Chlorine promotes antimony volatilization in municipal waste incineration

Antimony volatilization in municipal waste incineration was studied. Two municipal waste samples and antimony(III) oxide (Sb₄O₆) were heated to 500°C and 700°C in an air stream in a quartz furnace. The volatilization of Sb₄O₆ occurred more at 700°C that at 500°C. Conversely, antimony volatilization form municipal waste was stronger at 500°C than at 700°C. This implies that antimony from municipal waste is volatilized as chloride instead of oxide. The chlorine sources for antimony chlorination, a gas-phase reaction involving hydrochloric acid and a solid-phase reaction of inorganic chlorine, e.g., CaCl₂, were compared. Only the solid-phase reaction could offer enough active chlorine to induce chlorination of antimony oxide. Received: July 2, 1998 / Accepted: January 28, 1999     

Levels and regional trends of persistent organochlorines and polybrominated diphenyl ethers in Asian breast milk demonstrate POPs signatures unique to individual countries

Human breast milk samples collected in 2007–2008 from four countries, Vietnam (Hanoi), China (Beijing), Korea (Seoul) and Japan (Sendai, Kyoto and Takayama), were analyzed for persistent organic pollutants (POPs) such as dichlorodiphenyltrichloroethane and its metabolites (DDTs), chlordane-related compounds (CHLs), hexachlorocyclohexanes (HCHs), hexachlorobenzene (HCB), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). Comparing with previous surveys, the present study indicates that the DDTs in breast milk from China and Vietnam had gradually decreased during the last decade, but were still 5–10 times higher than those in other nations. The ratios of p,p′-DDE/p,p′-DDT and o,p′-DDT/p,p′-DDT were higher in Beijing than in the other countries, suggesting that there is less fresh intake of commercial DDT products and a possible exposure to dicofol in China. CHL and PCB levels were relatively higher in mothers from Japan, whereas β-HCH and HCB were more common in Chinese women. In Japan, it is suspected that mothers in the urban/coastal area (Sendai) were more continuously exposed to organochlorine pesticides (OCPs) than mothers in the rural/inland area (Takayama). In addition, OCP levels in primiparae were significantly higher than those in multiparae from Japan and Korea. These indicate that both parity and regional factors are major determinants of the levels of OCPs and PCBs in human milk. On the other hand, higher concentrations of PBDEs were observed in mothers' milk from Korea. The congener was dominated by BDE-47 (43–54%), followed by BDE-153 (23–33%) in all regions except for Beijing where BDE-28 (23%) was relatively abundant. In Japanese breast milk, regional and parity-dependent distributions were not observed for PBDEs. Among PBDE congeners, age-dependency was observed for BDE-153, which was negatively correlated (p < 0.05) to the age of mothers in Kyoto (17 participants were housewives), while it increased with age in Sendai (10 participants were clerks). No such correlation was seen for BDE-47, indicating that BDE-47 was ingested and assimilated via different kinetics or routes from BDE-153 in Japan.     

Contribution of transboundary air pollution to ionic concentrations in fog in the Kinki Region of Japan

To estimate the contribution of transboundary transported air pollutants from other Asian countries to Japan in ionic concentrations in fog water in March 2005, the Community Multiscale Air Quality (CMAQ) modeling system was utilized with meteorological fields produced by the 5th generation Mesoscale Model (MM5). For meteorological predictions, the model well reproduced the surface meteorological variables, particularly temperature and humidity, and generally captured fog occurrence. For chemical predictions, most of the model-predicted monthly mean concentrations were approximately within a factor of 2 of the observations, indicating that the model well simulated the long-range atmospheric transport from the Asian Continent to Japan. For SO₄^2?, NO₃^? and NH₄⁺, the contribution rates of the transboundary air pollution in the Kinki Region of Japan ranged from 69 to 82% for aerosols, from 47 to 87% for ionic concentrations in rain, and from 55 to 79% for ionic concentrations in fog. The study found that the transboundary air pollution also affected ionic concentrations in fog as well as aerosol concentrations and ionic concentrations in rain.     

Water quality assessment of river Hindon at Ghaziabad, India: impact of industrial and urban wastewater

Spontaneous combustion on industrial-scale stockpiles causes environmental problems and economic losses for the companies consuming large amounts of coal. In this study, an effective monitoring and prediction system based on internet was developed and implemented to prevent losses and environmental problems. The system was performed in a coal stockpile with 5 m width, 10 m length, 3 m height, and having 120 t of weight. The inner temperature data of the stockpile was recorded by 17 temperature sensors placed inside the stockpile at certain points. Additionally, the data relating to the air temperature, air humidity, atmospheric pressure, wind velocity, and wind direction that are the parameters affecting the coal stockpile were also recorded. The recorded values were analyzed with artificial neural network and Statistical modeling methods for prediction of spontaneous combustion. Real-time measurement values and model outputs were published with a web page on internet. The internet-based system can also provide real-time monitoring (combustion alarms, system status) and tele-controlling (Parameter adjusting, system control) through internet exclusively with a standard web browser without the need of any additional software.     

Difference in concentration trends of airborne particulate matter during rush hour on weekdays and Sundays in Tokyo,Japan

Suspended particulate matter (SPM) and fine particulate matter (less than or equal to 2.5 μm: PM_2.5) have generally been decreasing for the last decade in Tokyo, Japan. To elucidate the major cause of this decrease, the authors investigated the different trends of airborne particulates (both SPM and PM_2.5 concentrations) by evaluating comparisons based on the location of the monitoring stations (roadside vs. ambient), days of the week (weekdays vs. Sundays), and daily fluctuation patterns (2002 vs. 2010). Hourly mean SPM and PM_2.5 concentrations were obtained at four monitoring stations (two roadside stations, two ambient stations) in Tokyo, Japan. Annual mean concentrations of each day of the week and of each hour of the day from 2002 to 2010 were calculated. The results showed that (1) the daily differences in annual mean concentration decreased only at the two roadside monitoring stations; (2) the high hourly mean concentrations observed on weekdays during the daily rush hour at the two roadside monitoring stations observed in 2002 diminished in 2010; (3) the SPM concentration that decreased the most since 2002 was the PM_2.5 concentration; and (4) the fluctuation of hourly concentrations during weekdays at the two roadside monitoring stations decreased. A decreasing trend of airborne particulates during the daily rush hour in Tokyo, Japan, was observed at the roadside monitoring stations on weekdays since 2002. The decreasing PM_2.5 concentration resulted in this decreasing trend of airborne particulate concentrations during the daily rush hours on weekdays, which indicates fewer emissions were produced by diesel vehicles.

ImplicationsThe authors compared the trends of SPM and PM_2.5 in Tokyo by location (roadside vs. ambient), days of the week (weekdays vs. Sundays), and daily fluctuation patterns (2002 vs. 2010). The high hourly mean concentrations observed at the roadside location during rush hour on weekdays in 2002 diminished in 2010. The SPM concentration that decreased during rush hour the most was the PM_2.5 concentration. This significant decrease in the PM_2.5 concentration resulted in the general decreasing trend of SPM concentrations during the rush hours on weekdays, which indicates fewer emissions were produced from diesel vehicles.     

Driver exposure to particulate matter in Bangkok

The aims of this study were to determine the particulate matter with aerodynamic diameters > or = 2.5 microm (PM2.5) and 2.5-10 microm (PM10-2.5) exposure levels of drivers and to analyze the proportion of elemental carbon (EC) and organic carbon (OC) in PM2.5 in Bangkok, Thailand. Four bus routes were selected. Measurements were conducted over 10 days in August (rainy season) 2008 and 8 days in January (dry season) 2009. The mean PM2.5 exposure level of the Tuk-tuk drivers was 86 microg/m3 in August and 198 microg/m3 in January. The mean for the non-air-conditioned bus drivers was 63 microg/m3 in August and 125 microg/m3 in January. The PM2.5 and PM10-2.5 exposure levels of the drivers in January were approximately twice as high as those in August. The proportion of total carbon (TC) in PM2.5 to the PM2.5 level in August (0.97 +/- 0.28 microg/m3) was higher than in January (0.65 +/- 0.13 microg/m3). The proportion of OC in the TC of the PM2.5 in August (0.51 +/- 0.08 microg/m3) was similar to that in January (0.65 +/- 0.07 microg/m3). The TC exposure by PM25 in January (81 +/- 30 microg/m3) remained higher than in August (56-21 microg/m3). The mean level of OC in the PM2.5 was 29 +/- 13 microg/m3 in August and 50 +/- 24 microg/m3 in January. In conclusion, the PM exposure level in Bangkok drivers was higher than that in the general environment, which was already high, and it varied with the seasons and vehicle type. This study also demonstrated that the major component of the PM was carbon, likely derived from vehicles.     

Analysis of building environment assessment frameworks and their implications for sustainability indicators

Green construction is gaining increasing attention in the global context. However, the construction of sustainable green buildings and environments involves different tools and systems and diverse perspectives. Therefore, the development of environmental assessment tools is an important task for managing green housing and green building projects. In this paper, we discuss the benefits, limitations, and future directions of the assessment framework. There are four characteristics of building environmental assessment, i.e., comprehensiveness, design guideline, signaling, and communication tools, which afford both benefits and limitations. We illustrate the role of the assessment framework as a hub promoting integration of diverse knowledge, as a design guideline encouraging better design and action, as signaling environmentally friendly design and action, and as a communication tool. On the other hand, there are limitations, such as the use of a mixture of quantitative and qualitative measures, ambiguity of weighing, lack of financial evaluation, and lack of involvement of diverse disciplines and stakeholders. To develop an effective assessment framework, the following three factors must be considered: knowledge, power, and implementation. We propose that knowledge innovation, a credible approach for a salient solution, and collective action represent the future challenges of the assessment framework.     

Phosphorus recovery from secondary effluent and side-stream liquid in a sewage treatment plant using zirconium-loaded saponified orange waste

Zirconium was loaded onto orange waste, a cheap and available agricultural waste in Japan, to investigate the feasibility of its utilization for phosphorus recovery from secondary effluent and side-stream liquid, which contain 5.9 and 68.2 mg/dm³ phosphorus, respectively. The phosphorus removal from side-stream liquid by using zirconium-loaded saponified orange waste (Zr-SOW) gel increased with an increasing solid/liquid ratio, and it was found that Zr-SOW gel showed better performance than zirconium ferrite. The prepared adsorbent was effective for phosphorus removal and exhibited a reasonably high adsorption capacity, twice than that of zirconium ferrite. The secondary effluent was treated in a column packed with Zr-SOW gel, and an dynamic adsorption capacity of 1.3 mol-P/kg was attained. The adsorbed phosphorus from the column was successfully eluted as a concentrated form by using a small amount of 0.2 M NaOH. Throughout the elution process, zirconium was not leaked from the adsorption gel.     

Leaching of heavy metals by citric acid from fly ash generated in municipal waste incineration plants

The leaching behavior of heavy metals from municipal waste incineration (MWI) fly ash was investigated in this study. The leaching process includes two steps, i.e., fly ash was firstly washed with water, and then subjected to citric acid leaching. The main parameters of the washing process such as liquid/solid ratio, washing time, and number of washing were tested. The optimum conditions for water washing were found as follows: washing time 5–10 min, liquid/solid ratio 10:1 (ml:g), and number of washing was twice; under these conditions, 86% Na, 70% K, 12% Ca, 1.2% Al, and 0.5% Pb were removed from the fly ash in the prewashing. From the results of screening tests of leaching lixiviants, citric acid was found to be the most effective leaching agent, taking account of its environmentally benign characteristics. Optimum metal extraction can be achieved with citric acid under the following conditions: pH 3.0, liquid/solid ratio 40 (ml:g), citric acid concentration 0.10 mol/dm³, contact time 20 min at room temperature.