Singlet oxygen generation by photoactive polymeric microparticles with enhanced aqueous compatibility

Two new photoactive materials compatible with environmentally friendly solvents (water and methanol) have been synthesized and characterized. They are comprised of a porous matrix of polystyrene and divinylbenzene with bound Rose Bengal and additional pendant groups added to increase the hydrophilicity (ethylenediamine and γ-gluconolactone). The new polymers are efficient photocatalysts capable of generating singlet oxygen after irradiation with visible light. Photochemical oxygenations of 9,10-anthracenedipropionic acid and 2-furoic acid have been carried out. The measured conversions indicate that the new supported photosensitizers are more effective than the parent hydrophobic polymer. Figure

New photoactive polymers for oxidations in aqueous solvent     

Exposure to chemical mixtures in Mexican children: high-risk scenarios

In developing countries, the management of environmental toxicants is inadequate, thus, humans may be exposed to levels higher than normal levels (background levels). Therefore, the aim of this study was to evaluate the exposure level of Mexican children to dichlorodiphenyltrichloroethane (DDT), dichlorodiphenyldichloroethylene (DDE), lead, and polycyclic aromatic hydrocarbons [using 1-hydroxypyrene (1-OHP) as exposure biomarker] and to assess the percentage of children exposed to these four compounds at concentrations higher than normal in each community studied. We performed random sampling in eight communities in Mexico (five communities in Chiapas State and three communities in San Luis Potosi State). DDT and DDE were analyzed by gas chromatography/mass spectrometry, the quantification of lead in blood was performed using atomic absorption spectrophotometry, and 1-OHP analyses were performed using HPLC with a fluorescence detector. Elevated DDT, DDE, and 1-OHP levels were found in children living in the indigenous communities of Chiapas State, while higher blood lead levels were found in two communities in San Luis Potosí. Approximately 30 % of children living in Chiapas were exposed to all four compounds at concentrations above the guidelines for each compound, whereas 48 % of children studied were exposed to all four contaminants at concentrations higher than normal in a community in San Luis Potosí State. As expected, our results showed that in hot spots, children are exposed to levels higher than normal. Therefore, child environmental health programs are urgently needed.     

Wastewater treatment to enhance the economic viability of microalgae culture

Microalgae culture is still not economically viable and it presents some negative environmental impacts, concerning water, nutrient and energy requirements. In this context, this study aims to review the recent advances on microalgal cultures in wastewaters to enhance their economic viability. We focused on three different culture concepts: (1) suspended cell systems, (2) cell immobilization, and (3) microalgae consortia. Cultures with suspended cells are the most studied. The nutrient removal efficiencies are usually high for wastewaters of different sources. However, biomass harvesting is difficult and a costly process due to the small cell size and lower culture density. On the other hand, the cell immobilization systems showed to be the solution for this problem, having as main limitation the nutrient diffusion from bulk to cells, which results in a reduced nutrient removal efficiency. The consortium between microalgae and bacteria enhances the growth of both microorganisms. This culture concept showed to be a promising technology to improve wastewater treatment, regarding not only nutrient removal but also biomass harvesting by bioflocculation. The aggregation mechanism must be studied in depth to find the process parameters that would lead to an effective and cheap harvesting process.     

The influence of a real job on upper limb performance in motor skill tests: which abilities are transferred?

To investigate whether the specificities of real jobs create distinctions in the performance of workers in different motor tests for the upper limbs, 24 participants were divided into two groups according to their specific job: fine and repetitive tasks and general tasks. Both groups reproduced tasks related to aiming movements, handling and strength of the upper limbs. There were no significant differences between groups in the dexterity and performance of aiming movements. However, the general tasks group had higher grip strength than the repetitive tasks group, demonstrating differences according to job specificity. The results suggest that a particular motor skill in a specific job cannot improve performance in other tasks with the same motor requirements. The transfer of the fine and gross motor skills from previous experience in a job-specific task is the basis for allocating training and guidance to workers.     

Switching to alternative transit: combining bicycle safety improvements with parking regulations

Smart growth policies advocate for economically viable, environmentally conscientious, and socially equitable solutions for urban development. These policies were developed largely in response to issues rooted in the automobile-oriented culture: air pollution, high greenhouse gas emissions, traffic congestion, and sedentary lifestyles. In urban settings, a good transportation alternative is cycling, since it is able to serve the travel needs of nearly half of city dwellers’ daily trips. Many European and Canadian cities have successfully increased cycling rates by creating safer bicycle environments and restricting or discouraging automobile use. To evaluate the potential effects of the above measures on American urban areas, this paper examines case studies of cycle tracks and bicycle boulevards implemented in American cities, and how these facility improvements have changed how safe cyclists feel on the road and overall bicycle usage. Results show the two methods are indeed effective in increasing bicycle usage rates. Ultimately, increasing cycling rates needs policies to discourage people from driving, the greatest mode share in nearly all urban areas. Parking policy has major impacts on people’s decision to use the automobile. Currently, parking is oversupplied and underpriced in many cities, making it irresistible for people to drive. Decreasing the number of parking spaces available and increasing their price will increase pressure on drivers to drive less, especially for short trips, and to bike instead. It is important for planners and policy makers to realize that solutions from both directions, making biking more enjoyable and making parking, and hence driving, less affordable, should be used in tandem. The complementary nature of the two approaches makes it so the effect of the combination is greater than the sum of the two.     

Testing a stochastic version of the Beddington–DeAngelis functional response in foraging shore crabs

Current behaviour-based interference models assume that the predator population is infinitely large and that interference is weak. While the realism of the first assumption is questionable, the second assumption conflicts with the purpose of interference models. Here, we tested a recently developed stochastic version of the Beddington–DeAngelis functional response—which applies to a finite predator population without assuming weak interference—against experimental data of shore crabs (Carcinus maenas) foraging on mussels (Mytilus edulis). We present an approximate maximum likelihood procedure for parameter estimation when only one focal individual is observed, and introduce ‘correction factors’ that capture the average behaviour of the competing but unobserved individuals. We used the method to estimate shore crab handling time, interaction time, and searching rates for prey and competitor. Especially the searching rates were sensitive to variation in prey and competitor density. Incorporating constant parameter values in the model and comparing observed and predicted feeding rates revealed that the predictive power of the model is high. Our stochastic version of the Beddington–DeAngelis model better reflects reality than current interference models and is also amenable for modelling effects of interference on predator distributions.     

Modelling of coastal vulnerability in the stretch between the beaches of Porto de Mós and Falésia, Algarve (Portugal)

Coastal systems are characterized by high geophysical and biophysical sensitivity as being their massive occupation a serious issue concerning their self-regulation. Worldwide coastal areas are exposed to problems such as coastal erosion, degradation and destruction of marine habitats, pollution and rising sea level. Thus, it is crucial to design models of coastal vulnerability assessment to ensure a better management of coastal areas. This study characterizes the vulnerability of the coastal stretch between the beaches of Porto de Mós and Falésia in the Algarve, corresponding to 52?km of the south coast of Portugal. The expansion of urban areas was modelled using a Cellular Automata (CA) based approach. Results show that 65% of the coastal stretch has high and very high vulnerability caused by both physical and human factors. Results further indicate that urban growth may interfere with the natural evolution of the coastal geomorphology. The scenario of urban expansion for the year 2015 highlights the need to develop effective urban planning processes to ensure a correct balance between the geophysical resilience of coastal systems and the promotion of the coastal sector as a strategic asset for the regional and national economy.     

Simple and sequential extractions of heavy metals from different sewage sludges

The presence of heavy metals in the sludges produced in waste-water treatment plants restricts their use for agricultural purposes. This study looks at different types of sludges (aerobic, anaerobic, unstabilised and sludge from a waste stabilisation pond) and compares the distribution of the heavy metals they contain according to the treatment that they have undergone. Some agronomic parameters necessary for characterising a sludge as suitable for use as amendment were determined. The aim of this study is to compare the availability and the localisation of heavy metals in different sewage sludges using simple (water and DTPA) extraction and the BCR (Community Bureau of Reference) sequential extraction procedure. It was confirmed that the total concentration of heavy metals did not exceed the limits set out by European legislation and that the stabilisation treatment undergone by the sludges strongly influenced the heavy metal distribution and the phases to which they were associated and their bioavailability level. The DTPA extraction procedure is cheap and easy to perform and the obtained results are similar to those obtained with the sequential procedure.     

Production of zeolitic materials in pilot scale based on coal ash for phosphate and potassium adsorption in order to obtain fertilizer

Environmental Science and Pollution Research - The use of different types of zeolites (X, Na-P1, and 4A) synthesized by different methods and scales were tested in this work to adsorb nutrients...     

Efficient adsorption of carbon dioxide and methane on activated carbon prepared from glycerol with potassium acetate

In the context of global warming and the energy crisis, emissions to the atmosphere of greenhouse gases such as carbon dioxide (CO₂) and methane (CH₄) should be reduced, and biomethane from landfill biogas should be recycled. For this, there is a need for affordable technologies to capture carbon dioxide, such as adsorption of biogas on activated carbon produced from industrial wastes. Here we converted glycerol, a largely available by-product from biodiesel production, into activated carbon with the first use of potassium acetate as an activating agent. We studied adsorption of CO₂ and CH₄ on activated carbon. The results show that activated carbon adsorb CO₂ up to 20% activated carbon weight at 250 kPa, and 9% at atmospheric pressure. This is explained by high specific surface areas up to 1115 m²g⁻¹. Moreover, selectivity values up to 10.6 are observed for the separation of CO₂/CH₄. We also found that the equivalent CO₂ emissions from activated carbon synthesis are easily neutralized by their use, even in a small biogas production unit.