Determination of 226Ra at ultratrace level in mineral water samples by sector field inductively coupled plasma mass spectrometry

An analytical procedure has been proposed for the determination of (226)Ra at the low femtogram per ml concentration level in mineral water samples using double focusing sector field ICP-MS (ICP-SFMS). For the pre-concentration and separation of radium from the matrix elements in water a tandem of a laboratory-prepared filter, based on MnO(2), and Eichrom "Sr-specific" resin was used. The recovery of the method was determined to be 70.5%. The limit of detection for (226)Ra determination was 0.02 fg ml(-1), including a pre-concentration factor of 10. In addition, uranium concentration and uranium isotope ratios were measured by ICP-SFMS. In several mineral water samples with a relatively high uranium content, (226)Ra concentrations were found between 0.7-15 fg ml(-1). The effective dose of the contribution was calculated using the radionuclide concentration and dose conversion factors from the World Health Organization, WHO (1993). Assuming a mineral water consumption of 2 l d(-1), a slightly higher calculated dose than the suggested limit for drinking water (0.1 mSv y(-1)) was found in some samples.     

Importance of set-aside for breeding birds of open farmland in Finland

The set-aside obligation under the Common Agricultural Policy (CAP) brought widespread benefits for wild farmland species. Shortly after it was abolished in 2008, the national political process in Finland replaced it with a targeted agri-environment scheme for environmental fallow. Though potentially highly valuable, the value of the current scheme for securing biodiversity is yet to be confirmed. This study evaluates the importance of set-asides established under CAP to all birds of open farmland based on national monitoring data from 2001 to 2006. The set-aside fields supported 25-40% more species and held 60-105% more pairs of birds typical of open farmland in comparison with cereal fields within a similar landscape setting. The estimated effect of set-aside presence in farmland on the studied bird species is large enough to trigger considerable changes in bird populations on the national scale. The relevance of the results to the novel agri-environment scheme is discussed.     

Source apportionment of polycyclic aromatic hydrocarbons in Lake Baikal water and adjacent air layer

The composition of polycyclic aromatic hydrocarbons (PAHs) in Lake Baikal water and adjacent air layer and PAH emission composition profiles of possible sources were investigated. Analysis of emission composition data showed that the source profiles could not be grouped by fuel type or pyrogenic/petrogenic origin. Because of the similarity of source PAH profiles, the drawing of 3D mixing diagrams was the only way to check whether some of the potential PAH sources were the true sources. The mixing diagrams showed that the sources of air pollution were paper mills and wood burning and that the sources of water pollution were coal-fired and oil-fired boilers. The common source for both air and water was only oil and petroleum products. To determine the locations of PAH sources, their contributions to air and water pollution were calculated and mapped. Based on the results, air and water were polluted from both local and regional sources. The location of the zone influenced by a particular source was conditioned by physical properties of source emission, direction of air/water flows that transfer PAHs and temperature differences between mixing air/water flows.     

Socio-economic Impacts on Flooding: A 4000-Year History of the Yellow River, China

We analyze 4000-year flood history of the lower Yellow River and the history of agricultural development in the middle river by investigating historical writings and quantitative time series data of environmental changes in the river basin. Flood dynamics are characterized by positive feedback loops, critical thresholds of natural processes, and abrupt transitions caused by socio-economic factors. Technological and organizational innovations were dominant driving forces of the flood history. The popularization of iron plows and embankment of the lower river in the 4th century BC initiated a positive feedback loop on levee breaches. The strength of the feedback loop was enhanced by farming of coarse-sediment producing areas, steep hillslope cultivation, and a new river management paradigm, and finally pushed the flood frequency to its climax in the seventeenth century. The co-evolution of river dynamics and Chinese society is remarkable, especially farming and soil erosion in the middle river, and central authority and river management in the lower river.     

Geochemical and solute transport modelling for CO2 storage, what to expect from it?

Geochemistry plays an important role when assessing the impact of CO₂ storage. Due to the potential corrosive character of CO₂, it might affect the chemical and physical properties of the wells, the reservoir and its surroundings and increase the environmental and financial risk of CO₂ storage projects in deep geological structures. An overview of geochemical and solute transport modelling for CO₂ storage purposes is given, its data requirements and gaps are highlighted, and its progress over the last 10 years is discussed. Four different application domains are identified: long-term integrity modelling, injectivity modelling, well integrity modelling and experimental modelling and their current state of the art is discussed. One of the major gaps remaining is the lack of basic thermodynamical and kinetic data at relevant temperature and pressure conditions for each of these four application domains. Real challenges are the coupled solute transport and geomechanical modelling, the modelling of impurities in the CO₂ stream and pore-scale modelling applications.     

From data and theory to environmental models and indices formation

A prerequisite for environmental indices is that they represent environmental pressure, and the state of, and impact on environmental conditions. In other words, they should capture as much as possible of the cause-effect chains they represent and relate pressure and effect to criteria of environmental quality. The approach proposed in the article attempts to link the pressure–state–impact–response framework of indicators to the integrated environmental model, based on the method of response function (MRF). The MRF allows to construct purposeful, credible models from data and prior knowledge or information. The data are usually time series observations of system inputs and outputs, and sometimes of internal states. The output of such models is presented with highly aggregated environmental indices, reflecting the main pressure–state–impact–response cause-effect chains. The proposed approach is illustrated with the example of soil erosion indices.