Environmental impact assessment (EIA): an overlooked instrument for sustainable development in Pakistan

Environmental impact assessment (EIA) is a policy tool used for evaluating a project proposal from physical and socioeconomic environmental perspectives. Its aim is to reduce the impact of development on environment, hence, ensuring environmental sustainability. It is mandatory to submit an Environmental Impact Statement before starting a mega project as required by Environmental Protection Act of 1997 and Environmental Policy of Pakistan. Public consultation plays a key role in an EIA system, identifying the likely aspects and impacts of a development activity. This aspect has been ignored in effective enactment of environmental legislation in Pakistan. Sufficient legislative instruments are there to support EIA system in the country but the agencies responsible for the enforcement of environmental regulations have failed to do so. The current research gives an insight into the actual status of EIA system in Pakistan along with the feedback of EIA specialists and university teachers of the concerned departments. A new index has been devised on the basis of questionnaire response to work out the overall performance of EIA system in Pakistan or any other country. The weaknesses and deficiencies of each EIA stage have been worked out for Pakistan and elaborated with the help of the controversial Zero point Interchange Project in the capital city of Pakistan.     

Indoor exposure to respirable particulate matter and particulate-phase PAHs in rural homes in North India

In order to evaluate the exposure of the northern India rural population to polyaromatic hydrocarbon (PAH) inhalation, indoor pollution was assessed by collecting and analyzing the respirable particulate matter PM_2.5 and PM₁₀ in several homes of the village Bhithauli near Lucknow, UP. The home selection was determined by a survey. Given the nature of biomass used for cooking, homes were divided into two groups, one using all kinds of biomass and the second type using plant materials only. Indoor mean concentrations of PM_2.5 and associated PAHs during cooking ranged from 1.19 ± 0.29 to 2.38 ± 0.35 and 6.21 ± 1.54 to 12.43 ± 1.15 μg/m³, respectively. Similarly, PM₁₀ and total PAHs were in the range of 3.95 ± 1.21 to 8.81 ± 0.78 and 7.75 ± 1.42 to 15.77 ± 1.05 μg/m³, respectively. The pollutant levels during cooking were significantly higher compared to the noncooking period. The study confirmed that indoor pollution depends on the kind of biomass fuel used for cooking.     

Chlorination and water quality monitoring within a public drinking water supply in Rawalpindi Cantt (Westridge and Tench) area, Pakistan

Concern over the presence of fecal coliform in public drinking water supplies has been expressed in recent years in Pakistan since it has been regarded as pathogenic organism of prime importance in gastroenteritis. Two major drinking water distribution systems in the Cantt area of Rawalpindi district covering the Westridge and Tench areas was monitored over a 2-month period to determine the prevalence of fecal coliform and chlorine residual. The collected samples were examined for total chlorine, free chlorine residual, chloramines, total coliforms, fecal coliforms, and turbidity. The drinking water quality monitoring in the distribution network was performed by collecting samples from water source, overhead reservoir, and residential taps. In the Westridge area, total chlorine varied from the lowest value of 0.27 mg/L at Station # W-5 to the highest value of 0.42 mg/L at Station # W-2, total coliforms varied from 1.1 to 3.6 most probable number (MPN)/100 mL with presence of Escherichia coli in all samples, total dissolved solids (TDS) ranged from 199.5 to 205 mg/L, conductivity fluctuated between 399 and 411 microS/cm, and turbidity varied from 0.43 to 0.73 NTU. In the Tench area, the value of total chlorine ranged from 0.14 mg/L at Station # T-7 to 0.55 mg/L at Station # T-1. Total coliform varied from 3.6 to 5.1 MPN/100 mL and fecal coliform were detected at all the stations except at Station # T-1. TDS ranged from 201.4 to 257 mg/L, conductivity varied from 343 to 513 microS/cm, and turbidity ranged between 0.66 and 1.55 NTU. It is recommended to the respective agencies to ensure that the chlorine residual is available at consumer end.     

Effect of liming on the distribution of heavy metals in untreated industrial sewage sludge produced in Pakistan for the cultivation of <Emphasis Type="Italic">Sorghum bicolor</Emphasis> (L.)

The recycling of sewage sludge on agriculture land represents an alternative, advantageous, disposal of this waste material. The aim of the present study was to evaluate the feasibility of using industrial sewage sludge, produced in Pakistan, as a fertiliser. Agricultural soil amended with 25% (w/w) sewage sludge with or without lime treatment was used for growing a variety of sorghum (PARC-SS-1). The mobility of the heavy metals (HMs) (Cd, Cu, Cr, Ni, Pb and Zn) and metalloid (As) in the untreated industrial waste water sewage sludge (UIWS) samples were assessed by applying a modified BCR (Community Bureau of Reference) sequential extraction procedure. The single extraction procedure comprised of the application of mild extractant (CaCl₂) and water for the estimation of the proportion of easily soluble metal fractions. The precision and accuracy of BCR was evaluated by using a certified reference material of soil amended with sewage sludge BCR 483. The plant available metal contents, as extracted by the deionised water and 0.01 M CaCl₂ solution and exchangeable fraction of BCR sequential, decreased with lime application in the range of 10–44% for As, Cr, Ni, Pb and Zn, except in the cases of Cd and Cu, where their mobility was increased by 10% and 24%, respectively. Sludge amendment enhanced the dry weight yield of sorghum and the increase was more obvious after liming up to 25%. The uptake of HMs were lower in test samples (3.2–21.8%), except for Cu and Cd, which was higher (4%), while they were below the permissible limit of these metals. The present experiment demonstrates that liming was important in factors facilitating the growth of sorghum in sludge-amended soil.     

Dynamic linkage between industrialization,energy consumption,carbon emission,and agricultural products export of Pakistan: an ARDL approach

Environmental Science and Pollution Research - This study aims to contribute to the literature and examine the causal relationship between Pakistan’s agricultural products export,...     

Regional disparities in Preventive measures of COVID-19 pandemic in China. A study from international students’ prior knowledge,perception and vulnerabilities

Environmental Science and Pollution Research - The COVID-19 pandemic needs immediate solution before inflicting more devastation. So far, China has successfully controlled transmission of COVID-19...     

Challenges against CO2 abatement strategies in cement industry: A review

Cement industry is an intensive source of fuel consumption and greenhouse gases (GHGs) emissions. This industry is responsible for 5% of GHGs emissions and is among the top industrial sources of carbon dioxide (CO₂) emissions. Therefore, CO₂ emissions reduction from cement production process has been always an appealing subject for researches in universities and industry. Various efforts have been carried out to mitigate the huge mass of CO₂ emissions from the cement industry. Although, majority of these strategies are technically viable, due to various barriers, the level of CO₂ mitigation in cement industry is still not satisfactory. Among numerous researches on this topic, only a few have tried to answer why CO₂ abatement strategies are not globally practiced yet. This work aims to highlight the challenges and barriers against widespread and effective implementation of CO₂ mitigation strategies in the cement industry and to propose practical solutions to overcome such barriers.     

Elemental mercury (Hg0) removal from coal syngas using magnetic tea-biochar: Experimental and theoretical insights

Mercury is ranked 3^rd as a global pollutant because of its long persistence in the environment. Approximately 65% of its anthropogenic emission (Hg⁰) to the atmosphere is from coal-thermal power plants. Thus, the Hg⁰ emission control from coal-thermal power plants is inevitable. Therefore, multiple sorbent materials were synthesized using a one-step pyrolysis method to capture the Hg⁰ from simulated coal syngas. Results showed, the Hg⁰ removal performance of the sorbents increased by the citric acid/ultrasonic application. T5CUF_0.3 demonstrated the highest Hg⁰ capturing performance with an adsorption capacity of 106.81 µg/g within 60 min at 200 °C under complex simulated syngas mixture (20% CO, 20% H₂, 10 ppmV HCl, 6% H₂O, and 400 ppmV H₂S). The Hg⁰ removal mechanism was proposed, revealing that the chemisorption governs the Hg⁰ removal process. Besides, the active Hg⁰ removal performance is attributed to the high dispersion of valence Fe₃O₄ and lattice oxygen (α) contents over the T5CUF_0.3 surface. In addition, the temperature programmed desorption (TPD) and XPS analysis confirmed that H₂S/HCl gases generate active sites over the sorbent surface, facilitating high Hg⁰ adsorption from syngas. This work represented a facile and practical pathway for utilizing cheap and eco-friendly tea waste to control the Hg⁰ emission.