Trimethylamine abatement in algal-bacterial photobioreactors

Trimethylamine (TMA) is an odorous volatile organic compound emitted by industries. Algal-based biotechnologies have been proven as a feasible alternative for wastewater treatment, although their application to abate polluted air emissions is still scarce. This work comparatively assessed the removal of TMA in a conventional bacterial bubble column bioreactor (BC) and a novel algal-bacterial bubble column photobioreactor (PBC). The PBC exhibited a superior TMA abatement performance compared to the conventional BC. In this sense, the BC reached a removal efficiency (RE) and an elimination capacity (EC) of 78% and 12.1 g TMA m^?3 h^?1, respectively, while the PBC achieved a RE of 97% and a EC of 16.0 g TMA m^?3·h^?1 at an empty bed residence time (EBRT) of 2 min and a TMA concentration ~500 mg m^?3. The outstanding performance of the PBC allowed to reduce the operating EBRT to 1.5 and 1 min while maintaining high REs of 98 and 94% and ECs of 21.2 and 28.1 g m^?3·h^?1, respectively. Moreover, the PBC improved the quality of the gas and liquid effluents discharged, showing a net CO₂ consumption and decreasing by ~ 30% the total nitrogen concentration in the liquid effluent via biomass assimilation. A high specialization of the bacterial community was observed in the PBC, Mumia and Aquamicrobium sp. being the most abundant genus within the main phyla identified.

GraphicalAbstract

     

Herbicides and nitrogen in precipitation: progression from west to east and contribution to the Marne river (France)

Herbicides and nitrogen fallout were studied in France at six sites from west to east. Atrazine, a herbicide widely used in France and forbidden in some European countries was found. Its fallout was quantified to 400 kg on the river Marne catchment (13 500 km2), an agricultural region located east of Paris. The average fallout contribution to the Marne river contamination was estimated at 20 ng/l from March to August. Independently of the wind direction, only a small part of this atmospheric contamination can reach adjacent countries.     

Biodegradability of wheat gluten based bioplastics

A large variety of wheat gluten based bioplastics, which were plasticized with glycerol, were subjected to biodegradation. The materials covered the total range available for the biochemical control parameter Fi, which expresses the percentage of aggregated proteins. This quantity can be related to the density of covalent crosslinks in the wheat gluten network, which are induced by technological treatments. The biodegradability tests were performed in liquid medium (modified Sturm test) and in farmland soil. All gluten materials were fully degraded after 36 days in aerobic fermentation and within 50 days in farmland soil. No significant differences were observed between the samples. The mineralization half-life time of 3.8 days in the modified Sturm test situated gluten materials among fast degrading polymers. The tests of microbial inhibition experiments revealed no toxic effects of the modified gluten or of its metabolites. Thus, the protein bulk of wheat gluten materials is non-toxic and fully biodegradable, whatever the technological process applied.     

Biological remediation of explosives and related nitroaromatic compounds

Nitroaromatics form an important group of recalcitrant xenobiotics. Only few aromatic compounds, bearing one nitro group as a substituent of the aromatic ring, are produced as secondary metabolites by microorganisms. The majority of nitroaromatic compounds in the biosphere are industrial chemicals such as explosives, dyes, polyurethane foams, herbicides, insecticides and solvents. These compounds are generally recalcitrant to biological treatment and remain in the biosphere, where they constitute a source of pollution due to both toxic and mutagenic effects on humans, fish, algae and microorganisms. However, relatively few microorganisms have been described as being able to use nitroaromatic compounds as nitrogen and/or carbon and energy source. The best-known nitroaromatic compound is the explosive TNT (2,4,6-trinitrotoluene). This article reviews the bioremediation strategies for TNT-contaminated soil and water. It comes to the following conclusion: The optimal remediation strategy for nitroaromatic compounds depends on many site-specific factors. Composting and the use of reactor systems lend themselves to treating soils contaminated with high levels of explosives (e.g. at former ammunition production facilities, where areas with a high contamination level are common). Compared to composting systems, bioreactors have the major advantage of a short treatment time, but the disadvantage of being more labour intensive and more expensive. Studies indicate that biological treatment systems, which are based on the activity of the fungus Phanerochaete chrysosporium or on Pseudomonas sp. ST53, might be used as effective methods for the remediation of highly contaminated soil and water. Phytoremediation, although not widely used now, has the potential to become an important strategy for the remediation of soil and water contaminated with explosives. It is best suited where contaminant levels are low (e.g. at military sites where pollution is rather diffuse) and where larger contaminated surfaces or volumes have to be treated. In addition, phytoremediation can be used as a polishing method after other remediation treatments, such as composting or bioslurry, have taken place. This in-situ treatment method has the advantage of lower treatment costs, but has the disadvantage of a considerable longer treatment time. In order to improve the cost-efficiency, phytoremediation of nitroaromatics (and other organic xenobiotics) could be combined with bio-energy production. This requires, however, detailed knowledge on the fate of the contaminants in the plants as well as the development of efficient treatment methods for the contaminated biomass that minimise the spreading of the contaminants into the environment during post harvest treatment.     

Polybrominated diphenyl ethers and traditional organochlorine pollutants in fulmars (Fulmarus glacialis) from the Faroe Islands

The observed high-level burdens of organohalogens among the residents of the Faroe Islands, needs to be explained. Long-finned pilot whale (Globicephala melas) blubber and meat are known sources of environmental exposure. The present study focus on the organohalogen contamination of the fulmar (Fulmarus glacialis). The compounds quantified in fulmar muscle, fat, and egg are PCBs, DDTs, hexachlorobenzene (HCB), and polybrominated diphenyl ethers (PBDEs). The dominating pollutants are the 4,4'-DDT metabolite 4,4'-DDE and the two PCB congeners, CB-153 and CB-180, which are present in geometric mean concentrations of 7100, 4700 and 2500 ng/g lipid weight (l.w.), respectively, in adult fulmar muscle. 4,4'-DDT and HCB concentrations are approximately 250 ng/gl.w., each. Concentrations in the eggs are about 50% of the fulmar muscle levels, due to differences in lipid amounts, 4% in muscle and 10% in the eggs, the exposure contribution on a fresh weight basis is almost the same. As a result, both the egg and the adult fulmar muscle may lead to a significant exposure risk, if consumed by humans. BDE-153, the most abundant PBDE congener in fulmar muscle, with a geometric mean concentration of 6.5 ng/gl.w., is much lower than the individual PCB congeners and 4,4'-DDE concentrations. In the adult fulmar muscle, the relative PBDE congener pattern is different from that previously observed in biota, with BDE-153 and BDE-154 as the dominating congeners, rather than BDE-47. In contrast, BDE-47 is the most abundant congener in juvenile muscle and subcutaneous fat. The summation operatorPBDE concentrations are almost the same in egg, muscle (adult and juvenile) and subcutaneous fat (juvenile). For the polybrominated biphenyl (BB-153) the concentrations are considerably higher in the adult bird and egg than in the juvenile bird; this is also seen for the PCB and 4,4'-DDE concentrations. PCB concentrations found in fulmar egg and muscle are in the same range as seen in the pilot whale, i.e. 590-5700 ng/gl.w. for CB-153. Hence humans are also exposed to PCBs at a reasonable degree via intake of fulmar and/or fulmar egg and not only via pilot whale blubber.     

Photochemical degradation and mineralization of 4-chlorophenol

INTENTION, GOAL, SCOPE, BACKGROUND: Since the intermediate products of some compounds can be more toxic and/or refractory than the original compund itself, the development of innovative oxidation technologies which are capable of transforming such compounds into harmless end products, is gaining more importance every day. Advanced oxidation processes are one of these technologies. However, it is necessary to optimize the reaction conditions for these technologies in order to be cost-effective. OBJECTIVE: The main objectives of this study were to see if complete mineralization of 4-chlorophenol with AOPs was possible using low pressure mercury vapour lamps, to make a comparison of different AOPs, to observe the effect of the existence of other ions on degradation efficiency and to optimize reaction conditions. METHODS: In this study, photochemical advanced oxidation processes (AOPs) utilizing the combinations of UV, UV/H2O2 and UV/H2O2/Fe2+ (photo-Fenton process) were investigated in labscale experiments for the degradation and mineralization of 4-chlorophenol. Evaluations were based on the reduction of 4-chlorophenol and total organic carbon. The major parameters investigated were the initial 4-chlorophenol concentration, pH, hydrogen peroxide and iron doses and the effect of the presence of radical scavengers. RESULTS AND DISCUSSION: It was observed that the 4-chlorophenol degradation efficiency decreased with increasing concentration and was independent of the initial solution pH in the UV process. 4-chlorophenol oxidation efficiency for an initial concentration of 100 mgl(-1) was around 89% after 300 min of irradiation in the UV process and no mineralization was achieved. The efficiency increased to > 99% with the UV/H2O2 process in 60 min of irradiation, although mineralization efficiency was still around 75% after 300 min of reaction time. Although the H2O2/4-CP molar ratio was kept constant, increasing initial 4-chlorophenol concentration decreased the treatment efficiency. It was observed that basic pHs were favourable in the UV/H2O2 process. The results showed that the photo-Fenton process was the most effective treatment process under acidic conditions. Complete disappearance of 100 mgl(-1) of 4-chlorophenol was achieved in 2.5 min and almost complete mineralization (96%) was also possible after only 45 min of irradiation. The efficiency was negatively affected from H2O2 in the UV/H2O2 process and Fe2+ in the photo-Fenton process over a certain concentration. The highest negative effect was observed with solutions containing PO4 triple ions. Required reaction times for complete disappearance of 100 mgl(-1) 4-chlorophenol increased from 2.5 min for an ion-free solution to 30 min for solutions containing 100 mgl(-1) PO4 triple ion and from 45 min to more than 240 min for complete mineralization. The photodegradation of 4-chlorophenol was found to follow the first-order law. CONCLUSION: The results of this study showed that UV irradiation alone can degrade 4-CP, although at very slow rates, but cannot mineralize the compound. The addition of hydrogen peroxide to the system, the so-called UV/H2O2 process, significantly enhances the 4-CP degradation rate, but still requires relatively long reaction periods for complete mineralization. The photo-Fenton process, the combination of homogeneous systems of UV/H2O2/Fe2+ compounds, produces the highest photochemical elimination rate of 4-CP and complete mineralization is possible to achieve in quite shorter reaction periods when compared with the UV/H2O2 process. RECOMMENDATIONS AND OUTLOOK: It is more cost effective to use these processes for only purposes such as toxicity reduction, enhancement of biodegradability, decolorization and micropollutant removal. However the most important point is the optimization of the reaction conditions for the process of concern. In such a case, AOPs can be used in combination with a biological treatment systems as a pre- or post treatment unit providing the cheapest treatment option. The AOP applied, for instance, can be used for toxicity reduction and the biological unit for chemical oxygen demand (COD) removal.     

New potential mammalian lignan metabolites of environmental phytoestrogens

Seven new dibenzylbutyrolactone and six new dibenzylbutanediol lignans were prepared to assist in the identification of a number of potential mammalian metabolites of the endocrine disrupting plant lignans syringaresinol and medioresinol, present in food.     

A critical analysis of earthquakes and urban planning in Turkey

The land use plans and policies of developed countries that live with the threat of earthquakes are gaining importance in reducing or eliminating the long‐term threat to people and property. In developing countries, however, these plans and policies seem to increase the level of vulnerability. This paper examines the effects of the earthquakes that have occurred in Turkey since 1992, with a particular focus on urbanisation and planning policies. It is based on extensive surveys carried out on location immediately after the earthquakes in Erzincan and Kocaeli‐Gölcük in 1992 and 1999, respectively. The analysis takes into account several factors, including the height of buildings, geological conditions and the construction period. The authors conclude that land use planning can serve as a very useful instrument for mitigating the extent of disaster damage if it is part of an appropriate planning system. In the case of Turkey, the planning system needs to be reorganised for this purpose.     

A cluster-based decision support system for estimating earthquake damage and casualties

This paper describes a Decision Support System for Disaster Management (DSS-DM) to aid operational and strategic planning and policy-making for disaster mitigation and preparedness in a less-developed infrastructural context. Such contexts require a more flexible and robust system for fast prediction of damage and losses. The proposed system is specifically designed for earthquake scenarios, estimating the extent of human losses and injuries, as well as the need for temporary shelters. The DSS-DM uses a scenario approach to calculate the aforementioned parameters at the district and sub-district level at different earthquake intensities. The following system modules have been created: clusters (buildings) with respect to use; buildings with respect to construction typology; and estimations of damage to clusters, human losses and injuries, and the need for shelters. The paper not only examines the components of the DSS-DM, but also looks at its application in Besiktas municipality in the city of Istanbul, Turkey.