Issue Cycles in Corporate Sustainability Reporting: A Longitudinal Study

Issue cycles in media reporting and in the coverage of environmental news in particular have been studied since the 1970s. This study seeks to extend existing theory on issue-attention lifecycles from the news-media domain to the corporate domain by exploring how companies operationalize environmental sustainability over time. Using computer-assisted text analysis, this study investigates 744 corporate environmental reports in a 10-year longitudinal design in order to study how the attention that companies pay to a set of 13 environmental issues shifts over this period. The results indicate discernible issue cycles for almost all of the issues studied. Some issues are in a phase of heightened awareness, others in a punctuated equilibrium following specific events, and even others in a phase of decline. The issue cycles identified suggest that companies pursue their environmental strategies consistently, but shift attention to particular issues as a response to high-profile environmental events. Policy-makers therefore need to be aware of the slowness of changes in corporate environmental strategies.     

The role of hydrodynamics, matrix and sampling duration in passive sampling of polar compounds with Empore SDB-RPS disks

There is an increasing need to monitor concentrations of polar organic contaminants in the aquatic environment. Integrative passive samplers can be used to assess time weighted average aqueous concentrations, provided calibration data are available and sampling rates are known. The sampling rate depends on environmental factors, such as temperature and water flow rate. Here we introduce an apparatus to investigate the sampling properties of passive samplers using river-like flow conditions and ambient environmental matrices: river water and treated sewage effluent. As a model sampler we selected Empore SDB-RPS disks in a Chemcatcher housing. The disks were exposed for 1 to 8 days at flow rates between 0.03 and 0.4 m s(-1). Samples were analysed using a bioassay for estrogenic activity and by LC-MS-MS target analysis of the pharmaceuticals sulfamethoxazole, carbamazepine and clarithromycin. In order to assess sampling rates of SDB disks, we also measured aqueous concentrations of the pharmaceuticals. Sampling rates increased with increasing flow rate and this relationship was not affected by the environmental matrix. However, SDB disks were only sampling in the integrative mode at low flow rates <0.1 m s(-1) and/or for short sampling times. The duration of linear uptake was particularly short for sulfamethoxazole (1 day) and longer for clarithromycin (5 days). At 0.03 m s(-1) and 12-14 degrees C, the sampling rate of SDB disks was 0.09 L day(-1) for clarithromycin, 0.14 L day(-1) for sulfamethoxazole and 0.25 L day(-1) for carbamazepine. The results show that under controlled conditions, SDB disks can be effectively used as passive sampling devices.     

Carbon monoxide and carbon dioxide concentrations in Santiago de Chile associated with traffic emissions

CO/CO₂ ratios have been measured in different locations of Santiago de Chile city. Measurements were carried out in a tunnel (prevailing emissions from cars with catalytic converter) and close to heavy traffic streets. Concentrations measured along the city traffic tunnel or temporal profiles of concentrations measured near heavy traffic streets allow an estimation of CO/CO₂ ratios emitted from mobile sources. Values obtained range from 0.0045 ± 0.0006 to 0.0100 ± 0.0004 and depend on the prevailing type of mobile sources. In particular, lowest values were found close to a street with heavy traffic dominated by diesel-powered public transportation, while the highest values were found at the city tunnel. Places located near streets of mixed mobile sources (public buses and cars) showed intermediate values. Average CO/CO₂ ratios are compatible with emission factors proposed for Santiago’s main mobile sources.     

Noninvasive heavy metal pollution assessment by means of Iberian wolf (Canis lupus signatus) hair from Galicia (NW Spain): a comparison with invasive samples

The current study represents the first investigation of the suitability of wolf hair as indicator tissue for metal exposure and accumulation within NW Spanish ecosystems. Dead animals, which were not specifically killed for these purposes, were necropsied, and further toxicological analyses were performed in order to establish the heavy metal content (Pb, Cd, and Zn) in liver, kidney, and hair, by means of inductively coupled plasma optical emission spectrometry. Two different factors, gender and age, were considered in order to determine their influence on heavy metal accumulation. Mean liver, kidney and hair concentrations of both toxic element, Cd (0.528, 2.692, and 0.026 ppm) and Pb (4.108, 0.031, and 0.196 ppm) considered on a dry weight basis, were situated below the established as acute toxicity levels for mammals. The highest concentrations were quantified for Zn, with means ranging from a maximum in hair samples (150.9 ppm) to a minimum in kidney samples (25.81 ppm). When the variable of gender and age were considered, female and adult wolves had higher concentrations of Cd in all the considered organs, although differences were only statistically significant for kidney. Neither the sex nor the age had a significant effect on Pb and Zn concentrations. A significant positive correlation (p?<?0.05) was identified between hair and liver Pb concentrations, as well as between hair and kidney Cd concentrations, thus suggesting the interest of the noninvasive sample for future ecotoxicological biomonitoring studies.     

Analytik von Mineralölkohlenwasserstoffen: Die Problematik der Probenaufbereitung

For the determination of mineral oil hydrocarbons in water and soil, IR-as well as GC/FID-methods (DEV H-18, ISO/TR 11046, NEN 5733) are used. Independent of the measurement method, different clean-up procedures are prescribed in these standard methods. Aluminium oxide, silica gel and magnesium silicate (Florisil^®) are used as adsorbents. This article describes the problems of clean-up occurring in mineral oil analysis using selected substances. Tests concerning the type of adsorbent, extract medium, clean-up-technique and extract/adsorbent-ratio are presented. It will be shown that the clean-up procedure has to be counted as a significant factor of influence in the determination of mineral oil hydrocarbons. The sources of errors resulting from clean-up as well as the possibilities to avoid them are presented. An extraction solvent for soils which is simple to handle and optimally adjustable to the requirements of the clean-up procedure is presented.     

Comparison of Extraction Methods for the Detection of Tick-Borne Encephalitis Virus RNA in Goat Raw Milk and Cream Cheese

Food and Environmental Virology - Infection with the tick-borne encephalitis virus (TBEV) can cause meningitis, meningoencephalitis and myelitis in humans. TBEV is an enveloped RNA virus of the...     

Fines migration from soil daily covers in Hong Kong landfills

Laboratory tests using 240 mm diameter columns were conducted to study fines migration in conditions that simulate daily soil covers in Hong Kong municipal solid waste landfills. Five factors suspected to affect fines migration were examined: moisture content at soil compaction, overburden pressure, pumping rate, cover thickness, and soil-waste interface condition. The results show that moisture content at compaction, cover thickness, and soil-waste interface are the most influential parameters on fines migration in completely decomposed granite daily covers. The measured equivalent sizes of migratory fines from the soil covers were in the range of 4–140 μm. The majority of migratory fines migrated during first permeations, representing 64–86% of the total by mass. Larger particles tended to migrate from the soil mass during the saturation process. In a typical run, about 0.0018% of the total cover soil (by dry weight) was washed out during a typical 1 h rainfall event. The results of the laboratory studies point to important engineering implications on the operation of local MSW landfills regarding the use of sandy daily covers.     

Flux-based assessment at a manufacturing site contaminated with trichloroethylene

Groundwater and contaminant fluxes were measured, using the passive flux meter (PFM) technique, in wells along a longitudinal transect passing approximately through the centerline of a trichloroethylene (TCE) plume at a former manufacturing plant located in the Midwestern US. Two distinct zones of hydraulic conductivity were identified from the measured groundwater fluxes; a 6-m-thick upper zone ( approximately 7 m to 13 m below the ground surface or bgs) with a geometric mean Darcy flux (q(0)) of 2 cm/day, and a lower zone ( approximately 13 m to 16.5m bgs) with a q(0) approximately 15 cm/day; this important hydrogeologic feature significantly impacts any remediation technology used at the site. The flux-averaged TCE concentrations estimated from the PFM results compared well with existing groundwater monitoring data. It was estimated that at least 800 kg of TCE was present in the source zone. The TCE mass discharge across the source control plane (85 m x 38 m) was used to estimate the "source strength" ( approximately 365 g/day), while mass discharges across multiple down-gradient control planes were used to estimate the plume-averaged, TCE degradation rate constant (0.52 year(-1)). This is close to the rate estimated using the conventional centerline approach (0.78 year(-1)). The mass discharge approach provides a more robust and representative estimate than the centerline approach since the latter uses only data from wells along the plume centerline while the former uses all wells in the plume.