Efficacy of various amendments for amelioration of fly-ash toxicity: growth performance and metal composition of Cassia siamea Lamk

Plants of Cassia siamea Lamk were grown in garden soil (control), fly-ash (100%) and fly-ash amended by various ameliorants (cowdung manure, press-mud, garden soil; 1:1, w/w). The plants survived in fly-ash (100%) though their growth was less in comparison to the treatments. Fly-ash+press-mud (1:1, w/w) proved to be the best combination as growth (total biomass, leaf number, photosynthetic area, total chlorophyll and protein) was significantly high in this treatment followed by cowdung manure and garden soil. Leaves and roots accumulated significant amount of Cu, Zn, Ni and and Fe. However, the concentration of all the metals was more in roots than leaves except Ni. Although, fly-ash contains high amount of metals but the metal uptake was more in the plants grown in fly-ash+press-mud mixture. Inspite of high metal availability in fly-ash and press-mud mixture, plant growth was good. This might be attributed to the some metal detoxification mechanism active in this treatment. The present study concluded that C. siamea seems to be a suitable plant for developing a vegetation cover on fly-ash dumps.     

Baseline study of methane emission from open digesting tanks of palm oil mill effluent treatment

Anthropogenic release of greenhouse gases, especially CO₂ and CH₄ has been recognized as one of the main causes of global warming. Several measures under the Kyoto Protocol 1997 have been drawn up to reduce the greenhouse gases emission. One of the measures is Clean Development Mechanisms (CDM) that was created to enable developed countries to cooperate with developing countries in emission reduction activities. In Malaysia, palm oil industry particularly from palm oil mill effluent (POME) anaerobic treatment has been identified as an important source of CH₄. However, there is no study to quantify the actual CH₄ emission from the commercial scale wastewater treatment facility. Hence, this paper shall address the CH₄ emission from the open digesting tanks in Felda Serting Hilir Palm Oil Mill. CH₄ emission pattern was recorded for 52 weeks from 3600 m³ open digesting tanks. The findings indicated that the CH₄ content was between 13.5% and 49.0% which was lower than the value of 65% reported earlier. The biogas flow rate ranged between 0.8 l min⁻¹ m⁻² and 9.8 l min⁻¹ m⁻². Total CH₄ emission per open digesting tank was 518.9 kg day⁻¹. Relationships between CH₄ emission and total carbon removal and POME discharged were also discussed. Fluctuation of biogas production was observed throughout the studies as a result of seasonal oil palm cropping, mill activities, variation of POME quality and quantity discharged from the mill. Thus only through long-term field measurement CH₄ emission can be accurately estimated.     

Effects of TiO2 nanoparticles on the aquatic plant Spirodela polyrrhiza: Evaluation of growth parameters, pigment contents and antioxidant enzyme activities

Plants are essential components of all ecosystems and play a critical role in environmental fate of nanoparticles. However, the toxicological impacts of nanoparticles on plants are not well documented. Titanium dioxide nanoparticles (TiO₂-NPs) are produced worldwide in large quantities for a wide range of purposes. In the present study, the uptake of TiO₂-NPs by the aquatic plant Spirodela polyrrhiza and the consequent effects on the plant were evaluated. Initially, structural and morphological characteristics of the used TiO₂-NPs were determined using XRD, SEM, TEM and BET techniques. As a result, an anatase structure with the average crystalline size of 8nm was confirmed for the synthesized TiO₂-NPs. Subsequently, entrance of TiO₂-NP_S to plant roots was verified by fluorescence microscopic images. Activity of a number of antioxidant enzymes, as well as, changes in growth parameters and photosynthetic pigment contents as physiological indices were assessed to investigate the effects of TiO₂-NPs on S. polyrrhiza. The increasing concentration of TiO₂-NPs led to the significant decrease in all of the growth parameters and changes in antioxidant enzyme activities. The activity of superoxide dismutase enhanced significantly by the increasing concentration of TiO₂-NPs. Enhancement of superoxide dismutase activity could be explained as promoting antioxidant system to scavenging the reactive oxygen species. In contrast, the activity of peroxidase was notably decreased in the treated plants. Reduced peroxidase activity could be attributed to either direct effect of these particles on the molecular structure of the enzyme or plant defense system damage due to reactive oxygen species.     

The fate of prazosin and levonorgestrel after electrochemical degradation process: Monitoring by-products using LC-TOF/MS

Prazosin (PRZ) and levonorgestrel (LNG) are widely used as an anti-disease drugs due to their biological activity in the human body. The frequent detection of these compounds in water samples requires alternative technologies for the removal of both compounds. After electrochemical degradation of PRZ and LNG, the parent compounds could be completely removed after treatment, but the identification and characterization of by-products are necessary as well. In this study, the effects of NaCl concentration and applied voltage were investigated during the electrochemical degradation process. The results revealed that the increase of NaCl concentration and applied voltage could promote the generation of hypochlorite OCl? and then enhance the degradation of PRZ and LNG. After initial study, 6 V and 0.2 g NaCl were selected for further experiments (96% and 99% removal of PRZ and LNG after 40 min, respectively). Energy consumption was also evaluated and calculated for PRZ and LNG at 3, 6 and 8 V. Solid phase extraction (SPE) method plays an important role in enhancing the detection limit of by-products. Furthermore, characterization and identification of chlorinated and non-chlorinated by-products were conducted using an accurate liquid chromatography-time of flight/mass spectrometry LC-TOF/MS instrument. The monitoring of products during the electrochemical degradation process was performed at 6 V and 0.2 g NaCl in a 50 mL solution. The results indicated that two chlorinated products were formed during the electrochemical process. The toxicity of by-products toward E. coli bacteria was investigated at 37°C and 20 hr incubation time.     

Pedestrian road crossing behavior (PEROB): Development and psychometric evaluation

Objective: The aim of this study was to develop a theory-based questionnaire to measure road crossing attitudes and potentially risky pedestrian behavior.

Methods: A cross-sectional validation study was carried out on a total sample of 380 young adults aged 18 to 25 years who live in Tehran, Iran. Data were collected from January 27 to May 20, 2015, using a self-administered structured pool of 76 items that was developed from research on the theory of planned behavior. A panel of subject-matter experts evaluated the items for content validity index and content validity ratio, and the questionnaire was pretested. Exploratory factor analysis (EFA) was performed to test construct validity. The Cronbach's alpha coefficient and intraclass correlation coefficient (ICC) analyses were done to assess internal consistency and stability of the scale.

Results: From the initial 76 items, 38 items were found to be appropriate for assessing the pedestrian road crossing behavior (PEROB) of young adults in Tehran. A 9-factor solution revealed an exploratory factor analysis that jointly accounted for 63.8% of the variance observed. Additional analyses also indicated acceptable results for the internal consistency with Cronbach's alpha value ranging from 0.67 to 0.88 and ICC values ranging from 0.64 to 0.96.

Conclusions: This psychometric evaluation of a self-administered instrument resulted in a reliable and valid instrument to assess young adult pedestrians' self-reported road crossing attitudes and behaviors in Tehran. Further development of the instrument is needed to assess its applicability to other road users, particularly older pedestrians.     

Spatial assessment of groundwater quality in Guna Tana landscape

This study focuses on investigating the quality of groundwater for irrigation and drinking water purposes. Spatial distribution of physicochemical and microbiological parameters was assessed from samples collected from springs, hand‐dug wells, and boreholes found the Guna Tana landscape. A total of 70 samples were considered for physical, chemical, and bacteriological water quality determination. The results revealed that most of the groundwater quality index (WQI) values lie between good and excellent. The maximum, minimum, mean, and standard deviation of each water quality parameter were prepared for evaluating groundwater quality. According to the WQI values, more than 83% of the water samples were classified as excellent water for drinking. More than 92% of the water samples showed low sodium hazards for irrigation and about 48% and 46% of the water samples were classified as within the excellent and good water classes for irrigation based on their electrical conductance levels. Therefore, the groundwater that is found in the Guna Tana landscape could be used for drinking and irrigation purposes without any advanced treatment.     

Does Wetland Location Matter When Managing Wetlands for Watershed‐Scale Flood and Drought Resilience?

Wetland protection and restoration strategies that are designed to promote hydrologic resilience do not incorporate the location of wetlands relative to the main stream network. This is primarily attributed to the lack of knowledge on the effects of wetland location on wetland hydrologic function (e.g., flood and drought mitigation). Here, we combined a watershed‐scale, surface–subsurface, fully distributed, physically based hydrologic model with historical, existing, and lost (drained) wetland maps in the Nose Creek watershed in the Prairie Pothole Region of North America to (1) estimate the hydrologic functions of lost wetlands and (2) estimate the hydrologic functions of wetlands located at different distances from the main stream network. Modeling results showed wetland loss altered streamflow, decreasing baseflow and increasing stream peakflow during the period of the precipitation events that led to major flooding in the watershed and downstream cities. In addition, we found that wetlands closer to the main stream network played a disproportionately important role in attenuating peakflow, while wetland location was not important for regulating baseflow. The findings of this study provide information for watershed managers that can help to prioritize wetland restoration efforts for flood or drought risk mitigation.     

Heavy metal mobility and potential availability in animal manure: using a sequential extraction procedure

In this study, dairy cow manure, goat manure, and chicken manure were collected from three farms and analyzed to find out the concentration of Cd, Co, Cr, Cu, Mn, Ni, Pb, and Zn. The concentration and potential of mobility and availability of heavy metals were studied in the animal manure samples. BCR Sequential extraction procedure was used to determine the binding forms of the metals. In this study, pseudo total concentrations of Mn and Zn were found out to be predominant in all the types of animal manure samples. According to the results, it was traced that Cr, Cu, and Ni were observed to be at the second highest level while Cd, Co, and Pb were seen at the lowest level in all the manure samples. When extractable amounts of heavy metals are taken into consideration, it is seen that the amount of the mobile fractions of heavy metals except for Cr and Ni are higher in comparison with that of immobile fraction in all the animal manure samples. It was also viewed that Mn, Cd, and Zn are more available in dairy cow manure and chicken manure whereas Cd, Co, and Mn are more available in goat manure.     

Traffic accident reconstruction and an approach for prediction of fault rates using artificial neural networks: A case study in Turkey

Objective: Currently, in Turkey, fault rates in traffic accidents are determined according to the initiative of accident experts (no speed analyses of vehicles just considering accident type) and there are no specific quantitative instructions on fault rates related to procession of accidents which just represents the type of collision (side impact, head to head, rear end, etc.) in No. 2918 Turkish Highway Traffic Act (THTA 1983). The aim of this study is to introduce a scientific and systematic approach for determination of fault rates in most frequent property damage–only (PDO) traffic accidents in Turkey.

Methods: In this study, data (police reports, skid marks, deformation, crush depth, etc.) collected from the most frequent and controversial accident types (4 sample vehicle–vehicle scenarios) that consist of PDO were inserted into a reconstruction software called vCrash. Sample real-world scenarios were simulated on the software to generate different vehicle deformations that also correspond to energy-equivalent speed data just before the crash. These values were used to train a multilayer feedforward artificial neural network (MFANN), function fitting neural network (FITNET, a specialized version of MFANN), and generalized regression neural network (GRNN) models within 10-fold cross-validation to predict fault rates without using software. The performance of the artificial neural network (ANN) prediction models was evaluated using mean square error (MSE) and multiple correlation coefficient (R).

Results: It was shown that the MFANN model performed better for predicting fault rates (i.e., lower MSE and higher R) than FITNET and GRNN models for accident scenarios 1, 2, and 3, whereas FITNET performed the best for scenario 4. The FITNET model showed the second best results for prediction for the first 3 scenarios. Because there is no training phase in GRNN, the GRNN model produced results much faster than MFANN and FITNET models. However, the GRNN model had the worst prediction results. The R values for prediction of fault rates were close to 1 for all folds and scenarios.

Conclusions: This study focuses on exhibiting new aspects and scientific approaches for determining fault rates of involvement in most frequent PDO accidents occurring in Turkey by discussing some deficiencies in THTA and without regard to initiative and/or experience of experts. This study yields judicious decisions to be made especially on forensic investigations and events involving insurance companies. Referring to this approach, injury/fatal and/or pedestrian-related accidents may be analyzed as future work by developing new scientific models.     

长期施肥对棕壤有机碳储量及固碳速率的影响

利用棕壤肥料长期定位试验,研究了不同施肥条件下棕壤有机碳在0~60 cm土层的含量和储量特征以及土壤固碳速率.试验共设6个处理,即氮磷肥有机肥配施(M_2NP)、氮肥有机肥配施(M_2N)、单施有机肥(M_2)、单施氮肥(N)、氮磷肥配施(NP)和不施肥处理(CK).结果表明:经过31年长期不同施肥,各处理土壤有机碳(SOC)含量和储量的剖面分布均呈现随土层深度增加而显著降低的规律.本试验条件下M_2NP、M_2N、M_2、NP、N、CK处理的耕层有机碳富集系数分别为0.465、0.455、0.407、0.48_2、0.393、0.471,表明耕层土壤对有机碳的保持强度最强.在0~60 cm土层土壤有机碳储量表现为M_2NP、M_2NM_2、NPNCK,有机肥和化肥配施能够显著提高土壤有机碳含量和储量.与试验前相比,CK处理各土层土壤有机碳含量和储量均显著降低.各处理碳库管理指数(CPMI)表现为M_2NPM_2NM_2NNPCK.分析不同施肥处理土壤固碳速率可知,与试验前相比,CK处理表现为碳的净释放,固碳速率达-401.4 kg·hm~(-_2)·a~(-1);固碳速率最高的为M_2NP,M_2N,分别达到489kg·hm~(-_2)·a~(-1)、440._2 kg·hm~(-_2)·a~(-1).综合结果表明,化肥、有机肥配施所产生交互效应更有利于棕壤有机碳储量的增加及固碳速率的提高.