Identification of environmentally vulnerable areas with priority for prevention and management of pipeline crude oil spills

The oil industry is one of the main productive activities in Mexico and has a huge infrastructure, including a wide pipeline network that crosses urban, industrial, agricultural and natural areas. The threat of crude oil spills is greatest in those regions with a high concentration of oil extraction and refining activities, as in the case of the Coatzacoalcos and Tonalá Rivers Low Basin. This study ranked the geosystems of the basin in terms of vulnerability to pipeline crude oil spills. Very high vulnerability (level I) was assigned to the water bodies (lakes and rivers) and their margins of influence, including surfaces that flood during normal hydraulic load. High vulnerability areas (level II) comprised surfaces that can flood during extraordinary hydraulic load related with extreme hydrometeorological events. The remaining three vulnerability levels were defined for areas with low or negligible flooding potential, these were ranked according to physical (slope, relief and permeability), biological (richness, singularity and integrity) and socio-economic (social marginalization index and economic activities index) conditions. These results are presented on a map for better visualization and interpretation. This study will be useful to establish preventive and effective emergency management actions in order to reduce remediation costs and adverse effects on wild species. It also can help local and national authorities, oil industry and civil protection corps to better protect ecosystems, natural resources and human activities and goods.     

Simultaneous removal of chromium and arsenate from contaminated groundwater by ferrous sulfate: Batch uptake behavior

Chromium and/or arsenate removal by Fe(II) as a function of pH, Fe(II) dosage and initial Cr(VI)/As(V) ratio were examined in batch tests. The presence of arsenate reduced the removal e ciency of chromium by Fe(II), while the presence of chromate significantly increased the removal e ciency of arsenate by Fe(II) at pH 6–8. In the absence of arsenate, chromium removal by Fe(II) increased to a maximum with increasing pH from 4 to 7 and then decreased with a further increase in pH. The increment in Fe(II) dosage resulted in an improvement in chromium removal and the improvement was more remarkable under alkaline conditions than that under acidic conditions. Chromium removal by Fe(II) was reduced to a larger extent under neutral and alkaline conditions than that under acidic conditions due to the presence of 10 mol/L arsenate. The presence of 20 mol/L arsenate slightly improved chromium removal by Fe(II) at pH 3.9–5.8, but had detrimental e ects at pH 6.7–9.8. Arsenate removal was improved significantly at pH 4–9 due to the presence of 10 mol/L chromate at Fe(II) dosages of 20–60 mol/L. Elevating the chromate concentration from 10 to 20 mol/L resulted in a further improvement in arsenate removal at pH 4.0–4.6 when Fe(II) was dosed at 30–60 mol/L.     

Protective shade, tree diversity and soil properties in coffee agroforestry systems in the Atlantic Rainforest biome

Sustainable production and biodiversity conservation can be mutually supportive in providing multiple ecosystem services to farmers and society. This study aimed to determine the contribution of agroforestry systems, as tested by family farmers in the Brazilian Rainforest region since 1993, to tree biodiversity and evaluated farmers’ criteria for tree species selection. In addition, long-term effects on microclimatic temperature conditions for coffee production and chemical and biological soil characteristics at the field scale were compared to full-sun coffee systems. A floristic inventory of 8 agroforests and 4 reference forest sites identified 231 tree species in total. Seventy-eight percent of the tree species found in agroforests were native. The variation in species composition among agroforests contributed to a greater γ-diversity than α-diversity. Monthly average maximum temperatures were approximately 6 °C higher in full-sun coffee than in agroforests and forests. Total soil organic C, N mineralization and soil microbial activity were higher in forests than in coffee systems, whereas the chemical and biological soil quality in agroforests did not differ significantly from full-sun coffee after 13 years. Given its contribution to the conservation of biodiversity and its capacity to adapt coffee production to future climate change, coffee agroforestry offers a promising strategy for the area.     

Potential Risk of Norovirus Infection Due to the Consumption of “Ready to Eat” Food

In this study, we investigated the presence of enteric viruses such as norovirus (NoV), hepatitis A virus (HAV), hepatitis E virus (HEV), and adenovirus (HAdV), in vegetables available on the Italian markets. For this aim, 110 national and international ??ready to eat?? samples were collected and analyzed by biomolecular tests and positive samples were confirmed by sequencing. All samples (100?%) were negative for HAV, HEV, and HAdV, while 13.6?% (15/110) were positive for NoV. Actually there is not a formal surveillance system for NoV infections in Italy but we clearly demonstrated a potential risk associated with the consumption of ??ready to eat?? vegetables. This study confirmed for the first time in Italy the presence of norovirus in semi-dried tomatoes by PCR technique.     

Influence of support on catalytic behavior of nickel catalysts in the steam reforming of ethanol for hydrogen production

Al₂O₃, MgO, SiO₂ and ZnO-supported nickel catalysts were prepared and evaluated in the ethanol steam reforming for hydrogen production. It is shown that the catalytic behavior can be influenced depending on the experimental conditions employed and chemical composition of the catalyst.     

Integration of post-combustion capture and storage into a pulverized coal-fired power plant

Post-combustion CO₂ capture and storage (CCS) presents a promising strategy to capture, compress, transport and store CO₂ from a high volume–low pressure flue gas stream emitted from a fossil fuel-fired power plant. This work undertakes the simulation of CO₂ capture and compression integration into an 800 MW_e supercritical coal-fired power plant using chemical process simulators. The focus is not only on the simulation of full load of flue gas stream into the CO₂ capture and compression, but also, on the impact of a partial load. The result reveals that the energy penalty of a low capture efficiency, for example, at 50% capture efficiency with 10% flue gas load is higher than for 90% flue gas load at the equivalent capture efficiency by about 440 kWh_e/tonne CO₂. The study also addresses the effect of CO₂ capture performance by different coal ranks. It is found that lignite pulverized coal (PC)-fired power plant has a higher energy requirement than subbituminous and bituminous PC-fired power plants by 40.1 and 98.6 MW_e, respectively. In addition to the investigation of energy requirement, other significant parameters including energy penalty, plant efficiency, amine flow rate and extracted steam flow rate, are also presented. The study reveals that operating at partial load, for example at half load with 90% CO₂ capture efficiency, as compared with full load, reduces the energy penalty, plant efficiency drop, amine flow rate and extracted steam flow rate by 9.9%, 24.4%, 50.0% and 49.9%, respectively. In addition, the effect of steam extracted from different locations from a series of steam turbine with the objective to achieve the lowest possible energy penalty is evaluated. The simulation shows that a low extracted steam pressure from a series of steam turbines, for example at 300 kPa, minimizes the energy penalty by up to 25.3%.     

Influences of redox transformation, metal complexation and aggregation of fulvic acid and humic acid on Cr(VI) and As(V) removal by zero-valent iron

This study investigated the removal kinetics and mechanisms of Cr(VI) and As(V) by Fe(0) in the presence of fulvic acid (FA) and humic acid (HA) by means of batch experiments. The focus was on the involvements of FA and HA in redox reactions, metal complexation, and iron corrosion product aggregation in the removal of Cr(VI) and As(V) removal by Fe(0). Synthetic groundwater was used as the background electrolyte to simulate typical groundwater. The results showed faster Cr(VI) removal in the presence of HA compared to FA. Fluorescence spectroscopy revealed that no redox reaction occurred in the FA and HA. The results of the speciation modeling indicate that the free Fe(II) concentration was higher in the presence of HA, resulting in a higher removal rate of Cr(VI). However, the removal of As(V) was inhibited in the HA solution. Speciation modeling showed that the concentration of dissolved metal-natural organic matter (metal-NOM) complexes significantly affected the aggregation of the iron corrosion products which in turn affected the removal of As(V). The aggregation was found to be induced by gel-bridging of metal-NOM with the iron corrosion products. The effects of metal-NOM on the aggregation of the iron corrosion products were further confirmed by TEM studies. Larger sizes of iron corrosion products were formed in the FA solution compared to HA solution. This study can shed light on understanding the relationships between the properties of NOM (especially the content of metal-binding sites) and the removal of Cr(VI) and As(V) by Fe(0).     

Significance of metal exchange in EDDS-flushing column experiments

Chelating agents have been widely studied for extracting heavy metals from contaminated soils, and the effectiveness of EDDS ([S,S]-ethylene-diamine-disuccinic acid) has aroused extensive attention because of its biodegradability in the natural environment. However, in the course of EDDS-flushing, metal exchange of newly extracted metal-EDDS complexes with other sorbed metals and mineral cations may result in metal re-adsorption on the soil surfaces. Therefore, this study investigated the relative significance of metal exchange under different travel distances of chelant complexes, characteristics of soil contamination, and solution pH in the column experiments. As a result of metal exchange, the elution of Zn and Pb was retarded and the cumulative extraction was lower than those of Ni and Cu, especially over a longer travel distance. Compared with the field-contaminated soils, the effects of metal exchange were even more substantial in the artificially contaminated soil because of a greater amount of extractable metals and a larger proportion of weakly bound fractions. By contrast, metal exchange was insignificant at pH 8, probably due to less adsorption of metal-EDDS complexes. These findings highlight the conditions under which metal exchange of metal-EDDS complexes and the resulting impacts are more significant during EDDS-flushing.     

Zero-valent iron and iron oxide-coated sand as a combination for removal of co-present chromate and arsenate from groundwater with humic acid

The combination of zero-valent iron (Fe⁰) and iron oxide-coated sand (IOCS) was used to remove Cr(VI) and As(V) from groundwater in this study. The efficiency and the removal mechanism of Cr(VI) and As(V) by using this combination, with the influence of humic acid (HA), were investigated using batch experiments. Results showed that, compared to using Fe⁰ or IOCS alone, the Fe⁰-IOCS can perform better on the removal of both Cr(VI) and As(V). Metal extraction studies showed that As(V) was mainly removed by IOCS and iron corrosion products while Cr(VI) was mainly removed by Fe⁰ and its corrosion products. Competition was found between Cr(VI) and As(V) for the adsorption sites on the iron corrosion products. HA had shown insignificant effects on Cr(VI) removal but some effects on As(V) removal kinetics. As(V) was adsorbed on IOCS at the earlier stage, but adsorbed/coprecipitated with the iron corrosion products at the later stage.