Estimation of internal radiation dose to the adult Asian population from the dietary intakes of two long-lived radionuclides

Daily dietary intakes of two naturally occurring long-lived radionuclides, 232Th and 238U, were estimated for the adult population living in a number of Asian countries, using highly sensitive analytical methods such as instrumental and radiochemical neutron activation analysis (INAA and RNAA), and inductively coupled plasma mass spectrometry (ICP-MS). The Asian countries that participated in the study were Bangladesh (BGD), China (CPR), India (IND), Japan (JPN), Pakistan (PAK), Philippines (PHI), Republic of Korea (ROK) and Vietnam (VIE). Altogether, these countries represent more than 50% of the world population. The median daily intakes of 232Th ranged between 0.6 and 14.4 mBq, the lowest being for Philippines and the highest for Bangladesh, and daily intakes of 238U ranged between 6.7 and 62.5 mBq, lowest and the highest being for India and China, respectively. The Asian median intakes were obtained as 4.2 mBq for 232Th and 12.7 mBq for 238U. Although the Asian intakes were lower than intakes of 12.3 mBq (3.0 ug) 232Th and 23.6 mBq (1.9 ug) 238U proposed by the International Commission on Radiological Protection (ICRP) for the ICRP Reference Man, they were comparable to the global intake values of 4.6 mBq 232Th and 15.6 mBq 238U proposed by the United Nation Scientific Commission on Effects of Radiation (UNSCEAR). The annual committed effective doses to Asian population from the dietary intake of 232Th and 238U were calculated to be 0.34 and 0.20 microSv, respectively, which are three orders of magnitude lower than the global average annual radiation dose of 2400 microSv to man from the natural radiation sources as proposed by UNSCEAR.     

A new generic sub-model for radionuclide fixation in large catchments from continuous and single-pulse fallouts, as used in a river model

This paper presents a new general sub-model for fixation in catchment areas to be used within the framework of a river model for substances such as radionuclides and metals from continuous and single-pulse fallouts. The model has been critically tested using data from 27 European river sites covering a very wide geographical area and contaminated by radiocesium and radiostrontium from the Chernobyl accident and from the nuclear weapons tests (NWT fallout). This modelling approach gives radionuclide concentrations in water (total, dissolved and particulate phases) at defined sites on a monthly basis. The overall river model is based on processes in the upstream river stretch and in the catchment area. The catchment area is differentiated into inflow (approximately dry land) areas and outflow (approximately wetland) areas. The model has a general structure, which can be used for all radionuclides or substances. It is simple to apply in practice since all driving variables may be readily accessed from maps and standard monitoring programs. The driving variables are: latitude, altitude, catchment area, mean annual precipitation and fallout. Note that for large catchments, this model does not require data on the characteristic soil type or the percentage of outflow areas (wet lands) in the catchment, as in most previous models, since in practice it is very difficult to obtain reliable data on characteristic soil type or percentage of outflow areas, especially in large and topographically complex catchments. Modelled values have been compared to empirical data from rivers sites covering a wide domain (catchment areas from 3000 to 3,000,000 km2, precipitation from 400 to 1700 mm/year; fallouts from 1600 to 280,000 Bq/m2; altitudes from 0 to 1000 m.a.s.l. and latitudes from 41 degrees to 72 degrees N). The river model with its sub-model for fixation predicts close to the uncertainty factors given by the empirical data, which have been shown to be about a factor of 1.6 for 137Cs and a factor of 2.2 for 90Sr in river water. The obtained characteristic uncertainty factors for 137Cs from the Chernobyl fallout is 2.4, for 137Cs from the NWT fallout it is 1.3 and for the 90Sr results from the NWT fallout it is 3 using the new model.     

Fibre crops as alternative land use for radioactively contaminated arable land

The transfer of radiocaesium, one of the most important and widespread contaminants following a nuclear accident, to the fibre crops hemp (Cannabis sativa L.) and flax (Linum usitatissimum L.) as well as the distribution of radiocaesium during crop conversion were studied for sandy soil under greenhouse and lysimeters conditions. Soil parameters did not unequivoqually explain the transfer factors (TF) observed. TFs to flax stems ranged from 1.34 to 2.80x10(-3) m2 kg(-1). TFs to seeds are about a factor of 4 lower. During the retting process for separating the fibres from the straw, more than 95% of the activity was removed with the retting water. For hemp, the TF to the stem was about 0.6x10(-3) m2 kg(-1). For hemp, straw and fibres were mechanically separated and TF to straw was about 0.5x10(-3) m2 kg(-1) and to fibres 1.0x10(-3) m2 kg(-1). Generally, the TFs to the useable plant parts both for hemp and flax, are low enough to allow for the production of clean end-products (fibre, seed oil, biofuel) even on heavily contaminated land. Given the considerable decontamination during retting, contamination levels in flax fibres would only exceed the exemption limits for fibre use after production in extreme contamination scenarios (>12,300kBq m(-2)). Since hemp fibres are mechanically separated, use of hemp fibres is more restricted (contamination <740kBq m(-2)). Use of stems as biofuel is restricted to areas with contamination levels of <250 and 1050kBq m(-2) for flax and hemp, respectively. Use of seeds for edible oil production and flour is possible almost without restriction for flax but due to the high TFs to seed observed for hemp (up to 3x10(-3) m2 kg(-1)) consumption of hemp seed products should be considered with care.     

Association of plutonium with sediments from the Ob and Yenisey Rivers and Estuaries

The present study applied sequential extraction techniques to investigate the binding and mobility of plutonium (Pu) in sediments from the rivers and estuaries of the Ob and Yenisey. As a study site, the Ob and Yenisey are particularly interesting as both rivers have weapons-grade Pu sources in their catchment areas, including the Russian Pu production and reprocessing plants at Mayak, Tomsk-7 and Krashnoyarsk, and the Semipalantinsk nuclear weapons testing site in Kazakhstan. Plutonium activity and ²⁴⁰Pu/²³⁹Pu ratios were determined using accelerator mass spectrometry (AMS). Sequential extractions showed that between 47 and 80% of the Pu in Yenisey River sediments and 35–53% of the Pu in soils around the Techa River are mobilized with weak oxidising agents, which can indicate that Pu is bound to organic material. In contrast, Pu in Ob and Yenisey Estuarine sediments was more strongly bound, with 60–100% being found in the HNO₃-extractable fraction. This change in speciation could reflect either that Pu bound to organic material in the Techa and Yenisey River sediments becomes more fixed to the sediments with time, or that organic-bound Pu is mobilized and released to the water when the sediments encounter the more saline water of the Ob and Yenisey estuaries. In general, ²⁴⁰Pu/²³⁹Pu ratios were relatively consistent between different extraction fractions, although, in whole sediments, an increase in ratio was observed with distance from the source. This reflects the increased influence of weapon fallout from catchment runoff within the river systems, as compared to the weapons-grade sources close to the production and reprocessing plants. Knowledge of Pu speciation in the Ob and Yenisey Rivers, and the processes controlling its behaviour in estuarine systems, can improve predictions of its transfer and subsequent environmental impact to Arctic Seas.     

The ameliorative effect of kaempferol against CdCl2- mediated renal damage entails activation of Nrf2 and inhibition of NF-kB

Environmental Science and Pollution Research - This study evaluated the nephroprotective effect of kaempferol against cadmium chloride (CdCl2) -induced nephropathy in rats. It also investigated if...     

Beyond ‘trees are good’: Disservices,management costs,and tradeoffs in urban forestry

The provision of ecosystem services is a prominent rationale for urban greening, and there is a prevailing mantra that ‘trees are good’. However, understanding how urban trees contribute to sustainability must also consider disservices. In this perspective article, we discuss recent research on ecosystem disservices of urban trees, including infrastructure conflicts, health and safety impacts, aesthetic issues, and environmentally detrimental consequences, as well as management costs related to ecological disturbances and risk management. We also discuss tradeoffs regarding species selection and local conservation concerns, as well as the central role of human perception in the interpretation of ecosystem services and disservices, particularly the uncritical assertion that ‘everybody loves trees’. Urban forestry decision-making that fails to account for disservices can have unintended negative consequences for communities. Further research is needed regarding life cycle assessments, stakeholder decision-making, return-on-investment, and framings of services and disservices in urban forestry.     

Our future in the Anthropocene biosphere

The COVID-19 pandemic has exposed an interconnected and tightly coupled globalized world in rapid change. This article sets the scientific stage for understanding and responding to such change for global sustainability and resilient societies. We provide a systemic overview of the current situation where people and nature are dynamically intertwined and embedded in the biosphere, placing shocks and extreme events as part of this dynamic; humanity has become the major force in shaping the future of the Earth system as a whole; and the scale and pace of the human dimension have caused climate change, rapid loss of biodiversity, growing inequalities, and loss of resilience to deal with uncertainty and surprise. Taken together, human actions are challenging the biosphere foundation for a prosperous development of civilizations. The Anthropocene reality—of rising system-wide turbulence—calls for transformative change towards sustainable futures. Emerging technologies, social innovations, broader shifts in cultural repertoires, as well as a diverse portfolio of active stewardship of human actions in support of a resilient biosphere are highlighted as essential parts of such transformations.     

Combined effects of human pressures on Europe’s marine ecosystems

Marine ecosystems are under high demand for human use, giving concerns about how pressures from human activities may affect their structure, function, and status. In Europe, recent developments in mapping of marine habitats and human activities now enable a coherent spatial evaluation of potential combined effects of human activities. Results indicate that combined effects from multiple human pressures are spread to 96% of the European marine area, and more specifically that combined effects from physical disturbance are spread to 86% of the coastal area and 46% of the shelf area. We compare our approach with corresponding assessments at other spatial scales and validate our results with European-scale status assessments for coastal waters. Uncertainties and development points are identified. Still, the results suggest that Europe’s seas are widely disturbed, indicating potential discrepancy between ambitions for Blue Growth and the objective of achieving good environmental status within the Marine Strategy Framework Directive.Supplementary informationThe online version of this article (10.1007/s13280-020-01482-x) contains supplementary material, which is available to authorized users.     

Certification of a long-term sampling system for PCDFs and PCDDs in the flue gas from industrial facilities

AMESA (adsorption method for sampling of dioxins) is a fully automatic system for long term monitoring of dioxin emissions from industrial processes based on the adsorption method. The system has been tested and undergoing a certification procedure according to the German guidelines for certification of systems for continuous monitoring of special substances. The certification covered parameters such as disposability of the system, reproducibility of the results and comparability of the sampling method with German and European standard methods. Furthermore break through, blanks and sample storability were investigated. The results prove that AMESA is a state of the art sampling system for continuous monitoring of dioxin/furan emissions.     

Development of a sample equilibration system for the TEOM continuous PM monitor

In recent years, scientific discussion has included the influence of thermodynamic conditions (e.g., temperature, relative humidity, and filter face velocity) on PM retention efficiency of filter-based samplers and monitors. Method-associated thermodynamic conditions can, in some instances, dramatically influence the presence of particle-bound water and other light-molecular-weight chemical components such as particulate nitrates and certain organic compounds. The measurement of fine particle mass presents a new challenge for all PM measurement methods, since a relatively greater fraction of the mass is semi-volatile. The tapered element oscillating microbalance (TEOM) continuous PM monitor is a U.S. Environmental Protection Agency (EPA) PM10 equivalent method (EQPM-1090079). Several hundred of these monitors are deployed throughout the United States. The TEOM monitor has the unique characteristic of providing direct PM mass measurement without the calibration uncertainty inherent in mass surrogate methods. In addition, it provides high-precision, near-real-time continuous data automatically. Much attention has been given to semi-volatile species retention of the TEOM method.