旋流冲击湿式脱硫除尘器在燃煤锅炉中的应用

本文结合旋流冲击脱硫除尘技术在淄博矿务局的应用，阐述了工作原理，工艺设计，运行结果和技术特点。     

Sea water intrusion in coastal areas of Yellow Seaand Bohai Sea

ＳｅａｗａｔｅｒｉｎｔｒｕｓｉｏｎｉｎｃｏａｓｔａｌａｒｅａｓｏｆＹｅｌｌｏｗＳｅａａｎｄＢｏｈａｉＳｅａＳｈｅｎｇＸｕｅｂｉｎ；ＳｕｎＪｉａｎｚｈｏｎｇ；ＤａｉＺｈａｏｈｕａ（ＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏ－ＥｎｖｉｒｏｎｍｅｎｔａｌＳｅ...     

培养提高建筑工程预算实践技能途径的探讨

高等职业教育的人才培养目标是为我国经济发展培养适应生产、建设、管理、服务第一线需要的应用性高素质人才，要求学生必须掌握够用的基础知识，必须具备较强的技术应用能力。本文以高职院校工程造价专业学生职业技能素质建设为起点，针对目前我国高职院校实践教学的现状，分析探讨了行之有效的强化培养高等职业院校工程造价专业实践技能素质的具体途径，旨在提高学生的实践能力和建筑工程预算实践技能。     

室内空气品质的数值模拟及评价

室内空气品质与人的感知以及个体差异紧密相连,室内空气品质不佳将对人的身心健康和工作可靠性产生巨大的不利影响,如何改善室内人居环境,创造健康、舒适的室内空气环境已经成为现代建筑科学的前沿研究课题.文章利用计算机模拟技术对学生宿舍中的空气品质进行了数值模拟,并采用PMV值对房间内的空气质量进行了评价,得出了评价结果.结果表明:该宿舍通风状况良好,人体感觉舒适,通过自然通风就能很好的调节室内空气品质.     

环境荷尔蒙物质及其监测与分析

介绍了环境荷尔蒙物质的种类，致毒机理培的分布情况，并对ｐｐｔ，ｐｐｑ量级的超微量环境污染物质主要是二恶英物质的监测分析方法进行了评述。对监测分析今后的发展，如解决监测信息代表性，多种有机成分同时分析技术，污染综合指标监测及二恶英类物质的监测和存在问题提出了见解。     

环状扩散管-分级采样器的建立和细粒子酸性的测定

建立了国内第一台扩散管－分级采样器，用来研究大气气胶溶胶的组成和细粒子的酸性，实验证明该采样系统能够有效地避免大气中的碱性物质对颗粒物采样的干扰。在北京，湖南等地进行了现场实验，测定了气溶胶的酸性。     

物化—生化组合工艺在鱼油工业废水处理中的应用

针对鱼油工业废水排放特点及处理技术难点，结合实例，采用混凝、破乳进行物化预处理；采用A／O生化处理技术，提出合适的工艺流程。     

Hydrogen storage and distribution systems

Hydrogen storage and transportation or distribution is closely linked together. Hydrogen can be distributed continuously in pipelines or batch wise by ships, trucks, railway or airplanes. All batch transportation requires a storage system but also pipelines can be used as pressure storage system. Hydrogen exhibits the highest heating value per weight of all chemical fuels. Furthermore, hydrogen is regenerative and environment friendly. There are two reasons why hydrogen is not the major fuel of toady’s energy consumption: First of all, hydrogen is just an energy carrier. And, although it is the most abundant element in the universe, it has to be produced, since on earth it only occurs in the form of water. This implies that we have to pay for this energy, which results in a difficult economic task, because since the industrialization we are used to consuming energy for free. The second difficulty with hydrogen as an energy carrier is the low critical temperature of 33 K, i.e. hydrogen is a gas at room temperature. For mobile and in many cases also for stationary applications the volumetric and gravimetric density of hydrogen in a storage system is crucial. Hydrogen can be stored by six different methods and phenomena: high pressure gas cylinders (up to 800 bar), liquid hydrogen in cryogenic tanks (at 21 K), adsorbed hydrogen on materials with a large specific surface area (at T < 100 K), absorbed on interstitial sites in a host metal (at ambient pressure and temperature), chemically bond in covalent and ionic compounds (at ambient pressure), oxidation of reactive metals e.g. Li, Na, Mg, Al, Zn with water. These metals easily react with water to the corresponding hydroxide and liberate the hydrogen from the water. Finally, the metal hydroxides can be thermally reduced to the metals in a solar furnace.     

Catalysts for decomposing ozone tail gas

The preparation of immobilizing-catalysts for decomposing ozone by using dipping method was studied. XRD, XPS and TEM were used to characterize the catalysts. The three kinds of catalysts were selected preferentially, and their catalytic activities were investigated. The results showed that the catalyst with activated carbon dipping acetate( active components are Mn:Cu = 3:2, active component proportion in catalyst is 15%, calcination temperature is 200℃ ) has the best catalytic activity for ozone decomposing. One gram of catalyst can decompose 17.6g ozone at initial ozone concentration of 2.5g/m^3 and the residence time in reactor of 0.1s. The experimental results also indicated that humidity of reaction system had negative effect on catalytic activity.