Contamination of lead (Pb) in the coastal sediments of north and south of Iran: a review study

Coastal areas of Iran are heavily affected by urbanisation, industrialisation, and maritime activities. One consequence of this environmental pressure is the contaminants accumulation, as heavy metals, into the marine ecosystem. In this review, the coastal areas in the north and south of the country were assessed for lead (Pb) contamination of, one of the most toxic metals found in the environment. All studies conducted during 2006–2016 with at least 10 specimens that reported the mean and standard deviation of Pb were considered in this review. Heterogeneity between studies was assessed using the Q and I² statistics. The Pb mean concentration overall studies was estimated to be 21.88?µg/g (95% CIs: 16.25–27.50). Random effect model showed no statistical difference in mean Pb concentration levels between south and north coasts. However, the variability in Pb mean concentrations within southern coasts was considerable and statistically significant. Moreover, the Pb concentrations in the northern coasts of Persian Gulf and Oman Sea, in south of Iran, decreased in the following order Hormozgan > Khuzestan > Sistan-VA-Balluchestan > Bushehr while in the southern coasts of Caspian Sea, in north of Iran, decreased in the order Guilan > Mazandaran > Golestan.     

Entomotoxic effect of silicon dioxide nanoparticles on Plutella xylostella (L.) (Lepidoptera: Plutellidae) under laboratory conditions

The use of higher dosage and repeated applications of conventional pesticides have led to the rapid development of insect resistance to pesticide and adverse effects on human health and environment. Accordingly, researchers are prompted to identify an alternative entomotoxic agent for crop protection. Nanocides are being considered as alternatives to conventional insecticides because they are expected to lessen the application rate and reduce the chances of resistance development in pests. In this study, we evaluated the entomotoxic effects of nanosilica on larvae of Plutella xylostella, in a laboratory by using dust spray, larva dipping, leaf dipping, and solution spray methods. Dust treatment showed a more highly significant effect than the other three treatments. The mortality percentage increased up to 58% and 85% at 24 and 72 h after treatment, respectively, when nanosilica was applied at a rate of 1 mg cm^?2. In all four bioassays, mortality rate increased with both increased time after nanosilica exposure and increased concentration. Light microscopy and scanning electron microscopy images showed that larval death was due to desiccation, body wall abrasion, and spiracle blockage. These results suggested that nanosilica can be an alternative to conventional pesticides if dust formulation would be properly used.     

Free radical-assisted electrocoagulation processes for wastewater treatment

The combination of electrocoagulation with another process is a promising approach to enhance the removal efficiency of water pollutants. For instance, free radical-assisted electrocoagulation is a new combination showing higher performance. There are different combinations depending on the free radical source. This article reviews free radical-assisted electrocoagulation processes. We discuss electrocoagulation mechanisms; ozone-assisted electrocoagulation processes; advanced oxidation-assisted electrocoagulation processes; and ultrasound-assisted electrocoagulation. We present kinetic models used in free radical-assisted electrocoagulation, scale-up of free radical-assisted electrocoagulation and cost estimation. The major points are: most of the available studies have been done at laboratory scale with synthetic wastewater, and lack holistic and systematic approaches to consider the process complexity. The performance of the combined process is improved, and the removal efficiency is increased especially with ozone-assisted electrocoagulation, which gives a removal efficiency of more than 95%. The use of ultrasound energy with electrocoagulation is advantageous in reducing the problem of electrode passivation.     

Improved power density and Cr/Pb removal using ozone in a microbial desalination cell

Environmental Chemistry Letters - Microbial desalination cells are promising bio-electrochemical technologies for water desalination, treating wastewater and bioelectricity production. In this...     

Changes in chemical forms of lead in temperate and semiarid soils in sterile and unsterile conditions

Sequential extraction has been used as a suitable method for fractionation of chemical forms of trace elements and study of their plant availability. Surface soils were sampled from Guilan and Hamadan provinces in north and northwest of Iran with temperate and semiarid climates. The chemical forms of Pb in the Pb(NO₃)₂-treated (400 μg Pb g⁻¹) soils have been studied in solid state incubation (FC) at 27°C in sterile and unsterile conditions. After 20 min and 3600 h a sequential extraction scheme was also used to fractionate Pb of incubated samples into soluble-exchangeable (Sol-Exch), carbonates associated (ACar), organic matter associated (AOM), Mn oxide associated (AMnOx), Fe oxide associated (AFeOx), and residual (Res) forms. Temperate soil samples had higher clay content, cation exchange capacity (CEC), dichromate oxidable organic carbon (OC), total Kjeldahl-nitrogen (TN), biological activity, amorphous and crystalline Fe and Al, but semiarid soil samples had higher sand content, pH, equivalent calcium carbonate (ECC), available P and K. Soil lead fractionation revealed that in both groups of soils Pb largely changed to exchangeable, carbonates associated and organic associated forms after 20 min. The chemical forms of Pb differed widely among soils after 3600-h incubation. The conversion rate of Pb from more available forms to less available forms was higher in temperate soils with higher Fe–Mn oxides and OM contents compared to semiarid soils. In temperate soils after 3600-h incubation, greater content of Pb was observed in Res (68%), AOM (14%), ACar (7%), and AMnOx (5%) fractions. However, in semiarid soils greater content of Pb was observed in Res (61%), ACar (16%), Sol-Exch (8%), and AOM (8%) fractions. The sum of AMnOx and AFeOx chemical forms for Pb in semiarid soils compared to temperate soils was lower. It was only 7% against 9% in temperate soils. Soil microorganisms in unsterile soils had significant effect on AOM, AFeOx and Res fractions of Pb. They not only increased AOM and AFeOx fractions of Pb in soils but also decreased Res fraction of Pb significantly.     

Green Synthesis and Characterization of Silver Nanoparticles Using Elaeagnus angustifolia Bark Extract and Study of Its Antibacterial Effect

Journal of Polymers and the Environment - Nowadays, many chemical methods have been proposed for the synthesis of silver nanoparticles, but green synthesis has received more attention due to its...     

Applying machine learning approach in recycling

Journal of Material Cycles and Waste Management - Waste generation has been increasing drastically based on the world’s population and economic growth. This has significantly affected human...     

Properties of Biocomposite Films From PLA and Thermally Treated Wood Modified with Silver Nanoparticles Using Leaf Extracts of Oriental Sweetgum

Journal of Polymers and the Environment - The technological, thermal, and antimicrobial properties of biocomposite films produced from polylactic acid (PLA) and thermally treated wood flour with in...     

Evaluation of Different Scales for Measurement of Perceived Physical Strain During Performance of Manual Tasks

The main objective of this study was to evaluate different scales of perceived strain during the performance of various physical tasks. A total of 52 male and female participants took part in 4 experiments to achieve the study objective. The results suggest that a bipolar comfort-discomfort scale is a more appropriate instrument than a discomfort scale for assessing cumulative physical stresses at work, especially at the beginning of the shift. For assessing discomfort at the end of the work shift, a unipolar scale may also be used. On the basis of the obtained results, red, green, and yellow zones are suggested to establish priorities for work redesign efforts in ergonomic control programs.