indicated another potential northeasterly source from Yangtze River Delta, which was seldom mentioned as the source region of Hong Kong air. Results from the CWT modeling suggested that the most toxic air mass affecting Hong Kong is probably attributable to the northeast path rather than the north path.     

Concentrations of As, Be, Cr, Hg, Mn, and Ni in ambient air at four urban locations in Japan

The metal concentrations of As, Be, Cr, Hg, Mn, and Ni in ambient air were measured at four sites in Japan from October 1997 to March 2006. The mean metal concentration data measured from the four sites (K1, K2, M, and Y) are found on the order of Mn > Cr–Ni > As > Hg > Be. The concentrations of Mn with the highest mean value were fairly variable across four sites such as 45.9 ± 42.8 (K1), 25.6 ± 19.4 (K2), 22.5 ± 19.7 (M), and 25.4 ± 19.8 ng m^???3 (Y). In contrast, the concentrations of Be with the lowest mean value were less variable across four sites with means of 0.03 to 0.04 ng m^???3. Inspection of the seasonal patterns indicates the peak occurrence of most metals during spring, although relative dominance during winter is seen at the most polluted area (K1). Evaluation of long-term patterns indicates that the noticeably high values of metals in the early stage of study reduced gradually across the years, although the metal concentration levels in most areas were affected significantly by anthropogenic activities. However, efforts to control pollution levels seemed to gradually contribute to a decrease in metal concentration levels of all study sites through the years.