Photodegradation of the synthetic fragrance OTNE and the bactericide triclosan adsorbed on dried loamy sand--results from models and experiments

Fragrances such as OTNE (marketed as Iso-E-Super®) and bactericides such as triclosan (marketed as Igrasan) are present in waste water and thus finally sorbed to sewage sludge. With that sludge they can reach agricultural fields where they potentially can undergo photodegradation processes. In this study the photodegradation of OTNE and triclosan on dried loamy sand was measured under artificial sunlight conditions in laboratory experiments. These compounds were artificially added with concentrations of 1 μg g⁻¹ on pre-rinsed dried loamy sand. The decrease in concentration with light irradiation was measured for 32 d in comparison to soil samples without light irradiation. The estimated light source intensity was 27 W m⁻². Within the experiment, the apparent half-life was 7 and 17 d for OTNE and triclosan respectively. The decrease did not simply follow first-order kinetics. The apparent rate constant decreased in the latter stage of reaction, suggesting that part of the chemicals were inaccessible for degradation. Two models, i.e., a diffusion-limited model, and a light penetration-limited model, were used in comparison to the measured data to explain the observed degradation limitations in the latter stages of the experiments. Comparing the hereby obtained model parameters with estimated physico-chemical parameters for the soil and the two chemical compounds, the light penetration-limited model, in which the degradation in the soil surface layer is assumed to be limited due to the shading effect of light in the upper thin soil layer, showed to be the most realistic in describing the photodegradation.     

Analysis of atmospheric behavior of PCDDs/PCDFs by a one-compartment box model

The overall atmospheric behavior of PCDDs/PCDFs in the Kanto region, Japan, was simulated by a one-compartment box model. For each homologue the relative significance and temperature dependences of dry deposition, wet deposition, degradation, and advection in both gas and particulate phases were examined and compared. The results of the model calculation suggested that the rates for dry deposition are comparable to those for wet deposition, and the rates for advection are comparable to those for bulk (dry+wet) depositions in the Kanto region. On the other hand, the rates of degradation for PCDDs/PCDFs in the atmosphere in the Kanto region would be negligible. The emission rates and the bulk deposition fluxes in the entire Kanto region estimated by the model calculation based on observed air concentrations were 0.084-0.90 kg-TEQ/month and 0.045-0.43 kg-TEQ/month, respectively. These estimated emission rates and bulk deposition fluxes were slightly higher than the estimated emission rate based on observed emission concentrations and the estimated bulk deposition fluxes based on observed deposition fluxes collected on water deposition surface, respectively. This study showed the model calculation can be available for understanding of the overall atmospheric behavior, verification of the source inventory, and estimation of deposition flux on the actual environment including various deposition surfaces.     

Melting and incineration plants of municipal waste. Chemical and biochemical diagnosis of thermal processing samples (emission,residues)

Control of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in emissions and thermal residues from incinerators has been a cause of public concern for more than one decade. Recently, several studies showed that other persistent organic pollutants (POPs) such as coplanar polychlorinated biphenyls (co-PCBs) also have dioxin-like activity and are released from incinerators. Therefore, the present study was aimed at making a risk assessment about dioxin-like activity in extracts of thermal waste residues (e.g. combustion gas; fly ash, slag) from incineration and melting processes in Germany and Japan. For this purpose, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs), coplanar polychlorinated biphenyls (co-PCBs), polychlorinated naphthalenes (PCNs) and polyaromatic hydrocarbons (PAHs) were analyzed by chemical analysis. Additionally, 2, 3, 7, 8-TCDD equivalents (EROD-TEQs) were determined by in vitro Micro-EROD bioassay using rat H4IIE hepatoma cells. EROD-TEQs could be correlated to I-TEQ values (from PCDD/Fs/co-PCBs) analyzed by chemical analysis resulting in a maximal sixfold higher estimate. Our study indicates minor influences of co-PCBs, PAHs and PCNs to the sum of dioxin-like toxicity in the extracts of thermal waste residues as determined here. Furthermore, we showed that the levels of dioxins and co-PCBs contained in slag from melting processes and bottom ashes from incineration processes were lower by 1-2 orders of magnitude than that in fly ash.     

Water purification with sintered porous materials fabricated at 400℃ from sea bottom sediments

A sintering technology for preparing porous materials from sea bottom sediments was developed for use in water purification. The purpose of the present study was to develop methods for converting the sea bottom sediments dredged from Ago Bay into value-added recycled products. The sintered products fabricated at 400℃ were found to be very effective adsorbents for the removal of heavy metals.     

Evaluation of material recycling for plastics: environmental aspects

“Zero emissions” is a concept envisaging the creation of a sustainable society with minimal disposal of resources. In order to realize zero emissions for plastics, it is important to establish a method for quantitatively evaluating candidate recycling processes. In this study, the principle of the substitution factor (SF) is introduced. A quantitative evaluation of the recycling process for plastics was then carried out. The production process for monofilament plastics was examined. The recycling of plastics discarded during the production process could be substituted in small amounts for virgin materials, giving reduced CO₂ emissions. Furthermore, production using recycled material mixed with virgin material was more effective in reducing CO₂ emissions than when recycled materials only were used. Received: November 19, 1999 / Accepted: November 28, 2000     

Effects of the reduction of pollution emissions on the economic performance of firms: an empirical analysis focusing on demand and productivity

This paper analyzes whether the reduction of pollution emissions improves a firm’s economic performance through the increase in sales to environmentally conscious customers and the cost reductions associated with the improvement in productivity. Because the selection of the control (end-of-pipe) or prevention (cleaner production) approach differently influences the effect through the improvement in productivity, this is also considered. Using panel data for Japanese manufacturing firms over the period 2002–2008, the findings indicate that firms that have reduced their pollution emissions can increase their economic performance through the increase in demand for their products and an improvement in productivity. However, the latter is conditional, and so the prevention approach is preferred.     

Source and behavior analyses of dioxins based on congener-specific information and their application to Tokyo Bay basin

Identification of pollution sources and estimation of their contribution to dioxin pollution are important for taking better countermeasures against such sources. The information based on seventeen 2,3,7,8-chlorine-substituted congeners and 10 homologues is usually not sufficient for source identification. The usefulness of detailed congener-specific information of tetra- to octachlorinated polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans was examined by principal component analysis and compared with conventional dioxin information. It was revealed that congener-specific information was far more effective for source identification than conventional information. For source apportioning, it was shown that multiple regression analysis with detailed source congener profiles could be carried out successfully when calculations were performed for individual homologues. This was because of the large variation in homologue composition in source dioxin profiles in addition to the difference in environmental behavior among the homologues.The newly proposed methods for statistical analysis were applied to the estimation of dioxin mass balance in Tokyo Bay basin. It was found that Tokyo Bay sediment core contained dioxins from three major sources: combustion, pentachlorophenol (PCP), and chloronitrophen (CNP). PCP and CNP contained large amounts of dioxin as impurity and were used extensively as paddy field herbicides in Japan in the past. The total dioxin load from the two herbicides to the basin during the past 45 years (1951-1995) was estimated to be five times larger than that from combustion source in terms of toxic equivalents (WHO-TEQ). However, in the surface sediment of the bay, the contribution from the herbicides was nearly equal to that from combustion. The herbicide contribution peaked during the 1960s and 1970s and gradually decreased thereafter.     

Research for MSW flow analysis in developing nations

Developing nations have various problems regarding municipal solid waste (MSW). Therefore, to carry out a systematic review of the MSW problems in the target area and to formulate a well-considered management plan, it is extremely important to understand the present MSW flow in the region. One of the authors participated in the nine solid waste management (SWM) studies in developing nations undertaken under the technical cooperation program of the Japan International Cooperation Agency (JICA). Based on these studies, this paper reviews the results of research in developing countries regarding different MSW streams, the factors that cause the differences, and the elements considered to have the most impact on those streams. This research identifies several issues regarding MSW streams in developing nations. The MSW generation rate per capita in developing countries is generally said to grow in proportion to the GNP. However, the findings of this research show no correlation between the two; instead, there is a relationship between the GNP and the collection rate. To formulate proper future MSW management plans in countries with low collection rates, it is very important to forecast the rates of self-disposed and recycled waste, and their fluctuations. These are affected by urban structure, collection services, etc. Received: January 27, 2000 / Accepted: July 19, 2000